Application
This unit applies to those working as canyoning guides or assistant guides required to establish belays for canyoning activities in a range of controlled single pitch locations with a variety of terrain obstacles, hazards and environmental conditions.
This unit also applies to outdoor recreation leaders working for outdoor education or adventure providers; volunteer groups; not-for-profit organisations or government agencies.
Prerequisites
Nil
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes of a unit of competency. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
1. Select equipment for belay system. | 1.1. Select a belay system that minimises environmental impact according to contextual issues. 1.2. Identify and select equipment according to relevant legislation and organisational policies and procedures. 1.3. Select anchors that meet the requirements of the abseil and abilities of the participants. 1.4. Assess condition of the anchors, including performance under likely load, and stability of surroundings. 1.5. Choose a belay device that is suitable to the surface conditions and belayer's ability. 1.6. Complete all necessary equipment safety checks according to organisational policies and procedures. |
2. Set up belay system. | 2.1. Rig multiple anchors, ensuring equalisation and minimal shock loading. 2.2. Tie knots and rig ropes suitable for the type of belay system established. 2.3. Establish a belay from which the belayer is able to escape and safely perform a rescue. 2.4. Establish a belay that maintains safety of belayer and minimises movement of the belayer in the event of a fall. 2.5. Avoid or remove belay hazards to maintain safety of belayer. 2.6. Determine the need for, and establish back up belay systems. |
3. Rig rope pitches. | 3.1. Identify safe access to and egress from the site according to relevant legislation. 3.2. Determine ascent and or descent route according to contextual issues. 3.3. Tie knots that are suitable for the type of system established and for potential retrieval or rescue situations. 3.4. Set up anchors and ropes to facilitate rescue. |
Required Skills
Required skills |
problem-solving skills to: minimise and or eliminate hazards select anchors and belay systems for the context and conditions of canyoning activity rope handling and knot tying skills to rig ropes and anchors first aid and emergency response skills appropriate to the location to enable initial response to emergencies and personal health care. |
Required knowledge |
legislation and organisational policies and procedures to enable safe conduct and legal access of all belaying activities conducted in a canyon minimal impact canyoning codes to ensure protection of the environment equipment types, characteristics and technology used to establish belays for abseiling in canyons care and maintenance of equipment to ensure prolonged life span and safety requirements, as advised by the manufacturer's recommendations for equipment use belay and anchor systems appropriate for single pitch natural surfaces technical abseiling and equipment knowledge to establish top and bottom belays types of knots, their advantages and disadvantages, and their impact on roping activities emergency procedures, potential hazards and obstacles relevant to the location to ensure safety of self and others. |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the following is essential: selects equipment and conducts safety checks to ensure effective working order differentiates between the types of belay systems, anchors and knots and their suitability to different rigging situations determines the need for, and establishes, back up belay systems to ensure safety of self and other participants. |
Context of and specific resources for assessment | Assessment must ensure establishment of multiple belays to demonstrate competency and consistency of performance. Assessment must also ensure access to: a suitable canyoning location with a vertical single pitch and simple obstacles and features that allow participant to demonstrate belay rigging skills equipment required for the establishment of belays. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: observation of selecting equipment according to contextual issues oral or written questioning to assess knowledge of relevant legislation and organisational policies and procedures to ensure safe use of all equipment observation of safe participation and demonstration of setting up belay systems suitable to different contexts observation of dealing with contingencies, such as equipment failure third-party reports from a supervisor detailing performance. Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: SISOCAY302A Apply vertical canyoning skills SISOVTR301A Perform vertical rescues. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Belay system may include: | top of a pitch bottom of the pitch self belay. |
Environmental impact may include: | rock dislodgement compacting of soil effect on other users of the site damage to flora, fauna, and the environment. |
Contextual issues may include: | weather conditions, including times season transport location trip distance and duration group objectives group size. |
Equipment may include: | ropes tape slings karabiners rope protectors belay devices descending devices specific canyoning equipment. |
Relevant legislation may include: | occupational health and safety permits or permission for access environmental regulations. |
Organisational policies and procedures may include: | occupational health and safety emergency procedures communication protocols use and maintenance of equipment code of ethics. |
Anchors may include: | natural fixed. |
Participants may include: | experienced inexperienced adults children. |
Condition of the anchors may include: | age location wear decay corrosion environmental stress insect damage. |
Likely load may include: | group size set up type of abseil conducted abseiler ability possible forces generated during a fall. |
Belay device may include: | plate devices auto-locking devices tubular devices Prusik cord and suitable friction hitch. |
Safety checks may include: | A - anchors - secure and suitable to application B - buckles - locked as per manufacturers recommendations C - connectors - locked secured and oriented D - devices - threaded correctly and secured E - everything else including end or rope knots, friction, friction hitches, belayer ready, helmet chin strap, clothing, jewellery and hair secured F - friend - cross check. |
Knots may include: | end-of-rope knots mid-rope knots rope joining knots tape knots. |
Hazards may include: | temperature extremes slippery or unstable terrain dangerous animals and insects stinging trees and nettles dense vegetation group management hazards. |
Safety of belayer may include: | attachment to anchor or alternate safety system positioning out of direct line of rock or equipment fall. |
Sectors
Outdoor Recreation
Employability Skills
This unit contains employability skills.
Licensing Information
No licensing, regulatory or certification requirements apply to this unit at the time of endorsement.