Elements and Performance Criteria

Element

Performance Criteria

1

Drive the medium rigid vehicle

1.1

The medium rigid vehicle is started, steered, manoeuvred, positioned and stopped in accordance with traffic regulations and manufacturers instructions

1.2

Engine power is managed to ensure efficiency and performance and to minimise engine and transmission damage

1.3

Engine operation is maintained within the manufacturer's specified torque range and temperature through effective transmission use

1.4

Braking system of medium rigid vehicle is managed and operated to ensure effective control of the vehicle under all conditions

1.5

Driving hazards are identified and/or anticipated and avoided or controlled through defensive driving

1.6

The medium rigid vehicle is driven in reverse, maintaining visibility and achieving accurate positioning

1.7

The medium rigid vehicle is parked, shut down and secured in accordance with manufacturers specifications, traffic regulations and workplace procedures

1.8

Appropriate procedures are followed in the event of a driving emergency

2

Monitor traffic and road conditions

2.1

The most efficient route of travel is taken through monitoring and anticipation of traffic flows and conditions, road standards and other factors likely to cause delays or route deviations

2.2

Traffic and road conditions are constantly monitored and acted upon to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities

3

Monitor and maintain vehicle performance

3.1

Vehicle performance is maintained through pre-operational inspections and checks of the vehicle

3.2

Performance and efficiency of vehicle operation is monitored during use

3.3

Defective or irregular performance or malfunctions are reported to the appropriate authority

3.4

Vehicle records are maintained/updated and information is processed in accordance with workplace procedures

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Relevant road rules, regulations, permit and licence requirements of the relevant state/territory road traffic authority

Relevant OH&S and environmental procedures and regulations

Medium rigid vehicle controls, instruments and indicators and their use

Medium rigid vehicle handling procedures

Procedures to be followed in the event of a driving emergency

Engine power management and safe driving strategies

Efficient driving techniques

Workplace driving and operational instructions

Driving hazards and related defensive driving techniques

Pre-operational checks carried out on vehicle and related action

Differences between transmission types

Principles of operation of air brakes and procedures for their use

Principles of stress management when driving a vehicle

Map reading and road navigation techniques including the use of a GPS device where applicable

Factors which may cause traffic delays and diversions and related action that can be taken by a driver

Causes and effects of fatigue on drivers

Factors which increase fatigue-related accidents

Fatigue management strategies including on-road techniques

Lifestyles which promote the effective long-term management of fatigue

Required skills:

Communicate effectively with others when driving a medium rigid vehicle

Read and interpret instructions, procedures, information and signs relevant to work activities

Interpret and follow operational instructions and prioritise work

Complete documentation related to work activities

Operate electronic communication equipment to required protocol

Work collaboratively with others when driving a medium rigid vehicle

Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others

Promptly report and/or rectify any identified problems, faults or malfunctions that may occur when driving a medium rigid vehicle in accordance with regulatory requirements and workplace procedures

Implement contingency plans for unexpected events when driving a medium rigid vehicle

Apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities

Monitor work activities in terms of planned schedule

Modify activities depending on differing operational contingencies, risk situations and environments

Apply fatigue management knowledge and techniques

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Operate and adapt to differences in equipment in accordance with standard operating procedures

Select and use required personal protective equipment conforming to industry and OH&S standards

Monitor performance of equipment

Monitor and anticipate traffic hazards and take appropriate action

Carry out pre-operational checks on a medium rigid vehicle

Check and replenish fluids and carry out lubrication processes in the course of work activities

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises, case studies and other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and/or equipment, and/or

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through appropriately simulated activities at the registered training organisation, and/or

in an appropriate range of situations in the workplace

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Type of vehicle includes:

all medium rigid vehicles, for example any 2-axle rigid vehicle, including truck and bus greater than 8 tonnes GVM

Driving may be carried out in typical road transport situations, including:

operations conducted at day or night

typical weather conditions

on the open road

on a private road

while at a depot, base or warehouse

while at a client's workplace or work site

Vehicle handling procedures may include:

starting a vehicle

steering and manoeuvring a vehicle

accelerating and braking

positioning and stopping a vehicle

reversing a vehicle

operating vehicle controls, instruments and indicators

using air brakes

using defensive driving techniques

managing engine performance

Pre-operational checks may include:

visual check of vehicle

checking and topping up of fluid levels

checks of tyre pressures

checks of operation of vehicle lights and indicators

checks of brakes

Minor routine repairs may include:

replacement of blown globes in vehicle lights

replacement of broken fan belt

replacement of blown fuse

replacement of door mirrors

repairs to rear tail-light lens

changing of tyres

repair of tyre punctures

replacement of broken coolant hose

Driving hazards may include (examples only):

wet and iced roads

oil on road

animals and objects on road

fire in vehicle

leaking fuel

faulty brakes

parked vehicles on the road

faulty steering mechanism on vehicle

pedestrians crossing the road

flooded sections of road

windy sections of road

foggy conditions

Factors that can cause traffic delays and diversions may include:

traffic accidents

flooded sections of road

road damage

bridge/tunnel damage

road works

building construction

emergency situations such as bushfires, building fires, etc.

road closures for special events such as marches, parades, etc.

holiday traffic

road closures for utility works such as electricity, water, sewerage, telecommunications, gas, etc.

Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established procedures

Documentation/records may include:

state/territory medium rigid vehicle driving licence requirements

state/territory road rules

workplace driving instructions and procedures

vehicle manufacturers instructions, specifications and recommended driving procedures including preoperational checks of vehicle

emergency procedures

vehicle log book or record book (where required)

Applicable procedures and codes may include:

relevant state/territory roads and traffic authority driving regulations and licence requirements pertaining to medium rigid vehicles

relevant state/territory road rules

relevant state/territory permit regulations and requirements

relevant state/territory OH&S legislation

relevant state/territory fatigue management regulations

relevant state/territory environmental protection legislation