Operation of the vehicle must be carried out in compliance with vehicle licence requirements and regulations relating to the relevant state/territory and traffic authorities.
Work is performed with limited or no supervision, with accountability and responsibility for self and others in achieving the prescribed outcomes.
Nil
1 | Follow safety requirements | 1.1 | Operator and third party safety is observed in accordance with organisational/manufacturer and legislative requirements |
1.2 | Vehicle controls are checked and operated in accordance with organisational/manufacturer requirements | ||
1.3 | Vehicle cleaning and non-technical maintenance is undertaken in accordance with organisational/manufacturer requirements | ||
1.4 | Safety items are used and stored in accordance with organisational/manufacturer requirements | ||
1.5 | Defective equipment is reported in accordance with organisational/manufacturer requirements | ||
2 | Load product bin onto vehicle | 2.1 | Vehicle is made ready to operate in accordance with organisational/manufacturer requirements. |
2.2 | Product streams to be collected are identified | ||
2.3 | Documentation provided is used to determine locations to collect product | ||
2.4 | Prior to (manual tarping) or after (automated tarping) loading product bin onto vehicle, covering of load is determined | ||
2.5 | Product bin is loaded onto vehicle in accordance with organisational/manufacturer and legislative requirements. | ||
2.6 | Product bin is secured to vehicle in accordance with organisational/manufacturer and legislative requirements | ||
2.7 | Product is removed from ground and no product is left on lifting equipment, vehicle or body | ||
2.8 | Prior to travel, load covers are tied down in accordance with organisational/manufacturer and legislative requirements | ||
3 | Unload product from vehicle and complete relevant documentation | 3.1 | Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading |
3.2 | Vehicle is positioned to allow unloading, in accordance with site, organisational/manufacturer and legislative requirements | ||
3.3 | Load covers (tarps) are removed in accordance with organisational/manufacturer and legislative requirements | ||
3.4 | Unloading equipment is operated in accordance with organisational/manufacturer and legislative requirements | ||
3.5 | Return of equipment used to transit position is ensured | ||
3.6 | Documentation for unloaded product is completed in accordance with organisational/manufacturer and legislative requirements | ||
4 | Unload product bin from vehicle | 4.1 | Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading |
4.2 | Vehicle is positioned to allow unloading, in accordance with site, organisational/manufacturer and legislative requirements | ||
4.3 | Unloading equipment is operated in accordance with organisational/manufacturer and legislative requirements | ||
4.4 | Return of equipment used to transit position is ensured | ||
4.5 | Documentation for unloaded product bin is completed in accordance with organisational/manufacturer and legislative requirements |
This section describes the knowledge and skills required for this unit. |
Required knowledge: |
Efficient driving techniques and eco-driving considerations |
Factors involved in trip preparation |
Factors that may cause traffic delays and diversions |
Relevant dangerous goods (DG) information relating to operating the vehicle |
Relevant state/territory roads and traffic authority road rules, regulations, permits and licence requirements |
Relevant work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations relating to vehicle operations |
Safe pickup and delivery of product to and from site |
Vehicle loading and unloading procedures |
Workplace documentation |
Workplace driving and operational instructions |
Required skills: |
Adapt appropriately to cultural differences in the workplace and customer sites, including modes of behaviour and interaction with others |
Apply fatigue management knowledge and techniques |
Apply precautions and required action to minimise, control or eliminate hazards that may exist when operating the vehicle |
Complete documentation relating to the vehicle |
Identify, load and transport product streams in accordance with organisational/manufacturer and legislative requirements |
Implement contingency plans for unexpected events when operating the vehicle |
Interpret and follow operational instructions and prioritise work |
Manually position product containers/bins |
Modify activities depending on operational contingencies, risk situations and environments |
Monitor and anticipate traffic hazards and take appropriate action |
Monitor performance of vehicle and equipment and take appropriate action where required |
Operate and adapt to differences in equipment in accordance with standard operating procedures. |
Read and interpret instructions, procedures, information and signs relevant to the vehicle |
Select and use required personal protective equipment (PPE), conforming to organisational, industry and WHS/OHS standards |
Work collaboratively with others when operating the vehicle |
Work systematically with required attention to detail, without injury to self or others or damage to infrastructure or equipment |
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package. | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include: applying techniques for loading and unloading of the vehicle applying correct operation of vehicle cabin functions applying correct manual handling techniques when operating vehicle and/or product containers identifying and using the PPE required for the product being loaded/transported applying eco-driving techniques when operating the vehicle ensuring currency of relevant legislative and regulatory knowledge ensuring currency of knowledge of organisational and manufacturer procedures for transporting product in the vehicle ensuring currency of knowledge of customer requirements when picking up product or delivering product to a product collection facility. |
Context of and specific resources for assessment | Performance is demonstrated consistently over time and in a suitable range of contexts. Resources for assessment include access to: workplace where individual or small group work can be conducted tools, equipment and personal protective equipment currently used in industry relevant regulatory and equipment documentation that impacts on work activities range of relevant exercises, case studies and/or other simulated practical and knowledge assessments appropriate range of relevant operational situations in the workplace. In both real (within safe means) and simulated environments, access is required to: relevant and appropriate materials and equipment applicable documentation including workplace procedures, regulations, codes of practice and operations manuals. |
Method of assessment | Practical assessment must occur in: appropriately simulated workplace environment and/or safe and appropriate range of situations in the workplace. A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit: direct observation of the candidate individually or as a part of a small group direct observation of the candidate applying relevant WHS/OHS requirements and work practices. |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. | |
Equipment fitted to the vehicle may include: | emergency information holder emergency shutdown controls eyewash kit fire extinguishers first aid kit spill kit vehicle emergency equipment |
Loading and unloading sites may include: | council sites customer site depot private sites waste, transfer or recycling sites |
Personal safety measures may include: | conflict management techniques correct use of safety rails and walkways fitness for duty hearing protection high visibility clothing location of pinch points manual handling techniques PPE required for the product class being transported safety footwear three points of contact when accessing/egressing vehicle/body |
Eco driving includes: | braking efficiently ensuring transmission control not over-revving engine observing speed limits using auxiliary braking controls vehicle sympathy |
Factors that may cause traffic delays and diversions include: | bridge or tunnel damage building construction emergency situations such as bushfires, flooding, changes to weather holiday traffic inefficient run planning livestock movement road closures for utility works such as electricity, water, sewerage or telecommunications road damage/road works traffic accidents vehicle breakdowns |
Workplace procedures may include: | established manufacturer organisational regulatory/codes of practice |
Documentation and records may include: | daily driver run sheet environmental documents relating to state of operation fatigue documentation mass/work diary vehicle reporting documentation |
Applicable procedures and codes may include: | Relevant state/territory procedures and codes for the vehicle including: fatigue management regulations licensing rules mass management regulations permit requirements road and traffic rules WHS/OHS and environmental legislation |
Not applicable.
This unit contains employability skills.
Refer to Unit Descriptor.