SIFBCR005B
Install burial vaults

This unit describes the performance outcomes, skills and knowledge required to install below ground concrete burial vaults.

Application

This unit applies to cemetery and crematorium staff involved in burial works, and involves working under supervision as part of a team with some responsibility.


Prerequisites

SIFOHS007A Identifyhazardsandassess risks in a cemetery or crematorium


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1

Prepare to lay vaults.

1.1

Liaise with appropriate staff to identify and confirm work requirements.

1.2

Identify, prepare and use personal protective equipment according to workplace policies and procedures, and relevant legislation.

1.3

Select and assemble tools and equipment according to work requirements.

1.4

Check tools and equipment for serviceability and report faults according to workplace policies and procedures, and relevant legislation.

1.5

Identify safety hazards and take corrective action according to workplace policies and procedures, and relevant legislation.

1.6

Install drainage provisions in excavated vault areas according to plan details, workplace policies and procedures, and relevant legislation.

1.7

Install formwork in site according to workplace policies and procedures, and relevant legislation.

1.8

Install sub-base material in site and compact area to specified level and consistency.

1.9

Install waterproof membrane to area as required and according to manufacturer instructions and workplace policies and procedures.

1.10

Cut, place and tie reinforcement to area according to plan details and relevant legislation.

1.11

Apply release agent to formwork according to manufacturer specifications and relevant legislation.

2

Mix concrete.

2.1

Calculate volume of concrete required for vaults according to work requirements.

2.2

Determine proportions for concrete mix according to vault strength requirements.

2.3

Determine volume of dry materials to produce final concrete mix and mix to blend all materials.

2.4

Introduce sufficient water to produce a plastic concrete mix after making allowances for damp aggregates.

3

Place and finish concrete.

3.1

Check faults and take required corrective action prior to placing concrete.

3.2

Apply release agent to formwork according to manufacturer instructions.

3.3

Conduct concrete slump test to confirm specifications where required.

3.4

Place concrete to designated levels in a manner that avoids segregation of materials.

3.5

Consolidate concrete using approved vibration method according to workplace policies and procedures.

3.6

Screed concrete according to required level.

3.7

Prepare surface to required finish.

3.8

Use appropriate curing agent and method according to manufacturer instructions.

3.9

Clean equipment on completion according to workplace policies and procedures, and relevant legislation.

4

Complete installation.

4.1

Remove formwork and nails according to workplace policies and procedures, and relevant legislation.

4.2

Gather and place vault lids according to requirements.

4.3

Clean work area and store all equipment according to workplace policies and procedures, and relevant legislation.

Required Skills

Required skills

safe concrete construction and installation techniques, including appropriate use of personal protective equipment

communication skills, including clear and direct communication to establish and confirm work requirements and to report equipment faults or defects

literacy and numeracy skills to identify and interpret work requirements, interpret plans and drawings, and calculate materials

organisational and self-management skills to complete required tasks according to work requirements and workplace policies and procedures.

Required knowledge

concrete construction

materials relating to concreting process

material handling techniques

broad working knowledge of relevant federal, state or territory, and local government legislation and regulations relating to OHS and vault installation

environmental impacts in relation to installing burial vaults and minimal impact practices to reduce these

correct and environmentally sound disposal methods for all types of waste and to particular for hazardous substances

workplace policies and procedures regarding concrete construction

operating and maintenance requirements of relevant hand tools and equipment.

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

ability to select, prepare, use, maintain and clean the required tools and equipment according to supervisor instructions, workplace policies and procedures, and manufacturer's instructions

ability to calculate volume and proportion of concrete mix and dry materials, and mix, test and place concrete

the safe and efficient installation of burial vaults according to work specifications

installing burial vaults on multiple occasions to ensure consistency of performance and ability to respond to different situations.

Context of and specific resources for assessment

Assessment must ensure:

demonstration of skills in excavated vault areas

access to personal protective equipment and concreting tools and equipment

access to relevant documentation, such as job specifications and plans.

Methods of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

observation of candidate completing appropriate planning and preparation for work, placing concrete and completing installation according to work plans, workplace policies and procedures, and relevant legislation

written or verbal questioning to assess knowledge and understanding of relevant legislation and workplace policies and procedures with regard to performing vault installation

review of portfolios of evidence and third-party workplace reports of on-the-job performance by the candidate.

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

SIFBCR007A Prepare vaults or crypts for burials.

Employability skills embedded in this unit should be assessed holistically with other relevant units that make up the skill set or qualification and in the context of the job role.


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Appropriate staff may include:

co-worker

supervisor

manager.

Work requirements may include:

tools and equipment

materials

drainage provisions

vault strength requirements.

Personal protective equipment may include:

overalls

steel-capped boots

jacket

long sleeves

gloves

safety glasses or goggles

hat or cap

gumboots

ear plugs or muffs

sun protection

two-way radio.

Workplace policies and procedures may include:

standard operating policies and procedures

standards and certification requirements

quality assurance procedures

OHS procedures, such as:

use of personal protective equipment

manual handling procedures

use of tools and equipment

emergency procedures, including fire and accident procedures.

workplace practices in regard to environmental considerations.

Relevant legislation may include:

OHS

material handling, including hazardous materials

cemetery Acts and by-laws

Australian standards

Worksafe Australia certification and standards.

Environmental Protection Act.

Safety hazards may relate to:

air

vibration

water

heat

overhead obstacles

loadings on top of ground, such as:

machinery

people

soil

previously dug graves

monument collapse

drains

cables

sprinklers

pipes

trees and roots.

Corrective action may include:

reporting to manager or supervisor.

Faults may include:

formwork stability

reinforcement placement

screeding point positions.


Sectors

Sector

Funeral Services


Competency Field

Burials and Cremations


Employability Skills

This unit contains employability skills.


Licensing Information

Not applicable.