Application
This unit describes a participant’s skills and knowledge required to conduct bitumen tanker operations in Civil Construction.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Elements and Performance Criteria
1. Plan and prepare for bitumen tanker operations | 1.1 Access, interpret and apply bitumen tanker operations documentation and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures 1.4 Select and wear personal protective equipment appropriate for work activities 1.5 Select and check for faults plant, tools and equipment to carry out tasks 1.6 Confirm and apply environmental protection and safety requirements 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Set up tanker for operation | 2.1 Carry out pre-operational checks on bitumen tanker 2.2 Fill ancillary tanks and ensure adequate materials are available to perform tanker operations 2.3 Check tanks to prevent contamination 2.4 Obtain load details, including correct amount of any additives |
3. Load tanker | 3.1 Carry out pre-start and start-up procedures 3.2 Drive and operate tanker 3.3 Check previous load details for compatibility 3.4 Load tank with the prescribed amount of material 3.5 Add and mix additives to specifications 3.6 Check temperature of the material and ensure compliance with manufacturer’s specifications 3.7 Measure, calculate and record material quantities and additives 3.8 Heat materials in accordance with manufacturer’s/suppliers’ instructions |
4. Transfer materials | 4.1 Set up transfer site 4.2 Confirm transfer procedures with depot supervisor/sprayer driver 4.3 Transfer materials 4.4 Record details of transferred materials |
5. Empty tanker | 5.1 Empty tank into storage or waste 5.2 Clean tank interior |
6. Carry out operator maintenance | 6.1 Prepare machine for maintenance 6.2 Conduct inspection and fault finding 6.3 Carry out scheduled maintenance tasks 6.4 Process written maintenance records |
7. Clean up | 7.1 Clear work area and dispose of or recycle materials 7.2 Clean, check, maintain and store plant, tools and equipment 7.3 Carry out housekeeping requirements |
Evidence of Performance
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable legislation, documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of the conduct of bitumen tanker operations including:
select and use relevant tools and equipment safely
identify and report on hazards related to the worksite and work activity
works effectively with others to undertake and complete the conduct of bitumen tanker operations that meets all of the required outcomes including:
complying with written and verbal reporting requirements and procedures
communicating clearly and concisely with others to receive and clarify work instructions
communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities
demonstrates completion of conducting bitumen tanker operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
transfer a minimum of three (3) different materials, one of which must be a PMB;
loaded from a refinery or depot
mixed and heated
transferred to at least one roadside and one storage depot
calculation and recording of all details for the activities
compliance with the instructions for transferring listed in Austroads Bitumen Sealing Safety guide
Evidence of Knowledge
The candidate must demonstrate knowledge in conducting bitumen tanker operations through:
accessing, interpreting and applying legislative, organisation and site requirements and procedures for:
site and equipment safety requirements
heating bitumen
housekeeping
equipment types, characteristics, technical capabilities and limitations
understanding bituminous materials and their characteristics
complying with the operational, maintenance and basic diagnostic procedures
safety data sheets and materials handling methods
understanding the treatment for bitumen burns
complying with the quality requirements and environmental systems and standards
understanding the handling and safe use of bitumen hoses
preparing and/or implementing JSAs/JSEA/safe work method statements
Assessment Conditions
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years | |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Sectors
Civil construction