SUGSPPS2A
Perform general planing and shaping operations

This is a Specialist unit. It covers the skills and knowledge required to carry out general planing and shaping operations. It achieves part of the outcomes of MEM 7.5AA Perform general machining. A person who has achieved competence in this MEM unit is recognised as competent in this sugar milling unit.

Application

Not applicable.


Prerequisites

Not applicable.


Elements and Performance Criteria

Element

Performance criteria

1. Prepare for planing and shaping operations

1.1 Machining requirements are identified

1.2 Materials to be planed and/or shaped are collected

1.3 Planing and shaping equipment is set up for operation

1.4 Pre-operational equipment checks are conducted

1.5 Health and safety hazards / maintenance requirements are identified and reported to appropriate personnel according to workplace reporting procedures

2. Operate planing and shaping equipment to achieve specifications

2.1 Machining parameters are set to meet job requirements

2.2 Materials are accurately positioned for planing and shaping operation

2.3 Planing and shaping equipment is started, operated and shut down according to operating procedures and manufacturer's specification

2.4 Work is checked against specification

2.5 Non-conforming components are identified and corrected as required

2.6 Basic routine maintenance is carried out as required

2.7 The workplace meets housekeeping standards

Required Skills

Not applicable.

Evidence Required

The assessment process must address all of the following items of evidence.

Ability to:

1. Identify planing and shaping requirements. This may require interpretation of technical drawings or sketches

2. Select, fit and use personal protective clothing and/or equipment

3. Confirm status of equipment, that safety guards are in place, equipment is fit for operation and required services are available

4. Collect and position materials according to job and equipment requirements

5. Set up, operate and shut down equipment according to workplace procedures to meet job specification

6. Monitor and adjust process and equipment during operation to stay within specification

7. Confirm that components meet specification. This may involve the use of measuring instruments

8. Maintain work area to meet housekeeping standards

Knowledge of:

9. Relevant state OHS legislation, standards and codes of practice relating to work responsibilities

10. Relevant site operating procedures and practices

11. Purpose and basic operating principles of planing and shaping equipment and accessories. This includes awareness of equipment operating capacities

12. Care, maintenance and storage of tool parts and accessories

13. Scope to adjust machining parameters and related effect on outcome

14. The impact of machining parameters and materials used on tool life

15. Safe work procedures including awareness of health and safety hazards related to the operation of the planing and shaping equipment

16. Housekeeping standards for the work area

May include knowledge of:

17. Basic operating principles of process control where relevant. This includes the relationship between control panels and the physical equipment

Relationship with other standards

Pre-requisite units

The pre-requisites for this competency standard are:

BCG1004A Carry out measurements and calculations

BCC1005A Use hand and power tools

Co-assessment of related units

Other units of competency relevant to the work role should be assessed in conjunction with this unit. This may include:

SUGZPCI2A Operate a process control interface

Resources required for assessment

Assessment must occur in a real or simulated workplace where the assessee has access to:

Planing and shaping equipment

Relevant measuring instrumentation

Materials for planing and/or shaping

Drawings, templates and specifications as required

Operating procedures and related advice on equipment/instrumentation operation

Personal protective clothing and equipment

Housekeeping standards and procedures

Assessment requirements

For information on how to assess this competency standard and who can assess, refer to the Assessment Guidelines for this Training Package.


Range Statement

The range statement indicates the context for demonstrating competence. This statement is a guide and unless otherwise indicated, items may or may not apply as required by the work context.

Work is carried out in accordance with company policies and procedures, manufacturer's recommendations, legislative requirements, codes of practice and industrial awards and agreements. Codes of practice include the Sugar Milling Operations Industry Code of Practice.

Work is undertaken to predetermined specifications

Planes and shapers are not CNC (Computer Numerical Control) machines

Typical operations include slotting, planing and cutting flats

Machining parameters are typically given and include speeds, feeds, stops, coolant and cutting lubricants

Measuring instrumentation may include dividers, callipers, verniers, micrometers and rulers

Pre-operational checks may include confirming that safety guards are in place, equipment is operational and other pre-start checks as required by workplace procedure

Basic routine maintenance includes cleaning and lubrication

Work may require the ability to work within a team environment


Sectors

Not applicable.


Employability Skills

Not applicable.


Licensing Information

Not applicable.