Application
Not applicable.
Prerequisites
Not applicable.
Elements and Performance Criteria
Element | Performance criteria |
1. Prepare the turbine for operation | 1.1 Pre-operational checks are conducted 1.2 Health and safety hazards / maintenance requirements are identified and reported to appropriate personnel according to workplace reporting procedures |
2. Start and monitor turbine operation | 2.1 The turbine is started and brought on line safely according to workplace procedures and manufacturer's recommendations 2.2 Plant is operated within limits of manufacturer's specifications to meet workplace requirements 2.3 Equipment is monitored to confirm operating condition 2.4 The workplace meets housekeeping standards |
3. Analyse and respond to abnormal performance | 3.1 Operating data and plant operating conditions are analysed to identify causes of abnormal performance 3.2 Corrective action is taken in accordance with workplace procedures in response to Hazards and abnormal plant performance 3.3 Emergency procedures are implemented as required according to workplace procedures and manufacturer's recommendations |
4. Handover turbine operations | 4.1 Workplace records are maintained in accordance with statutory requirements and workplace procedures 4.2 Handover is carried out according to workplace procedure 4.3 Turbine operators are aware of turbine status and related equipment at completion of handover |
5. Shutdown the turbine | 5.1 The turbine is operationally shut down according to workplace procedures and manufacturer's recommendations 5.2 Valves and fittings are removed in preparation for maintenance as required 5.3 The turbine is stored in shut down mode 5.4 Maintenance requirements are identified and reported according to workplace reporting procedure |
Required Skills
Not applicable.
Evidence Required
The assessment process must address all of the following items of evidence.
Ability to:
1. Access workplace information on operating requirements
2. Select, fit and use personal protective clothing and/or equipment
3. Handle chemicals safely. This includes following correct handling and storage procedures and use of appropriate protective clothing and equipment
4. Identify and report hazards and potential hazards in the work area
5. Confirm status of turbine and related services including availability of steam
6. Conduct pre-start checks. This typically include checking:
cooling water supply
overspeed trip
emergency stop
operation and position of valves, fittings, steam traps and steam line purge systems
lubrication system
drainage system
steam quality and pressure
heat input
free rotation of turbine
reticulation line pressure and system warm up
7. Liaise with other work areas to advise of turbine status
8. Demonstrate set up and start up procedures in both manual and automatic modes and for both a hot start and cold start
9. Monitor turbine operation. This typically includes monitoring:
bearing temperature
pressures
speeds
glands
water filters
oil levels
equipment condition including noise and vibration
steam reticulation line pressure
lubrication system
condenser operation (where fitted)
10. Take corrective action in response to abnormal or unacceptable performance
11. Report and/or record corrective action as required
12. Demonstrate shift handover procedure and confirm that replacement operators are aware of equipment status and operating requirements prior to completing handover
13. Demonstrate procedure to take turbine off line
14. Demonstrate procedure to prepare the turbine for a prolonged shut down. This includes removal of valves and fittings
15. Demonstrate emergency trip procedure and related re-start
16. Record operating information
17. Maintain work area to meet housekeeping standards
May include ability to:
18. Use process control systems
Knowledge of:
19. Relevant state OHS legislation, standards and codes of practice relating to work responsibilities
20. Safety features of the turbines. These include relief and over-speed trip valves
21. Safe work procedures including awareness of health and safety hazards related to turbine operation and associated control measures. Hazards typically include handling chemicals, working around hot surfaces, working around moving equipment, manual handling, fuel and steam leaks.
22. Hierarchy of hazard control measures
23. Duty of care of the turbine operator
24. Purpose and limitations of protective clothing and equipment
25. Purpose and basic principles of turbines. This includes properties of steam
26. Turbine system layout and steam cycle
27. Relationship to other processes. This includes suppliers and users of steam across the site
28. The effect of steam quality on turbine operation
29. The effect of low steam pressure on turbine operation
30. Methods used to render equipment safe to inspect, maintain and/or clean including lock-out, tag-out and isolation procedures
31. Equipment purpose and basic operating principles of turbine and related equipment
32. Operating requirements and parameters
33. Procedures for responding to emergency situations. This includes safe operational shutdown procedure
34. Handover and long term shut down and storage procedures
35. Environmental issues and controls
36. Housekeeping standards for the work area
37. Reporting and recording systems. This includes both statutory and workplace requirements
May include knowledge of:
38. Basic operating principles of process control where relevant. This includes the relationship between control panels and systems and the physical equipment
Relationship with other standards
Pre-requisite units
There are no pre-requisite units for this competency standard.
Co-assessment of related units
Other units of competency relevant to the work role should be assessed in conjunction with this unit. This may include:
SUGZPCI2A Operate a process control interface
Resources required for assessment
Assessment must occur in a real or simulated workplace where the assessee has access to:
Turbine and related equipment
Relevant codes and standards
Operating procedures and related advice on equipment operation
Personal protective clothing and equipment
Communication systems and equipment
Housekeeping standards and procedures
Workplace information recording systems, requirements and procedures
Assessment requirements
For assessment advice where the turbine operation is not a certified occupation, refer to the Assessment Guidelines for this Training Package. Where turbine operation is a certificated occupation, refer to the appropriate NOHSC competency standards, available from National Occupational Health and Safety Commission.
Range Statement
The range statement indicates the context for demonstrating competence. This statement is a guide and unless otherwise indicated, items may or may not apply as required by the work context.
Work is carried out in accordance with company policies and procedures, licensing requirements, manufacturer's recommendations, legislative requirements, codes of practice and industrial awards and agreements. Codes of practice include the Sugar Milling Operations Industry Code of Practice
Workplace information can include Standard Operating Procedures (SOPs) and manufacturer's specifications
Confirming equipment status involves conducting relevant pre-start checks, confirming that cleaning standards are met, all safety guards and manholes are in place and equipment is operational
Turbines and related equipment may include turbines and pass-out turbines, condensers, oil coolers, vacuum pumps and filters
Operation and monitoring of equipment and processes typically requires the use of control panels and systems
Services may include steam, water, mill and instrumentation air and power
Tests may include trip tests
Work may require the ability to work within a team environment
Information systems may be print or instrumentation based
Sectors
Not applicable.
Employability Skills
Not applicable.
Licensing Information
Not applicable.