ELEMENT

PERFORMANCE CRITERIA

1. Plan and prepare for testing

1.1. Access, interpret and apply compliance documentation relevant to testing of operational functions for vehicles and equipment

1.2. Obtain, interpret and clarify work requirements before proceeding

1.3. Access, interpret and apply geological and survey data required to complete the allocated work

1.4. Identify and confirm testing requirements

1.5. Identify and obtain resources required for the work

1.6. Prepare vehicle to be worked on for the test

1.7. Coordinate activities with others at the site prior to commencement of, and during, the work activity

2. Test vehicles and equipment

2.1. Carry out pre-start, start-up, shut-down and isolation procedures

2.2. Test operational functions of the vehicle

2.3. Move/relocate vehicle for testing purposes

2.4. Identify and rectify faults where possible, or arrange for corrective action

2.5. Act on or report monitoring systems warnings and alarms

2.6. Recognise and respond to hazardous and emergency situations

3. Complete the testing sequence

3.1. Clean, maintain and store equipment and tools

3.2. Restore worksite

3.3. Complete records and documents

Required skills

Specific skills are required to achieve the performance criteria in this unit, particularly for the application in the various circumstances in which this unit may be applied. This includes the ability to carry out the following as required to test operational functions of vehicles and equipment:

apply legislative, organisation and site requirements and procedures

access, interpret and apply technical information and drawings

apply site safety procedures

use hand and power tools

carry out precision measurement

access and use site inventory system

identify and diagnose faults

operate vehicles/equipment for test purposes

interpret test results

Required knowledge

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly its application in a variety of circumstances in which the unit may be used. This includes knowledge of the following, as required to test operational functions of vehicles and equipment:

occupational health and safety requirements

mine operational rules and procedures

operations, characteristics, capabilities and limitations of mine vehicles and equipment

diagnosis and fault finding techniques

site equipment and maintenance documentation and procedures

site inventory (parts) systems

testing procedures

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

knowledge of the requirements, procedures and instructions for testing the operational functions of vehicles and equipment

implementation of requirements, procedures and techniques for the safe, effective and efficient testing of the operational functions of vehicles and equipment

working with others to test the operational functions of vehicles and equipment that meets all of the required outcomes

consistent timely completion of testing of operational functions of vehicles and equipment that safely, effectively and efficiently meets the required outcomes

Context of and specific resources for assessment

This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.

The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.

Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.

Aboriginal people and other people from a non English speaking background may have second language issues.

Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances.

Where applicable, physical resources should include equipment modified for people with disabilities.

Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

written and/or oral assessment of the candidate's required knowledge

observed, documented and/or first hand testimonial evidence of the candidate's:

implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes

consistently achieving the required outcomes

first hand testimonial evidence of the candidate's:

working with others to test the operational functions of vehicles and equipment

Guidance information for assessment

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant compliance documentation

may include:

legislative, organisation and site requirements and procedures

manufacturer's guidelines and specifications

Australian standards

code of practice

Employment and workplace relations legislation

Equal Employment Opportunity and Disability Discrimination legislation

Testing requirements may be identified through:

work orders or requests

condition statements

maintenance schedules

initial diagnosis

manufacturer specifications

Resources may include:

appropriate technical manuals

information materials

tools

Preparing vehicles may include:

locating

positioning

isolating

cleaning

checking for and removing hazardous materials/explosives

Vehicles may include

all machines involved in production/support roles at the mine site

Testing operational functions may include:

steering

brakes

lights

exhaust emissions

pneumatics

hydraulics

raw gas sampling

production functionality in production mode

movement

warning devices

gas monitoring devices

Equipment may include, but is not limited to:

gas sampling equipment

hydraulic and pneumatic testing equipment