This unit involves the skills and knowledge required to drive a multi-combination vehicle safely, including maintaining systematic and efficient control of all vehicle functions, coupling and uncoupling dollies, monitoring traffic and road conditions, managing vehicle condition and performance and effectively managing hazardous situations.

Driving must be carried out in accordance with relevant state/territory roads and traffic authority licence requirements and regulations for multi-combination vehicles.

Driving is performed with limited supervision, and duty of care responsibility for self and others in achieving the prescribed outcomes.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Drive multi-combination vehicle

1.1

Multi-combination vehicle is started, steered, manoeuvred, positioned and stopped in accordance with traffic regulations and manufacturer instructions

1.2

Engine power is managed to ensure efficiency and performance, and to minimise engine and transmission damage

1.3

Multi-combination vehicle braking system is managed and operated to ensure effective control of vehicle under all conditions

1.4

Driving hazards are identified and/or anticipated and avoided or controlled through defensive driving

1.5

Multi-combination vehicle is driven in reverse, maintaining visibility and achieving accurate positioning

1.6

Multi-combination vehicle is parked, shut down, uncoupled and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures

1.7

Appropriate signage and lights are checked for operational effectiveness and for conformity to prescribed traffic regulations

1.8

Appropriate procedures are followed in a driving emergency

2

Monitor traffic and road conditions

2.1

Most efficient and permissible route of travel is taken by monitoring and anticipating traffic flows and conditions, road standards and other factors likely to cause delays or route deviations

2.2

Traffic and road conditions are constantly monitored and acted on to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities

3

Monitor and maintain vehicle performance

3.1

Vehicle performance is maintained through pre-operational inspections and vehicle checks

3.2

Prime mover, dollies and trailer are aligned and coupled in proper sequence in accordance with manufacturer instructions and workplace procedures

3.3

Coupled vehicle is checked and tested to ensure it is correctly secured and to confirm it is fully operational

3.4

Performance and efficiency of vehicle operation is monitored during use

3.5

Defective or irregular performance or malfunctions are reported to appropriate authority

3.6

Vehicle records are maintained/updated and information is processed in accordance with workplace procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

applying precautions and required action to minimise, control or eliminate identified hazards

checking and replenishing fluids and carrying out lubrication processes

completing relevant documentation

monitoring and anticipating traffic hazards and taking appropriate action

monitoring performance of vehicle, its trailers and its equipment and taking appropriate action as required

operating and adapting to differences in equipment in accordance with standard operating procedures

reading and interpreting relevant instructions, procedures, information and signs

reporting and/or rectifying identified problems, faults or malfunctions promptly, in accordance with regulatory requirements and workplace procedures.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

causes and effects of fatigue on drivers

differences between transmission types

driving hazards and related defensive driving techniques

efficient driving techniques

engine power management and safe driving strategies

factors that increase fatigue-related accidents

factors that may cause traffic delays and diversions and related action that can be taken

fatigue management strategies including on-road techniques

lifestyles that promote effective long-term fatigue management

map reading and road navigation techniques

multi-combination vehicle controls, instruments and indicators, and their use

multi-combination vehicle handling procedures

pre-operational checks carried out on multi-combination vehicle and related action

principles of operation of air brakes and procedures for their use

principles of stress management when driving a vehicle

relevant work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations

relevant state/territory road traffic authority road rules, regulations, permit and licence requirements

workplace driving and operational instructions.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment of this unit may be undertaken within a licensing examination conducted by, or under the authority of, the relevant state/territory road traffic authority.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.