- TDMMR4307B - ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES
TDMMR4307B
ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES
Application
The unit has application in the qualification for an Integrated Rating, i.e. Certificate III in Transport&Distribution(Maritime Operations - Integrated Rating). |
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA | |||
1 | Carry out mooringand anchor handling tasks | a | Tasks required of an integrated rating in preparation for arrival and departure from an anchorage or mooring are completed in accordance with shipboard procedures | |
b | Mooring line handling, stoppering and heaving line tasks are performed in accordance with shipboard procedures | |||
c | Mooring and unmooring operations are carried out as per established procedures | |||
d | Anchor operations are carried out in accordance with shipboard procedures | |||
e | Vessel is secured to a sea buoy in accordance with shipboard procedures | |||
f | A tug is secured using tug's or vessel's lines as per shipboard procedures | |||
g | Communications during mooring and anchor handling operations are clear and timely and involve the correct use of communications equipment where required | |||
2 | Follow safetyand hazard control procedures | a | All required safety precautions and regulations are followed when carrying out routine mooring and anchor handling tasks | |
b | Operational hazards are identified and action is taken in conjunction with the officers, engineers and other team members to minimise or eliminate risk to personnel, vessel and the environment |
ELEMENT | PERFORMANCE CRITERIA | ||
2 | Follow safetyand hazard control procedures (continued) | c | Shipboard emergency and contingency plans are followed in the event of a failure or emergency associated with mooring and anchor handling equipment and machinery and associated systems |
Required Skills
REQUIRED KNOWLEDGE | ||
This describes the knowledge required for this unit. | ||
1 | Applicable sections of relevant maritime regulations | |
2 | Relevant OH&S and pollution control legislation and policies | |
3 | Mooring and anchor handling procedures on board a vessel | |
4 | Functions and responsibilities of the members of the bridge and engine room teams on board a vessel | |
5 | Procedures for carrying out the routine tasks required of an integrated rating when a vessel is arriving at or departing from a berth or anchorage | |
6 | Types, features and characteristics of fibre and wire ropes | |
7 | Hazards and related safety precautions when carrying out mooring and anchor handling activities | |
8 | Signs of fatigue | |
9 | Fatigue management principles and techniques | |
10 | Communication techniques and equipment used during mooring and anchor handling operations | |
REQUIRED SKILLS | ||
This describes the basic skills required for this unit. | ||
1 | Use basic verbal and other communication skills required when assisting in mooring and anchor handling activities | |
2 | Read, interpret and apply basic instructions and standard operating procedures relevant to mooring and anchor handling activities | |
3 | Work safely and collaboratively with others when assisting in mooring and anchor handling activities | |
4 | Select and safely use tools and equipment as per operating instructions | |
5 | Recognise problems that may occur during mooring and anchor handling activities and take appropriate action | |
6 | Store lines, tools and equipment after use as per standard operating procedures | |
7 | Adapt to differences in vessels, port facilities, equipment and standard operating procedures | |
8 | Follow required work schedule as per company requirements |
Evidence Required
TDMMR4307B ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES | ||||||
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, | ||||||
1 | Critical aspects of evidence required to demonstrate competency in this unit | Assessment must confirm appropriate knowledge and skills to: | ||||
a | Carry out mooring and anchor handling tasks | |||||
b | Ensure the exercise of all required safety, environmental and hazard control precautions and procedures during mooring and anchor handling activities | |||||
c | Communicate effectively with others during mooring and anchor handling activities | |||||
2 | Evidence required for demonstration of consistent performance | a | Performance is demonstrated consistently over a period of time and in a suitable range of contexts | |||
b | Consistently applies underpinning knowledge and skills when: | |||||
1 | carrying out mooring and anchor handling tasks | |||||
2 | exercising all required safety, environmental and hazard control precautions and procedures during mooring and anchor handling tasks | |||||
3 | communicating effectively with others during routine shipboard tasks | |||||
c | Shows evidence of application of relevant workplace procedures, including: | |||||
1 | ISM Code and associated vessel's safety management system and procedures | |||||
2 | OH&S regulations and hazard prevention policies and procedures | |||||
3 | job procedures and work instructions related to mooring and anchor handling activities | |||||
4 | following housekeeping processes | |||||
d | Action is taken promptly to report operational incidents and problems in accordance with regulations and shipboard procedures | |||||
e | Work is completed systematically with required attention to detail | |||||
f | Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions between crew and others | |||||
3 | Context of assessment | a | Assessment of competency must comply with the assessment requirements of the relevant maritime regulations | |||
b | Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation: |
TDMMR4307B ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES | |||||||
3 | Context of assessment (continued) | 1 | As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and | ||||
2 | Appropriate practical assessment must occur: | ||||||
i | at the registered training organisation; and/or | ||||||
ii | on an appropriate working or training vessel | ||||||
4 | Specificresourcesrequired for assessment | Access is required to opportunities to: | |||||
a | demonstrate the ability to carry out mooring and anchor handling procedures through appropriate case studies, practical exercises and simulated situations; and/or | ||||||
b | carry out mooring and anchor handling procedures on an operational commercial or training vessel |
Range Statement
TDMMR4307B ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES | ||||||||
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. | ||||||||
VARIABLE | SCOPE | |||||||
1. GENERAL CONTEXT | ||||||||
a. | Work must be carried out: | 1 | in compliance with relevant maritime regulatory requirements | |||||
b. | Work is performed: | 1 | as a member of an anchoring or mooring party under defined operational requirements, with some accountability and responsibility for self and others in achieving the prescribed outcomes | |||||
c. | Work involves: | 1 | the application of basic mooring and anchor handling procedures across a variety of operational contexts | |||||
d. | Work requires: | 1 | the following of orders and instructions of the officer on watch | |||||
2. WORKSITE ENVIRONMENT | ||||||||
a | Vessel may include: | 1 | any Australian or international commercial vessel | |||||
b | Mooring operations include: | 1 | throwing heaving lines | |||||
2 | running out mooring lines | |||||||
3 | reporting distance off | |||||||
4 | securing mooring lines | |||||||
5 | letting go mooring lines | |||||||
6 | recovering mooring lines | |||||||
7 | making fast fore and aft to a fixed terminal or jetty | |||||||
8 | making fast to a single point mooring | |||||||
9 | making fast to a conventional buoy mooring | |||||||
10 | preparing mooring area for operations | |||||||
11 | making fast and letting go tugs |
TDMMR4307B ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES | ||||||||
VARIABLE | SCOPE | |||||||
b | Mooring operations include: (continued) | 12 | adjusting moorings during a port stay | |||||
13 | securing mooring area on departure | |||||||
14 | rigging gangways, accommodation ladders and pilot ladders | |||||||
15 | stowing mooring lines after use | |||||||
c | Mooring equipment includes: | 1 | man-made fibre and wire-rope moorings | |||||
2 | heaving lines and stoppers (rope and chain) | |||||||
3 | tension winches | |||||||
4 | stand clone winches | |||||||
5 | electric, hydraulic and hand driven capstans/drum ends | |||||||
6 | dead men and fairheads | |||||||
d | Equipment malfunctions or problems may include: | 1 | failure of moorings or equipment | |||||
2 | damage to moorings | |||||||
3 | insufficiency of moorings | |||||||
4 | poor leads | |||||||
5 | inability to maintain vessel in position | |||||||
e | Routine and emergency anchor operations may include: | 1 | dropping, paying out and holding an anchor | |||||
2 | reporting amount and lie of cable | |||||||
3 | letting go and weighing anchor | |||||||
4 | securing to a single anchor | |||||||
5 | securing to twin anchors | |||||||
6 | recovering anchor | |||||||
7 | clearing anchor and cable | |||||||
8 | recovering a foul hawse | |||||||
9 | hanging off an anchor |
TDMMR4307B ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES | ||||||
VARIABLE | SCOPE | |||||
f | Anchor equipment may include: | 1 | cable | |||
2 | securing arrangements | |||||
3 | anchor balls | |||||
4 | cable locker | |||||
g | Operational hazards during mooring or anchor handling operations may include: | 1 | failure of moorings, anchor or equipment | |||
2 | damage to moorings | |||||
3 | insufficiency of moorings | |||||
4 | faulty or damaged machinery and equipment | |||||
5 | moving and rotating machinery | |||||
6 | using equipment beyond safe working limits | |||||
7 | cables and ropes | |||||
8 | poor leads | |||||
9 | inability to maintain vessel in position | |||||
10 | moving heavy loads using unsafe lifting procedures | |||||
11 | slippery deck | |||||
12 | poor housekeeping procedures | |||||
13 | non-compliance with safe working procedures | |||||
h | Documentation and recordsmay include: | 1 | ISM Code safety management system plans, procedures, checklists and instructions | |||
2 | IMO STCW 95 Convention and Code | |||||
3 | AMSA Marine Orders | |||||
4 | orders and instructions of the officer on watch | |||||
5 | vessel and company procedures | |||||
6 | instructions of relevant maritime authorities | |||||
7 | relevant Australian and international standards |
TDMMR4307B ASSIST IN MOORING AND ANCHOR HANDLING ACTIVITIES | |||||
VARIABLE | SCOPE | ||||
i | Applicable legislation, regulations and codes may include: | 1 | relevant sections of IMO STCW 95 Convention and Code | ||
2 | relevant sections of AMSA Marine Orders | ||||
3 | ISM Code | ||||
4 | relevant international, Commonwealth, State and Territory OH&S legislation |
Sectors
Not applicable.
Employability Skills
Not applicable.
Licensing Information
Licensing/legislative requirements | The unit is consistent with the relevant sections of STCW 95 and Marine Orders under the Australian Navigation Act 1912, describing the specific requirements for Integrated Ratings. |