Application
This unit of competency describes the outcomes required to inspect, prepare and establish start up dry end operations in the pulp and paper industry.
This unit applies to operators and technicians who prepare and start up dry end operations in a pulp and paper manufacturing facility. This work typically involves complex integrated equipment and continuous operations. Dry end operations describe a range of systems and sub systems including drying processes, reeling operations, chemical additive system, monitoring systems, sheet treatment processes, tail feed systems, broke system, on-line coating systems, calendering systems, vacuum systems, laser systems, slitter systems, sheet transfer systems, accumulator, cleaning showers.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Determine production requirements | 1.1. Confirm planned production requirements and communicate to relevant personnel according to work health and safety (WHS), production requirements and Standard Operating Procedures (SOP). 1.2. Confirm availability of machine supplies. |
2. Inspect and prepare systems for startup | 2.1. Inspect systems for dry end operations. 2.2. Remove isolations, as required. 2.3. Set and confirm operational settings 2.4. Complete pre-start checkups. 2.5. Check and confirm operation of monitoring devices 2.6. Identify and rectify results. 2.7. Communicate start up to relevant personnel. |
3. Start up dry end operations | 3.1. Coordinate and implement start up for dry end operations. 3.2. Confirm system functions by monitoring plant, equipment and control system and display monitors. 3.3. Communicate process operations to relevant personnel. |
4. Establish startup at dry end | 4.1. Establish sheet and stabilise through dry end sections to parent reel. 4.2. Monitor and adjust systems to rectify variations from specifications. 4.3. Adjust and modify to stabilise sheet quality within specifications. 4.4. Record production start up, system operation, production and quality data. |
Evidence of Performance
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit, and must be able to provide evidence that they can:
prepare and start up dry end operations, at least twice in line with required enterprise intervals, by:
identifying and actioning problems within level of responsibility
identifying and monitoring process control points
planning and organising startups
monitoring and adjusting systems to rectify variations from specifications
using and interpreting electronic control systems, including Digital Control System (DCS), touch screens or robotics to control equipment and processes during operations
reporting on operational data.
communicating effectively, through written and verbal means, and working safely with others, in the work area when undertaking dry end operations.
Evidence of Knowledge
A person competent in this unit must be able to demonstrate knowledge of:
documentation and procedures relevant to dry end operations in the pulp and paper industry including:
work health and safety(WHS) including high risk load shifting licensing requirements
Standard Operating Procedures (SOP)
production needs including output targets, production scheduling quality requirements, resources and energy use, waste minimisation
quality procedures
environmental sustainability requirements/practices
machinery and plant manufacturing operating manuals
enterprise policies and procedures
Material Safety Data Sheets (MSDS)
oil or chemical spills and disposal guidelines
plant isolation documentation
safe work documentation
maintenance logs
job sheets
site agreements
safety instructions
process and instrument diagrams
machine manuals
troubleshooting guides
incident reports
materials and their uses in dry end operations including:
chemicals
compressed air
water
electricity
gas
steam
additives
machine clothing
ropes and belts
hazards and risks including steam and/or gas leaks, fires, nip points, compressed air, hot surfaces, electrical entanglement, slip hazards/falls, energy, pressures, chemicals, fumes, confined spaces and dust
dry end operations including drying processes, reeling operations, chemical additive system, monitoring systems, sheet treatment processes, tail feed systems, broke system, on-line coating systems, calendering systems, vacuum systems, laser systems, slitter systems, sheet transfer systems, accumulator and cleaning showers
dry end plant, processes, layout and associated services sufficient to carry out startup activities
electronic and other control systems, operation and application to make appropriate adjustments that control the dry end.
Assessment Conditions
The following resources must be made available:
access to the full range of equipment involved in integrated continuous manufacturing of dry end operations in a pulp or paper manufacturing facility
electronic control systems which includes Digital Control System (DCS), touch screens or robotics required to start up dry end systems
applicable work health and safety (WHS) and isolation work place procedures, environmental guidelines and safe working requirements, risks and hazard identification and workplace housekeeping requirements
personal protective equipment required for operating dry end systems
relevant personnel for the purposes of communicating information
sample workplace documentation, procedures and reports relevant to dry end operations including SOP, quality procedures ,environmental sustainability requirements/practices, plant manufacturing operating manuals, enterprise policies and procedures, oil or chemical spills and disposal guidelines, plant isolation documentation, safe work documentation.
Competency is to be assessed in the workplace or in a productive environment that accurately reflects performance in a workplace.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.
Foundation Skills
This section describes those core and employment skills that are essential to performance and are not explicit in the performance criteria. | |
Numeracy skills to: | interpret instruments, gauges and data recording equipment. |
Reading skills to: | read and interpret documentation, procedure manuals and test results. |
Writing skills to: | record operations and stabilizations accurately and legibly using correct technical vocabulary. |
Problem solving skills to: | maintain situational awareness in the work area analyse and use sensory information to adjust process to maintain and co-ordinate safety, quality and productivity. |
Technology skills to: | access, navigate and enter computer based information use electronic and other control systems to control equipment and processes for dry end operations. |
Range Statement
Not Applicable
Sectors
Pulp and Paper Manufacturing