Core drilling may also be called wireline core drilling, diamond drilling or coring. It is used for environmental, geotechnical and mineral exploration drilling. This unit is appropriate for those working in as drillers assistants, at worksites within:
Drilling
Not applicable.
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare for assisting with diamond core drilling | 1.1. Access, interpret and apply compliance documentation relevant to the work activity 1.2. Obtain, confirm and apply work instructions for the allocated task 1.3. Identify, manage and report all potential hazards 1.4. Resolve coordination requirements with others at the site prior to commencing and during work activities 1.5. Load, unload, move, handle and store core drilling equipment and all associated tools, sampling devices and connecting equipment 1.6. Set up and stabilise racks 1.7. Wear all necessary personal protective equipment and protective clothing when assisting with core drilling |
2. Support the core drilling process | 2.1. Assemble core barrel components under the direction of the driller 2.2. Prepare drill string in readiness for tripping and drilling 2.3. Add and remove drill rods and core inner tubes 2.4. Inspect inner tube and core barrel regularly and replace worn or damaged components under the direction of the driller 2.5. Observe housekeeping and site safety measures while supporting core drilling operations 2.6. Use rod and casing handling equipment according to recommended procedures 2.7. Store and handle diamond tools according to policy |
3. Handle core samples | 3.1. Dismantle inner tube for recovery of core samples 3.2. Take necessary safety precautions when handling potentially contaminated samples 3.3. Remove core samples from inner tube and place in core trays in correct sequence 3.4. Record information on core marker blocks and core box accurately and legibly 3.5. Take precautions to ensure no surface contamination of cores and delicate cores are preserved 3.6. Follow safe stacking procedures for core boxes during storage and transportation 3.7. Apply appropriate lifting techniques when lifting full core boxes 3.8. Clean and lubricate inner tube components and re-assemble in preparation for the next run |
4. Mix drilling fluids | 4.1. Wear appropriate protective clothing when mixing drilling fluids 4.2. Check labels and read and interpret safety information and hazard codes 4.3. Apply correct mixing procedure for the drilling fluid 4.4. Carry out storage of drilling mud components and additives safely and according to recommendations 4.5. Perform basic tests on drilling fluids and record and report the results |
5. Carry out basic maintenance of tools and equipment | 5.1. Perform inspection and checks on serviceability of core barrel components 5.2. Perform inspections and routine checks on ancillary equipment 5.3. Perform inspections and basic maintenance on rod handling equipment 5.4. Observe occupational health and safety procedures in carrying out equipment maintenance and use correct personal protective equipment 5.5. Fit restraining devices to Kelly hoses |
Required skills |
Specific skills are required to achieve the performance criteria in this unit, particularly for the application in the various circumstances in which this unit may be applied. This includes the ability to carry out the following as required to assist with diamond core drilling: apply legislative, organisation and site requirements and procedures measure and identify core bits, reamer shells and related components identify thread types identify bits to suit apply safe storage requirements for diamond tools use various rod handling equipment and methods apply add and removal techniques for drill rods to the line string apply refuelling procedures for vehicles, drill rigs and ancillary equipment identify correct lubricants apply correct handling of samples apply good housekeeping principles correctly identify and mix drill fluids apply basic maintenance of mud and/or water delivery pumps |
Required knowledge |
Specific knowledge is required to achieve the performance criteria of this unit, particularly its application in a variety of circumstances in which the unit may be used. This includes knowledge of the following as required to assist with diamond core drilling: occupational health, safety and environment issues reasons for identification and care of samples including storage and transport information to be placed on core boxes/core marker blocks diamond coring equipment, components and nomenclature requirements for collaring of bore holes, including equipment, methods, seals and installation collection of sludge and chip samples procedures and maintenance of stuffing boxes and/or 'T' pieces mud pumps and their applications basic knowledge of bit types and their applications to different geological conditions basic knowledge of fluid circulation system and its effect on hole integrity and sample quality |
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following: knowledge of the requirements, procedures and instructions for assisting with diamond core drilling implementation of requirements, procedures and techniques for the safe, effective and efficient completion of assisting with diamond core drilling working with others to undertake and complete the assisting with diamond core drilling that meets all of the required outcomes consistent timely completion of assisting with diamond core drilling that safely, effectively and efficiently meets the required outcomes |
Context of and specific resources for assessment | This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills. The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job. Customisation of assessment and delivery environment to sensitively accommodate cultural diversity. Aboriginal people and other people from a non English speaking background may have second language issues. Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances. Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required. |
Method of assessment | This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods: written and/or oral assessment of the candidate's required knowledge observed, documented and/or first hand testimonial evidence of the candidate's: implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes consistently achieving the required outcomes first hand testimonial evidence of the candidate's: working with others to undertake and complete the assisting with diamond core drilling |
Guidance information for assessment | Consult the SkillsDMC User Guide for further information on assessment including access and equity issues. |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant compliance documentation may include: | legislative, organisational and site requirements and procedures manufacturer's guidelines and specifications Australian standards code of practice Employment and Workplace Relations legislation Equal Employment Opportunity and Disability Discrimination legislation |
Work instructions may come from: | briefings, handovers, plans and work orders and may be written or verbal, formal or informal and may include: nature and scope of tasks specifications quality of finished works achievement targets operational conditions obtaining of permits required site layout out of bounds areas worksite inspection requirements lighting conditions plant or equipment defects hazards and potential hazards coordination requirements or issues contamination control requirements environmental control requirements barricade and signage requirements |
Hazards may include: | release of gases from formation or samples obtained spread of contaminants as a result of drilling or cleaning processes change in the chemistry of contaminants as a result of drilling and recovery of the core samples working in proximity to drilling rig entanglement in rotating rods or casing blowout of inner barrel splits string makeup and breakout hazards hazards with the use of grout mixers, pumps |
Coordination requirements may include: | driller other equipment operators maintenance personnel supervisors worksite personnel |
Personal protective equipment may include: | steel-capped boots and hardhat gloves dust mask eye and hearing protection general protective and reflective clothing |
Core barrel may include: | double tube wireline core barrels triple tube wireline core barrels starter barrels SPT sampling barrels chrome barrel |
Components may include: | Drill bits blade bits tricone bits PCD bits surface set diamond core bits and reamers impregnated diamond core bits and reamers |
Drill rods may include: | wireline drill rod casing barrel and inner tube component threads API and IF threads 'Q' series threads |
Rod and casing handling equipment may include: | manual handling mechanised rod handlers hydraulic rod/casing spinners hoisting plugs hook and clam shell foot clamps (hydraulic or manual) |
Casing type may include: | steel casing PVC casing |
Samples may include: | core samples sludge samples from coring and rotary drilling chip samples |
Records may include: | note book plastic bags (write on) hole logs run sheets shift report book diaries core blocks core trays |
Recorded information may include: | project number hole number tray number depth (per client and company requirements) core loss details (i.e. depth interval) core breaks (made by hammer during removal from inner tube) |
Drilling fluids and additives may include: | drill mud and additives soluble oil lost circulation material |
Basic tests on drilling fluid may include: | viscosity mud weight use of marsh funnel and cup |
Core barrel components may include: | outer tube inner tube split tubes (as required) core lifter case and core lifter head assembly overshot assembly |
Drilling (General)
Refer to Unit Sector(s).
Not applicable.
This unit contains employability skills.
Refer to Unit Descriptor.