- TLID3033A - Operate a vehicle-mounted loading crane
TLID3033A
Operate a vehicle-mounted loading crane
Application
Work must be carried out in compliance with the licence/permit requirements and regulations of the relevant state/territory authorities pertaining to vehicle-mounted loading cranes. Work is performed under general supervision. It involves the application of routine principles and procedures to the operation of a vehicle-mounted loading crane in a variety of operational contexts. |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1Position and stabilise crane | 1.1 Crane is driven to position as per job plan to ensure safe operation in accordance with applicable Australian standards, codes of practice, manufacturers specifications and, where applicable, regulatory and local government requirements 1.2 Where appropriate, barriers, fencing, temporary boundaries, signage and the like are used to isolate working area in accordance with safe working practice and lift requirements 1.3 Ground is checked to ensure it is firm enough to bear the load 1.4 Appropriate plates or packing are correctly used to adequately distribute the load 1.5 Any outriggers and stabilisers are correctly deployed and positioned in accordance with manufacturers instructions and the appropriate Australian standard and other relevant statutory regulations or local authority requirements 1.6 Outrigger packing is checked for adequacy prior to and after load is taken |
2Operate vehicle-mounted crane | 2.1 Planned hazard control strategies are implemented 2.2 Required signals are correctly given, interpreted and followed in accordance with appropriate Australian standards 2.3 Load mass is assessed and correlated with lifting capacity of crane throughout proposed radii of operation 2.4 Appropriate lifting gear is selected and load secured 2.5 Load is hoisted and lowered into position using crane movements in accordance with the appropriate Australian standard 2.6 Crane controls are operated smoothly 2.7 Crane is shut down and secured during periods of non-operation according to manufacturers specifications and workplace procedures |
3Monitor lift conditions | 3.1 Load is constantly monitored to ensure load and structural stability 3.2 Conditions which may affect the continuing stability of the crane are identified and monitored 3.3 Unplanned situations are responded to in line with workplace procedures in a manner that minimises risk to personnel and equipment 3.4 Advice is sought from supervisor where there is doubt about correct response to unanticipated conditions, or conflict with customer request 3.5 Supervisor/allocator is advised of any concern about completing the job within timeframe 3.6 Shut-down procedures are implemented in accordance with manufacturers instructions in the event of an emergency 3.7 The relevant motion locks and brakes are applied 3.8 Crane is shut down using the correct sequence of procedures in accordance with manufacturers specifications and workplace procedures 3.9 Routine post-operational equipment checks are carried out in accordance with manufacturers specifications |
4Pack up crane | 4.1 All lifting equipment and crane components are checked for any signs of deterioration or damage in accordance with the appropriate Australian standard 4.2 Damaged or worn equipment is segregated and reported to an authorised person for testing/repair/destruction 4.3 Crane equipment is correctly stowed and secured in accordance with manufacturers instructions and the appropriate Australian standard 4.4 Crane is immobilised and secured for travel in accordance with manufacturers instructions, workplace guidelines and regulatory requirements |
5Complete job records | 5.1 Customer feedback is sought regarding satisfaction with the completed job and any areas of concern reported according to workplace procedures 5.2 Customer's signature on job completion documentation is obtained 5.3 Required workplace records are updated accurately and promptly and processed according to workplace procedures |
Required Skills
REQUIRED KNOWLEDGE AND SKILLS |
This describes the essential knowledge and skills and their level required for this unit. |
Required knowledge: |
Relevant road rules, regulations, permit and licence requirements pertaining to mobile crane operation |
Relevant OH&S and environmental procedures and regulations |
Mobile crane applications, capacities, configurations, safety hazards and control mechanisms |
Operational procedures for crane crews |
Prioritising and multi-tasking work |
Company work procedures concerning the setting up and rigging of a mobile crane at a work site |
Problems that may arise when operating a vehicle-mounted loading crane and actions that should be taken to prevent or solve them |
Focus of operation of work systems and equipment |
Application of relevant agreements, codes of practice or other legislative requirements |
Required skills: |
Communicate effectively with others when operating a vehicle-mounted loading crane |
Read and interpret instructions, procedures, information and signs relevant to the operation of a vehicle-mounted loading crane |
Interpret and follow operational instructions and prioritise work |
Complete documentation related to the operation of a vehicle-mounted loading crane |
Operate electronic communication equipment to required protocol |
Work collaboratively with others when operating a vehicle-mounted loading crane |
Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others |
