Application
This unit describes a participant’s skills and knowledge required to install or replace super-structure members in Civil Construction.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Elements and Performance Criteria
1. Plan and prepare to install or replace super-structure members | 1.1 Access, interpret and apply install or replace super-structure members documentation and ensure the work activity is compliant 1.2. Obtain, interpret, clarify and confirm work instructions before proceeding 1.3. Confirm and apply environmental protection and safety requirements 1.4. Obtain, interpret and implement traffic management signage 1.5. Select and check for faults plant, tools and equipment to carry out tasks 1.6. Select and wear correct personal protective equipment appropriate for work activities 1.7. Identify, confirm, safely handle and locate, ready for use, materials required for the work application 1.8. Identify, address and report hazards, risks and environmental issues 1.9. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Install temporary supports | 2.1. Locate and level bed logs in place 2.2. Bolt temporary headers to the girders 2.3. Position toms and jacks on the bed logs 2.4. Install temporary bracing 2.5. Loosen or cut existing bolts to allow movement and access 2.6. Jack structure to allow removal of defective part |
3. Install or replace members | 3.1. Remove defective part/s avoiding damage to surrounding members and other workers 3.2. Measure and prepare members for installation or replacement 3.3. Fit new members 3.4. Apply durability treatments to the new members 3.5. Install connectors to the new super-structure members 3.6. Remove temporary supports after new members are secured in place 3.7. Remove temporary headers and bed logs and return bridge to its normal settle point |
4. Clean up | 4.1. Clear work area and dispose of or recycle materials 4.2. Clean, check, maintain and store machinery, tools and equipment |
Evidence of Performance
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable legislation, documentation, policies and procedures
works effectively with others to undertake and complete the installation or replacement of super-structure members that meets all of the required outcomes including:
communicating clearly and concisely with others to receive and clarify work instructions
using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone
demonstrates completion of installing or replacing super-structure members that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
identifying, reporting and recording hazards and risks
installing and removing temporary supports
selecting and preparing timber
applying preservatives
marking out and cutting to size of at least one (1) corbel or girder for a super-structure
Evidence of Knowledge
The candidate must demonstrate knowledge of installing or replacing super-structure members through:
applying legislative, organisational and site requirements and procedures for:
site and equipment safety requirements
temporary support member installation
connection behaviour
shoring and jacking systems
timber grading
test boring
bridge foundations
bridge heritage
calculation of material requirements
equipment types, characteristics, technical capabilities and limitations
operational, maintenance and basic diagnostic procedures
site isolation and traffic control responsibilities and authorities
safety data sheets and materials handling methods
quality assurance systems and standards
JSA/JSEA/safe work method statements
Assessment Conditions
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years | |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. | |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Sectors
Civil construction