Application
This unit describes a participant’s skills and knowledge required to conduct gold room operations in Metalliferous mining.
This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Elements and Performance Criteria
1. Plan and prepare for gold room operation | 1.1 Access, interpret and apply documentation and procedures for conducting gold room operations and ensure the work activity is compliant 1.2 Receive, interpret and clarify shift changeover details 1.3 Communicate job requirements with other personnel 1.4 Select and wear personal protective equipment appropriate for work activities 1.5 Select appropriate type of auxiliary equipment for work activities 1.6 Perform equipment pre-start checks 1.7 Identify, address and report potential risks and hazards 1.8 Identify, address and report environmental issues 1.9 Adhere to emergency procedures 1.10 Use dust suppression and extraction methods 1.11 Ensure area is well ventilated |
2. Start-up equipment in sequence | 2.1 Carry out start-up procedures and complete start-up checks according to plant configurations and system requirements 2.2 Confirm plant is operational |
3. Operate and monitor smelting equipment | 3.1 Read and interpret data from equipment indicators 3.2 Continuously inspect operations/plant and containment areas for defects and potential problems 3.3 Read and interpret analysis reports 3.4 Add reagents according to site procedures 3.5 Adjust equipment to operating parameters 3.6 Observe and follow electrical and/or gas safety techniques 3.7 Carry out operator level maintenance 3.8 Complete all required documentation 3.9 Pass on end of shift information verbally or in writing to incoming shift 3.10 Adhere to site security procedures |
4. Prepare electrowinning products for smelting | 4.1 Treat stripping products in preparation for smelting - fluxing and/or drying 4.2 Record all required information |
5. Shutdown in sequence and/or isolate equipment | 5.1 Shutdown or isolate equipment based on process and safety requirements 5.2 Perform post shutdown/isolation checks |
6. Conduct housekeeping activities | 6.1 Clear work area and dispose of, or recycle materials 6.2 Clean and maintain condition of equipment, ensure suitability for use, and address/report issues 6.3 Manage and/or report hazards, and maintain a safe working environment 6.4 Maintain records of gold room processes in accordance with site procedures |
Evidence of Performance
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of conducting gold room operations including:
identifying and managing hazards correctly
handling hazardous substances correctly
identifying and applying dust suppression and extraction methods
identifying and managing ventilation systems
demonstrates completion of conducting gold room operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
performing start up in sequence on equipment to meet job requirements
operating and monitoring smelting equipment to meet job requirements
reading equipment indicators
adjusting equipment to maintain optimum output
preparing electrowinning products for smelting
shutting down and/or isolating the equipment in sequence
performing routines checks on equipment
maintaining required documentation and records
Evidence of Knowledge
The candidate must demonstrate knowledge of the following in applying the Conduct gold room operations through:
breakdown procedures
elution process
smelting process
use of fluxes
record keeping
handling requirements for gold concentrates
security requirements for gold processing
emergency procedures
environmental principles
equipment limitations and operating parameters
equipment safety requirements
hazardous substance procedures and consequences of spills
identifying repair requirements
isolation procedures
metallurgical and technical data
OHS procedures
specific operational procedures and checks
pumping systems
sampling
gold room safety requirements
types of ores
the effects of wet and dry concentrates
Assessment Conditions
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years | |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. | |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Sectors
Metalliferous mining