A chemical tanker vehicle must be operated in compliance with the Dangerous Goods Act and vehicle licence requirements and regulations pertaining to heavy vehicles relative to the relevant state and territory and traffic authorities.

A chemical tanker is operated with limited or minimum supervision, with accountability and responsibility for self and others in achieving the prescribed outcomes.

ELEMENT

PERFORMANCE CRITERIA

1. Identify the properties and hazards of the chemicals being transported and the features of the chemical tankers that transport chemicals

1.1 UN number, product class, its packing group and any sub-risks of the fuel being transported are identified in accordance with emergency response documentation

1.2 Approved handler and approved filler requirements for the chemicals being transported are identified in accordance with the regulatory requirements

1.3 Properties of the chemicals being transported are identified in accordance with emergency response documentation

1.4 Hazards associated with the chemicals being transported are identified in accordance with emergency response documentation

1.5 Hazardous atmosphere zones are identified in accordance with organisational requirements

1.6 Circumstances in which a chemical tanker may be left unattended are described in accordance with the current Australian Dangerous Goods (ADG) Code and company procedures

1.7 Functions of equipment fitted to a chemical tanker are identified in relation to the safe transfer and transport of chemicals

1.8 Factors that cause static electricity and ways of minimising the risks associated with it are identified in accordance with organisational requirements

2. Carry out a pre-trip inspection

2.1 Vehicle is inspected to confirm that the tanker 5-yearly hydrostatic test is current, that it is tagged and compliant with the ADG Code, and meets company procedures; and non-compliant vehicles or trailers are repaired or reported in accordance with company procedures

2.2 Vehicle load transfer equipment is inspected to confirm security and state of repair, and that all hoses are tested and tagged according to the ADG Code; and non-compliant equipment is repaired or reported in accordance with company procedures

2.3 Safety equipment is inspected to confirm that it meets organisational and ADG Code requirements, is accessible and properly maintained, stowed and secured; and unserviceable items, or items with expired test dates, are replaced or reported in accordance with company procedures

2.4 Personal protective equipment (PPE) is inspected to confirm that it is available, ready for use, and meets ADG Code requirements

2.5 Dangerous goods placards are inspected to confirm that they are correct for the load being carried and are displayed in accordance with the current ADG Code

3. Position the chemical tanker and prepare to load

3.1 Vehicle is driven into the loading site in accordance with site procedures and using PPE that complies with organisational and regulatory requirements

3.2 Vehicle is positioned without injury to people or damage to property and in a position that enables loading to be carried out in accordance with site procedures

3.3 Park brake is applied, engine turned off and, where applicable, battery is isolated

3.4 Locations of emergency equipment and emergency procedures are identified before loading commences

3.5 Product type and quantity to be loaded are checked to confirm that they are in accordance with delivery documentation and are within the safe carrying capacity and gross weight limitations of the vehicle, and any discrepancies are rectified in accordance with company procedures

3.6 Product transfer equipment is connected in accordance with organisational requirements

4. Load a chemical tanker with chemicals

4.1 Site procedures are followed for commencement of the loading process

4.2 Products to be loaded are checked for compatibility and correct segregation, also taking account of product sub-risks

4.3 Products to be loaded are checked to ensure that they are compatible with the tanker and that tanker is fit for purpose

4.4 Loading process and fill levels are monitored by the driver in accordance with company and site procedures

4.5 Vehicle is safely loaded with chemicals using only approved equipment and in accordance with organisational and regulatory requirements

4.6 At completion of the loading process, all valves on the vehicle and load-out facility are closed and where site procedures specify, then all transfer equipment is vented and/or depressurised before being disconnected and stowed, with all equipment secured in accordance with site and company procedures

4.7 Loaded vehicle is confirmed as being within legal weight limitations and complying with company and regulatory procedures

4.8 Loaded vehicle is inspected pre-departure to ensure all hoses, pipes and cables are disconnected and secure, brake interlock is deactivated if fitted, and any obstacles cleared in accordance with company and site procedures

4.9 Site is restored to a clean and tidy condition in accordance with site procedures

4.10 Vehicle is moved from the loading area without damage to property or injury to people and in accordance with site procedures

4.11 Delivery documentation is completed, checked, and secured in the vehicle in accordance with regulatory requirements

4.12 Vehicle and tanker are checked to ensure correct placarding

5. Transport a load safely and efficiently to a customer site

5.1 Tanker is driven and manoeuvred in accordance with legal requirements, taking into consideration eco-driving techniques

5.2 Any prescribed routes are followed in accordance with organisational requirements, exhibiting courtesy and professionalism toward other road users

6. Deliver a load of chemicals to a customer site

6.1 Pre-delivery assessment is made before entering the delivery site, and site features that constitute a hazard and/or prevent delivery are rectified or reported in accordance with organisational and site requirements

6.2 Any site instructions and/or restrictions are complied with

6.3 Vehicle is manoeuvred and positioned in such a way that the product can be delivered efficiently and safely, with the park brake applied and engine, unless required for pumping, turned off

6.4 PPE is used in accordance with organisational and regulatory requirements and steps are taken to apply personal safety measures

6.5 Worksite is marked with signs and/or cones and driver remains with the vehicle and manages the delivery, managing potential hazards in accordance with organisational and site requirements

6.6 Receiving vessel and components are checked for damage, and contents are checked to ensure sufficient ullage exists for the delivery, with any deficiencies reported or actioned in accordance with company and site procedures

