- PRMWM01B - Plan waste audit
PRMWM01B
Plan waste audit
Application
Not Applicable
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA | ||
1 Determine audit objectives | 1.1 Consult client to determine waste audit requirements/purpose 1.2 Review waste audit objectives to ensure they are realistic and achievable 1.3 Document and confirm waste audit objectives with the client | ||
2 Scope waste audit site | 2.1 Obtain all information relating to site and client operations from relevant personnel to determine appropriate audit methodology 2.2 Assess the waste generation site to determine waste characteristics, disposal and recovery routes 2.3 Assess the waste generation site to determine hazards and risks and report to designated personnel | ||
3 Plan audit | 3.1 Take into consideration client requirements and sampling requirements necessary to audit methodology - valid and representative audit data 3.2 Determine suitable date, time and duration of audit to obtain valid and representative audit data and minimise client disruption 3.3 Incorporate details relating to access to site and specific site requirements into audit plan 3.4 Identify necessary personnel and equipment requirements to ensure effective, safe and efficient audit operations. This may include the services of relevant experts where advanced sampling or testing is required 3.5 Obtain full support and written authorisation from the client to proceed with waste audit in accordance with company requirements, appropriate legislation and safety procedures | ||
3.6 Identify, confirm and follow client confidentiality arrangements in accordance with client and company requirements and relevant legislation | |||
4 Document audit plan | 4.1 Document audit plan accurately with all necessary details to effectively conduct a waste audit 4.2 Complete and process other relevant documentation, such as waste management survey in accordance with assignment instructions 4.3 Obtain written approval for waste audit from the client in accordance with company requirements |
Required Skills
Refer to Evidence Guide
Evidence Required
Critical aspects of competency
Ability to determine a variety of audit objectives.
Effective consultation with client to obtain information and support for audit strategy.
Ability to thoroughly scope waste audit site.
Knowledge needed to achieve the performance criteria
Knowledge and understanding are essential to apply this unit in the workplace, to transfer the skills to other contexts, and to deal with unplanned events. The knowledge requirements for this unit are listed below.
Common reasons for undertaking a waste audit.
Nature and significance of waste minimisation hierarchy.
Waste types, streams and characteristics.
Waste disposal and recovery routes.
Waste audit plans.
Waste analytical methods.
Standards audit requirements and procedures.
Types of client waste management surveys and their uses.
Sampling techniques.
Client requirements.
OHS requirements.
Duty of care in provision of services.
Relevant industry standards.
Relevant legislation.
Relevant environmental regulations.
OHS hierarchy of control.
Specific skills needed to achieve the performance criteria
To achieve the performance criteria, some complementary skills are required. These are:
sound oral communication skills including questioning, listening, liaison and consultation
sound written communication skills for report writing and developing surveys
reading and interpreting maps, plans and documents
methodical organisation of work
site scoping
audit planning
computer skills
safe and efficient work practices
ability to apply appropriate decision-making techniques.
Other units of competency that could be assessed with this unit
This unit could be assessed on its own or in combination with other competencies relevant to the job function, for example:
PRMWM02B Carry out waste audit
PRMWM03B Review, evaluate and document waste assessment findings.
Resources required to assess this unit
The following resources should be available:
client audit requirements for workplace portfolio case studies if required
work plans and approved specifications
results of sampling
forms and procedure manuals
surveys, reports.
Gaining evidence to assess this unit
For valid and reliable assessment of this unit, the competency should be demonstrated over a period of time and be observed by the assessor (or assessment team working together to conduct the assessment). The competency is to be demonstrated in a range of situations, which may include customer/workplace interruptions and involvement in related activities normally experienced in the workplace.
Evidence of competency is best obtained by observing activities in the relevant environment and reviewing the planning of a waste audit under normal industry operating conditions. If this is not practicable, observations in realistic simulated environments may be substituted.
Consistency in performance
Audit requires that the plan meets the objectives of the client and that it complies with industry expectations in the particular client environment. If the environment is narrowly defined or is not representative of industry needs, it may be necessary to refer to portfolio case studies of a variety of waste requirements to assess competency in audit of waste plans.
