PMC554091B
Analyse refractory failures

This unit of competency covers analysing a refractory failure to determine failure mode. It involves understanding failure modes, differentiating different modes and understanding forensic procedures.

Application

Refractories may fail due to a number of reasons, and these may be mechanical (wear, impact) or thermal (thermal stresses, flame impingement) or due to other reasons. The analysis of failures is important so that replacement refractories can be better designed to reduce this failure and extend the time between failure/ replacement.

This unit covers all common types of refractory failures. The failure needs to be recognised and distinguished from other possible causes. Possible causes for the failure also need to be identified particularly if failure is unexpected/refractory life is shorter than expected

This unit would typically be undertaken by a technician working either alone or in liaison with another refractory expert.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Establish the suitability of resources

1.1. Check all information conforms with resources

1.2. Record discrepancies in information

1.3. Report any inaccuracies in information to the person in charge

1.4. Identify and select materials, components, tools and equipment

2. Analyse failure modes

2.1. Identify spalling modes

2.2. Identify corrosion mode

2.3. Identify abrasion modes

2.4. Identify impact/compression/tensile modes

3. Undertake forensic procedures

3.1. Plan required investigation

3.2. Specify required testwork/analyses

3.3. Interpret test results

3.4. Formulate simple reports

Required Skills

Required skills

Required skills include:

observing workplace procedures

identify and solving problems

working in a team or individually, as required

reading and numeracy to interpret workplace documents and technical information

Required knowledge

Required knowledge includes:

basis of various failure modes

organisation of simple testwork programs

make appropriate judgements on results

reporting results in report format

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

The unit will be assessed in as holistic a manner as is practical and may be integrated with the assessment of other relevant units of competency.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Competence must be demonstrated in the ability to recognise and analyse potential situations requiring action and then in implementing appropriate corrective action.

Consistent performance should be demonstrated. In particular look to see that:

investigation of a failure is undertaken and an evidence based conclusion as to the failure mode is developed.

Context of and specific resources for assessment

Assessment will require access to an operating plant over an extended period of time, or a suitable method of gathering evidence of operating ability over a range of situations.

Assessment will occur over a range of situations which will include disruptions to normal, smooth operation.

Simulation or case studies/scenarios may be required to allow for timely assessment of parts of this unit of competency. Simulation should be based on the actual plant and will include 'walk-throughs' of the relevant competency components. A bank of scenarios/case studies/what ifs and questions will be required to probe the reasoning behind observable actions.

Method of assessment

It may be appropriate to assess this unit concurrently with relevant teamwork and communication units.

It may be appropriate to assess this unit concurrently with other relevant units.

Where the analysis of refractory failure is to occur on-site or in a vessel then competency in the appropriate OHS and/or permit units is also required.

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Procedures

All operations are performed in accordance with standard procedures and work instructions

Investigation

Investigation involves:

the collection of evidence, and may require the specifying of appropriate tests and the analysis of plant records and logs

Reports

The report should summarise:

the nature of the failure

the cause

the methods used to determine this cause

conclusions drawn and recommendations made

Occupational health and safety (OHS)

All operations are subject to stringent OHS requirements and these must not be compromised at any time. Where there is an apparent conflict between performance criteria and OHS requirements, the OHS requirements take precedence


Sectors

Unit sector

Operational/technical


Employability Skills

This unit contains employability skills.


Licensing Information

Not applicable.