Not applicable.
Not applicable.
Element | Performance criteria |
1. Prepare for milling operations | 1.1 Milling requirements are identified 1.2 Materials are collected 1.3 Milling equipment is set up for operation 1.4 Pre-operational equipment checks are conducted 1.5 Health and safety hazards / maintenance requirements are identified and reported to appropriate personnel according to workplace reporting procedures |
2. Operate milling equipment to achieve specifications | 2.1 Machining parameters are set to meet job requirements 2.2 Materials are accurately positioned for milling opertation 2.3 Milling equipment is started, operated and shut down according to operating procedures and manufacturer's specification 2.4 Work is checked against specification 2.5 Non-conforming components are identified and corrected as required 2.6 Basic routine maintenance is carried out as required 2.7 The workplace meets housekeeping standards |
Not applicable.
The assessment process must address all of the following items of evidence.
Ability to:
1. Identify milling requirements. This may require interpretation of technical drawings or sketches
2. Select, fit and use personal protective clothing and/or equipment
3. Confirm status of equipment, that safety guards are in place, equipment is fit for operation and required services are available
4. Collect and position materials according to job and equipment requirements
5. Set up, operate and shut down equipment according to workplace procedures to meet job specification
6. Monitor and adjust process and equipment during operation to stay within specification
7. Confirm that components meet specification. This may involve the use of measuring instruments
8. Maintain work area to meet housekeeping standards
May include ability to:
9. Use process control systems
Knowledge of:
10. Relevant state OHS legislation, standards and codes of practice relating to work responsibilities
11. Relevant site operating procedures and practices
12. Purpose and basic operating principles of milling equipment and accessories. This includes awareness of equipment operating capacities
13. Care, maintenance and storage of tool parts and accessories
14. Scope to adjust machining parameters and related effect on outcome
15. The impact of machining parameters and materials used on tool life
16. Safe work procedures including awareness of health and safety hazards related to the operation of the mill and related equipment
17. Housekeeping standards for the work area
May include knowledge of:
18. Basic operating principles of process control where relevant. This includes the relationship between control panels and the physical equipment
Relationship with other standards
Pre-requisite units
The pre-requisites for this competency standard are:
BCG1004A Carry out measurements and calculations
BCC1005A Use hand and power tools
Co-assessment of related units
Other units of competency relevant to the work role should be assessed in conjunction with this unit. This may include:
SUGZPCI2A Operate a process control interface
Resources required for assessment
Assessment must occur in a real or simulated workplace where the assessee has access to:
Mill and equipment
Relevant measuring instrumentation
Materials to be milled
Drawings, templates and specifications as required
Operating procedures and related advice on equipment/instrumentation operation
Personal protective clothing and equipment
Housekeeping standards and procedures
Assessment requirements
For information on how to assess this competency standard and who can assess, refer to the Assessment Guidelines for this Training Package.
The range statement indicates the context for demonstrating competence. This statement is a guide and unless otherwise indicated, items may or may not apply as required by the work context.
Work is carried out in accordance with company policies and procedures, manufacturer's recommendations, legislative requirements, codes of practice and industrial awards and agreements. Codes of practice include the Sugar Milling Operations Industry Code of Practice.
Work is undertaken to predetermined specifications
Mills are not CNC (Computer Numerical Control)
Typical operations include slotting and cutting flats
Machining parameters are typically given and include speeds, feeds, stops, coolant and cutting lubricants
Measuring instrumentation may include callipers, verniers, micrometers, dividers and rulers
Pre-operational checks may include confirming that safety guards are in place, equipment is operational and other pre-start checks as required by workplace procedure
Basic routine maintenance includes cleaning and lubrication
Work may require the ability to work within a team environment
Not applicable.
Not applicable.
Not applicable.