Application
This competency normally applies to the individual who is required to conduct an inspection on all types of explosive ordnance in order to assess its condition and to process the explosive ordnance for further action. The inspection of the explosive ordnance is carried out in a logical sequence while adhering to all relevant occupational health and safety (OH&S) requirements. How the explosive ordnance is processed is subject to the outcomes of the inspection. In the case of defective or damaged explosive ordnance it may be retained and returned to the manufacturer, maintained or disposed of, or restrictions may be placed on its use. | |
Prerequisites
Pre-requisite Unit/s | Nil |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare for inspection | 1.1 Requirement for explosive ordnance inspection is identified from work requests/instructions and confirmed 1.2 OH&S requirements, including those contained in organisational procedures, are applied throughout the operation 1.3 Technical references, tools and equipment required for the inspection are identified, acquired and prepared in accordance with organisation procedures 1.4 Explosive ordnance is acquired, identified and accounted for, moved or pre-positioned in preparation for inspection 1.5 Net explosive quantities and compatibility are identified, calculated, assessed and applied throughout the operation |
2. Inspect explosive ordnance | 2.1 Explosive ordnance is inspected in a logical set sequence to ensure that defects or damage are not overlooked in accordance with organisation policy and procedures and technical specifications 2.2 Damage or other defects are identified and recorded in accordance with organisation procedures |
3. Carry out post inspection procedures | 3.1 Explosive ordnance is processed in accordance with organisation procedures 3.2 Documentation and records are maintained in accordance with statutory, organisation and workshop requirements |
Required Skills
This describes the essential skills and knowledge and their level, required for this unit. |
Required Skills |
apply compatibility constraints apply safety policies and structures apply OH&S requirements calculate net explosive quantity communicate orally and in writing maintain documentation read, access, interpret and apply technical instructions and drawings related to explosive ordnance inspections use relevant tools and equipment |
Required Knowledge |
assessment of compatibility calculation of net explosive quantity characteristics and limitations of explosive ordnance to be inspected inspection procedures organisational documentation requirements organisationalOH&S requirements organisational safety policies and structures |
Evidence Required
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessment must confirm the ability to comply with: organisational safety requirements appropriate legislative and regulatory requirements. Assessment must also confirm the ability to work safely within an explosive ordnance environment and to: calculate and apply net explosive quantity assess and apply compatibility process explosive ordnance maintain documentation. Consistency in performance Competency should be demonstrated in a range of actual or simulated explosive ordnance contexts. |
Context of and specific resources for assessment | Context of assessment Competency should be assessed in the workplace or in a simulated work environment, in accordance with all relevant legislation and organisation requirements. Specific resources for assessment Access is required to: facilities and resources used in the storage, distribution or maintenance of explosive ordnance, including a licensed explosive site. |
Method of assessment | This unit may be assessed with the following unit: PUADEFEO101D Work safely with explosive ordnance. In a public safety environment assessment is usually conducted via direct observation in a training environment or in the workplace via subject matter supervision and/or mentoring, which is typically recorded in a competency workbook. Assessment is completed using appropriately qualified assessors who select the most appropriate method of assessment. Assessment may occur in an operational environment or in an industry-approved simulated work environment. Forms of assessment that are typically used include: direct observation interviewing the candidate journals and workplace documentation third party reports from supervisors written or oral questions. |
Range Statement
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. | |
Explosive ordnance inspections may be conducted | As part of a work program On direction On receipt Prior to maintenance Prior to or post any activity And may include inspection to confirm free from explosives, the use of special measuring devices, gauges and locally patented tools |
Organisation may include | Defence organisation Enterprises that work with explosive ordnance Other government departments or instrumentalities that work with explosive ordnance |
Technical references may include | Technical drawings Technical reference pamphlets Orders and instructions Other publications |
Net explosive quantities include | Explosive capacity calculated in a wide range of activities related to the storage, distribution and maintenance of explosive ordnance |
Compatibility is | Assessed in a wide range of activities related to the storage, distribution and maintenance of explosive ordnance and other hazardous materials |
Inspection may result in explosive ordnance being | Passed for use Recommended for sentencing Rejected |
Explosive ordnance defects or damage may include | Non-compliance with technical specifications Corrosion Surface damage |
Processing may include | Disposal, including: jettisoning ditching destruction restrictions on use Retention for return or maintenance |
Documentation and records may include | Receipt and issue records Timesheets Work records |
Sectors
Not applicable.
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.