Screening and conveying operations can be conducted with fixed, mobile or portable plants. This unit is appropriate for those working in operational roles, at worksites within:
Extractive industries
Metalliferous mining
Not applicable.
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare for operations | 1.1. Access, interpret and apply compliance documentation relevant to conducting screening and conveying operations 1.2. Obtain, interpret and clarify work requirements for the satisfactory completion of operations 1.3. Inspect and prepare work area in coordination with others to work requirements and legislative, site and manufacturer's requirements and procedures |
2. Operate the screening plant | 2.1. Resolve coordination requirements with others at the site prior to commencing and during work activities 2.2. Carry out pre-start, start-up and shutdown procedures 2.3. Relocate plant (if applicable) 2.4. Prepare plant for operation in accordance with work requirements 2.5. Select and modify the operating technique to appropriately meet changing work conditions 2.6. Conduct, control and monitor operations within the equipment limitations, maintaining screening efficiency an effectiveness 2.7. Act on or report monitoring systems and alarms 2.8. Recognise and respond to hazardous and emergency situations 2.9. Complete work in accordance with the agreed plan and outcomes and within the operating capacity of the allocated equipment. |
3. Carry out post-operational procedures | 3.1. Inspect, fault find and report 3.2. Carry out operational maintenance, servicing, lubricating and housekeeping tasks 3.3. Maintain, process and pass on records and reports |
Required skills |
Specific skills are required to achieve the performance criteria in this unit, particularly for the application in the various circumstances in which this unit may be applied. This includes the ability to carry out the following as required to conduct screening and conveying operations: apply legislative, organisation and site requirements and procedures apply operational safety requirements access, interpret and apply technical information applying the plant operating procedures apply production and equipment records maintenance requirements apply diagnostic techniques use relevant hand tools work wearing personal protective equipment |
Required knowledge |
Specific knowledge is required to achieve the Performance Criteria of this unit, particularly its application in a variety of circumstances in which the unit may be used. This includes knowledge of the following, as required to conduct screening and conveying operations: site hazard identification and response procedures site risk control procedures site and equipment health and safety procedures site environmental requirements and constraints site quality requirements site communication procedures site product characteristics site operational procedures plant pre-start, start-up, operating and shutdown procedures and techniques plant components functions, characteristics, technical capability and limitations plant breakdown procedures plant isolation procedures site record keeping requirements site confine space work procedures site personal protective equipment requirements contaminant identification |
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following: knowledge of the requirements, procedures and instructions for the conducting of screening and conveying operations implementation of requirements, procedures and techniques for the safe, effective and efficient completion of screening and conveying operations working with others to undertake and complete screening and conveying operations that meet all of the required outcomes consistent timely completion of screening and conveying operations that safely, effectively and efficiently meets the required outcomes |
Context of and specific resources for assessment | This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills. The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job. Customisation of assessment and delivery environment to sensitively accommodate cultural diversity. Aboriginal people and other people from a non English speaking background may have second language issues. Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular work sites may differ due to site circumstances. Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required. |
Method of assessment | This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods: written and/or oral assessment of the candidate's required knowledge observed, documented and/or first hand testimonial evidence of the candidate's: implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes consistently achieving the required outcomes first hand testimonial evidence of the candidate's: working with others to undertake and complete the screening and conveying operations |
Guidance information for assessment | Consult the SkillsDMC User Guide for further information on assessment including access and equity issues. |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant compliance documentation may include: | legislative, organisation and site requirements and procedures manufacturer's guidelines and specifications Australian standards code of practice Employment and workplace relations legislation Equal Employment Opportunity and Disability Discrimination legislation |
Geological may include: | rock type and characteristics faults and joints water tables or other water sources |
Survey data may include: | floor heights bench widths grades |
Work requirements may come from briefings, handovers, and work orders and may include: | product details nature and scope of tasks achievement targets operational conditions geological data site survey data site layout and out of bounds areas worksite inspection requirements lighting conditions plant or equipment defects hazards and potential hazards coordination requirements or issues |
Inspect and prepare work area may include: | identification of hazards selection and implementation of control measures for the hazards identified safeguarding site and non-site personnel by: erection of barricades and posting of signs selection of appropriate equipment to ensure personnel safety and protection determination of appropriate path of movement for equipment floor, pad, access roads, ramps and bench requirements |
Coordination with others may include: | yard persons laboratory personnel mobile plant operators maintenance personnel |
Pre-start, start-up and shutdown procedures may include: | walk around check of the plant checking and toping up fluid levels (including fuel) lubrication inspection of attachments to ensure security and identify defects instrument and control lever checks reporting defects and damage follow prescribed start-up sequence confirm plant is operational following prescribed shutdown sequence securing equipment |
Relocate plant may include: | dismantling packing up assisting in loading onto transport hitching to plant for towing |
Prepare plant for operation may include: | assisting in unloading from transport unpacking and assembling fitting, adjusting and tracking belts stabilising the plant |
Operating technique may include: | feed control working safely around other machines and personnel |
Changing work conditions may include: | material types feed grading feed contamination weather conditions day and night |
Hazardous and emergency situations may include: | confined spaces working alone personal injury unplanned shutdown environmental chemical fire electrical dust noise |
Operational maintenance, servicing, lubricating and housekeeping tasks may include: | scheduled servicing changing wear components greasing equipment adjustments cleaning disposal of environmentally sensitive fluids and materials application of chemical and fuel safety measures |
Processing (General)
Refer to Unit Sector(s).
Not applicable.
This unit contains employability skills.
Refer to Unit Descriptor.