Application
This unit is appropriate for those working in an operational role at worksites within:
Civil construction
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare | 1.1. Access, interpret and apply compliance documentation relevant to the boring of cast in-situ piles 1.2. Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task 1.3. Identify, obtain and implement signage requirements from the project traffic management plan 1.4. Select plant, tools and equipment to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults 1.5. Identify environmental protection requirements from the project environmental management plan, and confirm and apply to the allotted task |
2. Locate and prepare pile positions | 2.1. Establish location for piles from reference points and set out according to requirements 2.2. Position and check plant and related equipment for operation in accordance with standard operating procedures 2.3. Bore hole to job specification 2.4. Check caisson for conformity with design specifications 2.5. Install caisson in the bored hole 2.6. Prepare caisson to receive concrete |
3. Place concrete | 3.1. Place concrete into caisson 3.2. Vibrate concrete, removing voids and air pockets to job specifications |
4. Remove boring rig | 4.1. Relocate boring rig to next point of installation operation 4.2. Remove boring rig from site on completion of work |
5. Clean up | 5.1. Clear work area and dispose of or recycle materials in accordance with project environmental management plan 5.2. Clean, check, maintain and store plant, tools and equipment |
Required Skills
Required skills |
Specific skills are required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes the ability to carry out the following, as required to bore cast in-situ piles: apply legislative, organisation and site requirements and procedures for boring cast in-situ piles organise work activities select and use relevant tools and equipment safely identify and report on hazards related to the worksite and work activity communicate effectively to receive and clarify work instructions |
Required knowledge |
Specific knowledge is required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes knowledge of the following, as required to bore cast in-situ piles: site and equipment safety requirements foundation work bored cast in-situ piles and their installation techniques scaffolding and work platform installation construction principles processes for interpreting engineering drawings soil, sand, rock, clay, shale, gravel and silt types and characteristics water erosion processes for installing piles in water equipment types, characteristics, technical capabilities and limitations operational, maintenance and basic diagnostic procedures site isolation and traffic control responsibilities and authorities materials safety data sheets and materials handling methods project quality requirements civil construction terminology JSAs/safe work method statements |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following: knowledge of the requirements, procedures and instructions for the conducting cast in-situ piling operations implementation of requirements, procedures and techniques for the safe, effective and efficient conducting cast in-situ piling operations, which is to include: preparation and boring of a hole to install a minimum of one caisson, including reinforcement construction and placing concrete to that caisson working with others to conduct cast in-situ piling operations that meet all of the required outcomes consistent timely completion of cast in-situ piling operations that safely, effectively and efficiently meets the required outcomes |
Context of and specific resources for assessment | This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills. Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances. The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job. Customisation of assessment and delivery environment to sensitively accommodate cultural diversity. Aboriginal people and other people from a non English speaking background may have second language issues. Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required. |
Method of assessment | This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods: written and/or oral assessment of the candidate's required knowledge observed, documented and/or first hand testimonial evidence of the candidate's: implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes, including: preparation and boring of a hole to install a minimum of one caisson, including reinforcement construction and placing concrete to that caisson consistent achievement of required outcomes first hand testimonial evidence of the candidate's: working with others to undertake and complete the boring of cast in-situ piles |
Guidance information for assessment | Consult the SkillsDMC User Guide for further information on assessment including access and equity issues. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant compliance documentation may include: | legislative, organisational and site requirements and procedures manufacturer's guidelines and specifications Australian standards Employment and workplace relations legislation Equal Employment Opportunity and Disability Discrimination legislation |
Safety requirements may include: | OHS requirements are to be in accordance with state or territory legislation and regulations, organisational safety policies and procedures, and project safety plan. This may include protective clothing and equipment, use of tools and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, use of First Aid equipment, hazard control and hazardous materials and substances safe operating procedures are to include but not be limited to recognising and preventing hazards associated with overhead and underground services, other machines, personnel, traffic control, working in proximity to others, worksite visitors and the public hazards and risks may include but not be limited to uneven/unstable terrain, fires, overhead and underground services, excavations, traffic, embankments, cuttings, structures and hazardous materials emergency procedures related to equipment operation are to include but may not be limited to emergency shutdown and stopping, extinguishing equipment fires, organisational First Aid requirements and evacuation safe parking practices are to include but not be limited to ensuring access ways are clear, equipment/machinery is away from overhangs and refuelling sites, safe distance from excavations, and secured from unauthorised access or movement |
Site may include: | new construction sites existing structures being renovated or extended existing structure subject to service restoration or maintenance road works earthworks wharves marine bridges foundation |
Signage may include: | escort vehicle highway traffic signs site safety signage temporary signage for the benefit of motorists and pedestrians barricades traffic conditions signage |
Traffic may include: | congested urban environments low traffic rural areas off-road un-trafficked areas buildings parking sites pedestrian areas |
Plant, tools and equipment may include: | augers shovels crow bars measuring tapes spirit levels plumb bobs compressors concrete vibrators high pressure hoses scaffolding |
Environmental requirements may include: | organisational/project environmental management plan waste management water quality protection noise vibration dust and clean-up management |
Piles may include: | bored cast in-situ may include compressed and grout crete piles |
Bore may include: | auger water jetting |
Caisson may include: | cleaning and installation of reinforcement |
Materials may include: | reinforced steel caissons concrete |
Sectors
Foundation Works
Competency Field
Refer to Unit Sector(s).
Co-Requisites
Not applicable.
Employability Skills
This unit contains employability skills.
Licensing Information
Refer to Unit Descriptor.