Promptly report and/or rectify any identified problems, faults or malfunctions that may occur when operating a vehicle-mounted loading crane in accordance with regulatory requirements and workplace procedures |
Implement contingency plans for unanticipated situations that may arise when operating a vehicle-mounted loading crane |
Apply precautions and required action to minimise, control or eliminate hazards that may exist during the operation of a vehicle-mounted loading crane |
Plan own work including predicting consequences and identifying improvements |
Monitor work activities in terms of planned schedule |
Modify activities depending on differing operational contingencies, risk situations and environments |
Apply fatigue management knowledge and techniques |
Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment |
Operate and adapt to differences in equipment in accordance with standard operating procedures |
Select and use required personal protective equipment conforming to industry and OH&S standards |
Monitor performance of crane and its equipment and take appropriate action where required |
Service equipment in terms of maintenance schedule and standard operating procedures |
Check and replenish fluids and carry out lubrication processes in the course of work activities |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package. | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying: the underpinning knowledge and skills relevant legislation and workplace procedures other relevant aspects of the range statement |
Context of and specific resources for assessment | Performance is demonstrated consistently over a period of time and in a suitable range of contexts Resources for assessment include: a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or access to an appropriate range of relevant operational situations in the workplace In both real and simulated environments, access is required to: relevant and appropriate materials and equipment, and applicable documentation including workplace procedures, regulations, codes of practice and operation manuals |
Method of assessment | Assessment of this unit must be undertaken by a registered training organisation As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests Practical assessment must occur: through activities in an appropriately simulated environment at the registered training organisation, and/or in an appropriate range of situations in the workplace |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. | |
Operations may be conducted: | day or night in a variety of weather conditions |
Environment may include movement of: | equipment goods materials vehicular traffic |
Customers may be: | internal or external |
Mobile crane may be involved in work in a range of industry sectors including: | construction and demolition manufacturing waterfront mining primary industry utilities (electricity, gas, water) arboricultural swimming pool quarrying |
Hazards may include: | power lines noise, light, energy sources overhead service lines surrounding buildings, structures, facilities underground services obstructions uneven or unstable ground and recently filled trenches stationary and moving machinery and equipment hazardous or dangerous materials traffic hazards and congestion |
Hazard management is: | consistent with the principle of hierarchy of control with elimination, substitution, isolation and engineering control measures being selected before safe working practices and personal protective equipment |
Consultative processes may involve: | other employees and supervisors management union representatives clients industrial relations and OH&S specialists other professional or technical staff |
Requirements for access and/or lift may include: | site restrictions and procedures authorities and permits hours of operation induction slings, chains, nets, brackets and other specialised lifting equipment noise restrictions personal protective equipment support trucks additional gear and equipment communications equipment |
Personal protective equipment may include: | gloves safety headwear and footwear sunscreen, sunglasses and safety glasses two-way radios high visibility clothing |
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include: | company procedures enterprise procedures organisational procedures established procedures site procedures |
Documentation/records may include: | operations manuals for vehicle-mounted loading cranes Safe Working Load (SWL) and Working Load Limit (WLL) material safety data sheets induction documentation competency standards and training materials job specifications and procedures manufacturers specifications for vehicle-mounted loading cranes workplace operating procedures and policies supplier and/or client instructions communications technology equipment, oral, aural or signed communications personal and work area work procedures and practices conditions of service, legislation and industrial agreements including: workplace agreements and awards occupational health and safety procedures standards and certification requirements quality assurance procedures emergency procedures |
Applicable procedures and codes may include: | relevant state/territory regulations and licence/permit requirements pertaining to vehicle-mounted loading cranes relevant state/territory road rules relevant state/territory OH&S legislation relevant state/territory fatigue management regulations relevant state/territory environmental protection legislation |
Sectors
Not Applicable
Employability Skills
This unit contains employability skills. |
Licensing Information
Refer to Unit Descriptor