UEENEEB001B
Operate and maintain an amateur radio communication station

1) 1.1) This unit deals with operation and maintenance of an amateur radio communication station suitable to HF, VHF and SHF communication using multiple modes of operation. It encompasses correct operating procedures, safe working practices, following written and oral instruction and procedures, basic testing techniques, dismantling and assembling apparatus, disconnecting and reconnecting components, and operating to the Standard Licence Level as prescribed by the Australian Communication Media Authority.

Application

4)

This unit may apply to persons entering work in electrotechnology and may be used in school-based vocational programs.


Prerequisites

Prerequisite Unit(s)

2)

2.1) Competencies

There are no prerequisite competencies for this unit.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1

Prepare to operate an amateur radio communication station.

1.1

OHS procedures for a given work area are identified, obtained and understood through established routines and procedures

1.2

Established OHS risk control measures and procedures are followed in preparation for amateur radio activities

1.3

The nature of the operation of activity is identified to be within the Amateur Radio Standard Licence Conditions Determination

1.4

Sources of materials that may be required for the Amateur Radio activities are identified and utilised according to manufacturer specifications and established routines and procedures

1.5

Interference to other services is recognised and attended to by good operating practices, and advice is sought from the ACMA to ensure interference to other services does not occur

1.6

Resources, tools, apparatus and testing devices needed to carry out work are obtained and checked for correct operation and safety

2

Operate an amateur radio communication station.

2.1

Established OHS risk control measures and procedures for carrying out the work are followed

2.2

The need to test or measure equipment is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures

2.3

Circuits/apparatus are checked as being isolated where necessary in strict accordance with OHS requirements and procedures

2.4

Radio communications operating practices and procedures are demonstrated and are in accordance with established requirements

2.5

Amateur radio communication station is operated in accordance with Standard Licence Operator's level as prescribed by the Australian Communication Media Authority

2.6

Methods for dealing with unexpected situations are selected on the basis of safety, discussions with appropriate persons and specified work outcomes

2.7

Set-up is carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services and using sustainable energy principles

3

Maintain an Amateur Radio Station

3.1

OHS work completion risk control measures and procedures are followed.

3.2

Modules/sub-assemblies are tagged during the dismantling to help ensure correct and efficient reassembly and stored to protect them against loss or damage.

3.3

Apparatus is dismantled and assembled in accordance with manufacturer guidelines.

3.4

Repairs are affected efficiently without damage to other components, apparatus or circuits and in accordance with established procedures

3.5

Repairs are carried out efficiently without unnecessary waste of materials or damage to apparatus and the surrounding environment or services and using sustainable energy practices

3.6

Apparatus is assembled in an appropriate sequence with all modules/sub-assemblies and parts correctly placed, secured and connected in accordance with manufacturer guidelines and industry practice

3.7

Repaired radio equipment, where appropriate, is tested and returned to service to ensure operating parameters are not exceeded

3.8

Procedures for referring non-routine events to appropriate authorities are followed

3.9

Work and operating area is cleaned and made safe in accordance with established procedures

4

Identify and assemble amateur radio communication equipment and associated apparatus

4.1

Established OHS risk control measures and procedures for carrying out the work are followed

4.2

Requirements for the item to be assembled are identified

4.3

Item is assembled in accordance with established procedures and relevant engineering standards

4.4

Assembled unit is tested to ensure that the operating parameters of the station will not be compromised

4.5

Adjustments are made to the equipment where required to optimise reception

4.6

Commission the equipment as constructed for on air performance.

5

Complete work and maintain reports

5.1

OHS work completion risk control measures and procedures are followed

5.2

Work site is cleaned and made safe in accordance with established procedures

5.3

Adjustment settings are documented and appropriate person(s) notified in accordance with established procedures

Required Skills

7) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and carrying out radio station operation, basic maintenance and assembly of radio communication equipment.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

2.10.32

Amateur radio communication principles, practices, and technical overview

2.18.1

Occupational Health and Safety principles

Evidence Required

9) This provides essential advice for assessment of the unit. It must be read in conjunction with the performance criteria and the range statement of the unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

The Australian Communications and Media Authority and the Wireless of Australia have established agreed minimal assessment requirements for licensing of amateur radio stations, including the minimal requirements for assessors.

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required, regulatory requirements and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit . It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

Operate and maintain an amateur radio station, dismantling and assembling apparatus and disconnecting and reconnecting components including:

A

Following manufacturer service instructions and licence conditions determination for radio station assembly and dismantling, including transmitter, power, measurement and adjustment.

B

Demonstrating on HF and VHF correct operating procedure as prescribed by the Australian Communications and Media Authority.

C

Connecting and disconnecting components to radio equipment manufacturer requirements and appropriate engineering requirements, including minor soldering

D

Identifying common types of transmission lines, coaxial connectors, antennas and symbols.

E

Assembling a radio frequency choke used for the elimination of potential interference.

F

Testing a coaxial cable for continuity and standing wave ratio, including explaining how to correct a high standing wave ratio, and demonstrating the use of a signal strength metre.

G

Demonstrating the correct use of voice repeaters with and without continuous tone coded squelch system (CTCSS) and/or dual tone multi frequency signalling.

H

Correctly using an amateur radio according to ACMA licence and standard operating procedures

I

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items.

Note:
Successful completion of relevant vendor training may be used to contribute to evidence on which competency is deemed. In these cases the alignment of outcomes of vendor training with performance criteria and critical aspects of evidence shall be clearly identified.

Context of and specific resources for assessment

9.3)

This unit must be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Relevant Australian and International standards for the assembly and operation of an amateur radio station.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed in this unit.

These should also be part of the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment it must ensure that the conditions for assessment are authentic and as far as possible reproduce and replicate the workplace and is consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to assembling, dismantling and operating an amateur radio station, including the assembly of an antenna, power supply unit or an equivalent circuit.

Method of assessment

9.4)

This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires assessment in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.


Range Statement

8) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit must be demonstrated in relation to carrying out the operation and maintenance of an amateur radio communication station.

The operation and maintenance shall be limited to:

the requirements as prescribed by the Australian Communications and Media Authority, Amateur Operator Certificate of Proficiency (Standard) Syllabus Documentation and Licence Conditions Determination, and

Assembly of an antenna and power supply or equivalent item of apparatus to industry standards, that may include minor soldering

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.


Sectors

Not Applicable


Employability Skills

3)

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.


Licensing Information

1.2) License to practice

The skills and knowledge described in this unit do require an Australian Communications and Media Authority (ACMA) license to practice in the workplace provided equipment is not connected to permanent installation wiring at voltage above 50 V a.c. or 120 V d.c. However, practice in this unit is subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.