Oral questioning or written audit and hypothetical situations (scenarios) may be used to assess underpinning knowledge. (In audit situations where the candidate is offered a preference between oral questioning and written audit, questions are to be identical.)
Supplementary evidence may be obtained from relevant authenticated correspondence from existing supervisors, team leaders or specialist training staff.
Note: All practical demonstrations must adhere to the safety and environmental regulations relevant to each state or territory.
Key competency levels
There are a number of processes that are learnt throughout work and life which are required in all jobs. They are fundamental processes and generally transferable to other work functions. Some of these are covered by the key competencies, although others may be added.
Information below highlights how these processes are applied in this competency standard.
1 | Perform the process | 2 | Perform and administer the process | 3 | Perform, administer and design the process | |||
How can communication of ideas and information be applied? | 2 | Discuss with clients and colleagues and demonstrate physically, appropriate use of waste audit methods. | ||||||
How can information be collected, analysed and organised? | 3 | Gather information from a number of sources (including regulatory sources and company specifications) about waste audit methods for accurate demonstrations to occur. | ||||||
How are activities planned and organised? | 3 | Plan in detail throughout audit, scoping of site, selecting audit methodology and developing waste management survey. | ||||||
How can teamwork be applied? | 1 | Discuss with clients and/or colleagues throughout consultations. | ||||||
How can the use of mathematical ideas and techniques be applied? | 2 | Compile survey results in specified manner which may include percentages. | ||||||
How can problem-solving skills be applied? | 1 | Discuss with clients their concerns throughout the waste audit processes while observing company requirements. | ||||||
How can the use of technology be applied? | 1 | Demonstrate understanding of technological principles and physical skills to use appropriate equipment. |
Range Statement
The range statement links the required knowledge and organisational and technical requirements to the workplace context. It describes any contextual variables that will be used or encountered when applying the competency in work situations. It allows for different work practices and work and knowledge requirements as well as for differences between organisations and workplaces. The following variables may be present for this particular unit.
Audit methodology includes:
audit scope
client waste management survey
determining sort categories
elimination of other variables
isolation of waste streams
method of recording information
sample required.
Client includes all forms of business enterprises in this context including government agencies, internal customers, local governments/councils, private and public companies, and residents/ratepayers
Client requirements are found in briefing papers, letters from client, quality assurance documents, tender/contract documents and verbal or written instructions
Equipment requirements include:
absorbent material
bunding equipment
camera
collection containers
lifting gear
measurement equipment
personal protective equipment
reference manuals
safety barriers and warning signs
sample bench
scales.
Guidelines on use of waste management survey:
develop appropriate survey questions in accordance with the waste audit objectives
ensure survey questions are able to be completed within the time allowed by the client
obtain client authorisation for survey in accordance with company requirements
write clear survey instructions and questions for the target group.
Information relating to site and client operations must include:
access to site and specific site requirements
locations of waste containers
map of plant/site
processing methods
production dates and schedules
production inputs and outputs
site size
storage and disposal methods
waste handling
waste hazards
waste outputs
waste recovery routes
waste streams.
Performance of this unit is carried out in accordance with relevant requirements of the following:
Australian Standards
environmental regulations
legislative requirements
manufacturers' specifications
OHS regulations
organisational procedures
relevant state/territory regulations.
Personal protective equipment may include:
breathing apparatus
gloves
goggles/safety glasses
overalls
protective headwear
safety shoes.
Personnel requirements include licences required, skills of personnel and training/briefing.
Site may include business premises, landfill site, local government area, plant/factory and waste processing plant.
Waste audit requirements/purpose may include but are not limited to:
cost reductions
develop waste management plan
environmental concerns
identify recyclable waste
identify waste management policy
identify waste streams
process review
review implementation of waste management plan
waste minimisation.
Waste characteristics include but are not limited to:
building material
chemicals
general garbage
household waste
industrial
medical
metal
paper.
Waste management survey could typically include checklist, focus group, questionnaire and survey.
Waste site purpose includes but is not limited to:
contamination
dangerous and hazardous wastes
disposal methods
production of waste
recycling
re-use
waste generation
waste streams
waste types.
Sectors
Not Applicable
Employability Skills
Not Applicable
Licensing Information
Not Applicable