6.7 Preparation for delivery is consistent with organisational and site requirements

6.8 Product type and quantity are confirmed against delivery documents

6.9 Delivery is undertaken in line with the product being delivered, company and site procedures, and special delivery instructions

6.10 Pressure gauges if fitted are checked, valves opened and closed in the correct sequence, and hoses and connections checked for leaks

6.11 At the completion of delivery, product transfer equipment is disconnected in accordance with the product type, and company and site procedures

6.12 Site is secured and restored to a clean and tidy condition in accordance with site procedures

6.13 Delivery documentation is completed to reflect changes in vehicle load and receiving vessel, and distributed in accordance with organisational and regulatory requirements

6.14 Vehicle is inspected pre-departure in accordance with organisational requirements

6.15 Vehicle is driven from the site safely and in accordance with site and organisational procedures

7. Apply driver emergency procedures in the event of an emergency

7.1 Procedures for emergencies that may occur during loading and unloading are followed in accordance with emergency response documentation and organisational transport emergency response plan (TERP)

7.2 Procedures for emergencies that may occur in transit are identified in accordance with emergency response documentation and organisational TERP

7.3 Emergency response documentation and organisational requirements are followed in initial responses to a person exposed to the chemicals being transported

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills required at the completion of this unit.

Required knowledge:

Relevant road rules, regulations, permit and licence requirements of the relevant state and territory roads and traffic authority

Relevant OH&S and environmental procedures and regulations relating to chemical tanker operations

Relevant dangerous goods information pertaining to operating chemical tankers

Workplace driving and operational instructions

Procedures to be followed in the event of a driving emergency and in response to a TERP

Efficient driving techniques and eco-driving considerations

Safe delivery of chemicals to a customer site

Factors that may cause traffic delays and diversions

Loading and unloading procedures for chemical tankers

Factors involved in trip preparation

Workplace documentation

Required skills:

Current dangerous goods licence

Identify a product and placard the tanker accordingly

Read and interpret instructions, procedures, information and signs relevant to operating chemical tankers

Interpret and follow operational instructions and prioritise work

Complete documentation relating to operating chemical tankers

Work collaboratively with others when operating a chemical tanker

Adapt appropriately to cultural differences in the workplace and customer sites, including modes of behaviour and interaction with others

Implement contingency plans for unexpected events when operating a chemical tanker

Apply precautions and required action to minimise, control or eliminate hazards that may exist when operating a chemical tanker

Monitor and anticipate traffic hazards and take appropriate action

Modify activities depending on differing operational contingencies, risk situations and environments

Apply fatigue management knowledge and techniques

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Operate and adapt to differences in equipment in accordance with standard operating procedures

Select and use required PPE, conforming to industry and OH&S standards

Monitor performance of chemical tanker, its trailers and equipment, and take appropriate action where required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of:

applying techniques for loading and unloading a chemical tanker

identifying the properties of the chemicals to be carried

applying the correct placarding required for the product being loaded

identifying the PPE required for the product being transported

applying eco-driving techniques when operating chemical tankers

understanding relevant legislation and workplace procedures for transporting chemicals

understanding customer requirements when delivering fuel to a customer’s site

planning routes to avoid congested areas, tunnels or areas where people may congregate

Context of and specific resources for assessment

Access is required to:

relevant and appropriate materials and equipment to meet the performance criteria

applicable documentation, including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Practical assessment must occur:

in three different aspects of the job function in the workplace

ensuring written and verbal understanding of all classes to identify compatibility, e.g. tanker with product

A simulator is not suitable for final assessment of this unit of competency

RANGE STATEMENT

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Properties and hazards of chemicals include understanding:

effect of heat and pressure on the chemical when stored in a container

characteristics of the fuel in a leak, fire situation, or in the presence of static electricity

density

odour

expansion rates

segregation requirements

Equipment fitted to a chemical tanker may include:

eyewash kit

fire extinguishers

emergency shutdown controls

emergency information holder

Chemical tanker vehicle includes:

all vehicle configurations

Loading and unloading site may include:

refinery

customer site

depot

Personal safety measures may include:

manual-lifting techniques

three points of contact when using ladders

correct use of safety rails and walkways

safety footwear

high visibility clothing

hearing protection

PPE required for the product class being transported

Product transfer equipment may include:

delivery hoses

scully systems

external piping and fittings

bonding devices

pressure vessels

master switch

valves

warning devices

brake interlock

pressure and ullage gauges

Eco driving includes:

observing speed limits

ensuring transmission control

using auxiliary braking systems

Factors that can cause traffic delays and diversions may include:

traffic accidents

flooded sections of road

road damage

bridge or tunnel damage

road works

building construction

emergency situations, such as bushfires

livestock movement

holiday traffic

road closures for utility works, such as electricity, water, sewerage and telecommunications

Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established procedures

regulatory procedures

Documentation and records may include:

dangerous goods paperwork

emergency procedure guides or HB76 Handbook

dangerous goods licence

site inductions

state and territory heavy vehicle driving licence or permit requirements

state and territory road rules

workplace driving instructions and procedures

vehicle manufacturer instructions, specifications and recommended driving procedures, including pre-operational checks of vehicle

emergency procedures

TERP

vehicle work diaries or record books

Applicable procedures and codes may include:

Australian code for the transport of dangerous goods by road or rail: the current ADG Code

relevant state and territory:

roads and traffic authority driving regulations and licence or permit requirements pertaining to operating heavy vehicles on unsealed roads

road rules

OH&S legislation

fatigue management regulations

This unit contains employability skills.