• UEGNSG603A - Load, unload and exchanging gas cylinders

UEGNSG603A
Load, unload and exchanging gas cylinders

1) This Competency Standard Unit covers the loading, unloading and exchanging of approved gas cylinders as per legislative requirements as used for distribution. Included are persons; tools and equipment; materials used in loading and exchanging; for the discharging of LPG by road tanker for the distribution. Persons involved in this standard are site manager; clerical persons; supervisors; other road tanker operators. Tools, of gas cylinders; appropriate delivery area at a terminal or customer location.

Application

3)

This competency standard shall apply to work sites where the distribution of liquefied petroleum gas occurs.


Prerequisites

Prerequisite Unit(s)

2)

Competencies

2.1)

Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed:

Nil


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1

Prepare worksite for loading, unloading and exchanging of gas cylinders

1.1

Work instructions are received and confirmed with appropriate persons

1.2

Relevant requirements and established procedures to be followed for the work to be performed are discussed with all persons to establish and confirm the work schedule

1.3

OHS, environmental and sustainable energy policies and procedures to be followed for the work to be performed are received and confirmed

1.4

Suggestions to assist with the loading, unloading and exchanging of gas cylinders are made to others involved in the work

1.5

Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored including emergency exits kept clear according to established procedures

1.6

Scope of responsibility under the relevant work permit are received and confirmed according to requirements and established procedures with relevant persons where appropriate

1.7

Resources including equipment, tools and personal protective equipment required for the job are obtained and in working order according to established procedures

1.8

Relevant responsibilities associated with First Aid and other related work safety procedures at the worksite are confirmed in accordance with requirements and established procedures to ensure safety measures and followed in the instance of an incident.

1.9

Client issues are referred to appropriate persons in accordance with industry standards

1.10

Site is prepared according to given instructions and the work schedule for a quality outcome and to minimise risk and damage to property, commerce and individuals in accordance with established procedures

2

Load/unload truck and exchanging cylinders

2.1

OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents and hazards

2.2

Lifting, climbing, working in confined spaces and aloft, and use of power tools, techniques and practices are safely followed in accordance with given instructions and according to requirements confirmed to eliminate the prospects of incidents

2.3

Operational knowledge for correct positioning of the truck, loading, unloading and exchanging of gas cylinders is confirmed to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements and established procedures

2.4

The loading, unloading and exchanging of gas cylinders is carried out in accordance with given instructions and established procedures

2.5

Cylinders are loaded and unloaded and potential hazards and safety risks are reported to the immediate authorised persons for directions according to established procedures

2.6

Non-routine events are referred to the immediate authorised persons for directions according to established procedures

2.7

Problems associated with the loading, unloading and exchanging of gas cylinders are dealt with using acquired known solutions and skills related to routine procedures to ensure work instructions and established procedures are met

2.8

Ongoing checks of quality of the work are undertaken in accordance with given instructions and established procedures

3

Notify completion of work

3.1

Work undertaken is checked against work schedule and anomalies reported to authorised persons in accordance with established procedures

3.2

Accidents and incidents are actioned and reported to authorised persons in accordance with established procedures

3.3

Work site is rehabilitated, cleaned up and made safe in accordance with given instructions and established procedures

3.4

Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures

3.5

Appropriate persons are notified of work completion according to established procedures

3.6

Delivery documentation and work completion records, report forms and data sheets are completed accurately in accordance with given instructions and established procedures

Required Skills

6) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices for loading, unloading and exchanging gas cylinders. The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

G 2.1.1

Working in the gas sector

G 2.1.2

Identify roles of statutory authorities

G 2.1.3

Identify employment roles and responsibilities

G 2.1.4

Apply relevant OHS regulations, policies and procedures

G 2.1.5

Maintain safe, clean and healthy workplace

G 2.1.6

Work safely with hazardous materials and equipment

G 2.1.7

Apply safe manual handling techniques in the workplace

G 2.1.8

Control traffic at the work site

G 2.1.9

Respond to emergency and accident situations

G 2.1.10

Apply relevant environmental legislation, regulations and codes of practice

G 2.1.11

Protect and maintain the environment

G 2.1.12

Communicate in the workplace

G 2.1.13

Communicate effectively in a team

G 2.1.14

Read and interpret workplace documents

G 2.1.15

Complete routine workplace forms, memos and reports

G 2.1.16

Identify requirements of work activity

G 2.1.17

Apply basic planning skills

G 2.1.18

Conduct tasks to complete work activity

G 2.1.19

Review work activity

G 2.1.20

Customer relations

G 2.1.21

Problem solving

G 2.1.22

Confined spaces

G 2.1.23

Work site environmental compliance

G 2.1.24

Work site environmental impact

G 2.6.1

Occupational Health and Safety for working with LPG

G 2.6.3

Operate equipment within its limitations

G 2.6.5

Communicating in an LPG environment

Evidence Required

8)

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

8.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be 'rich' in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

8.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines UEG06'. Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range

Apply sustainable energy principles and practices as specified in the Performance Criteria and range

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner's performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti discrimination legislation, regulations, polices and workplace procedures

Demonstrate performance across a representative range of contexts from the prescribed items below.

Range of tools/equipment/materials/procedures/workplaces/
other variables

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

All

Cylinder trolley

Hoses and fittings

Tools and equipment

Leak detection devices

Truck tail gate loader

Correct storage

Tray gates and ropes

B

All

OHS procedures followed

Australian Dangerous Goods Code

Emergency procedures and response action

State regulations/statutes and permits

Working knowledge of AS 2865

Delivery area checked for ignition sources

C

All

Maintain a safe and clean workplace

Work safely with hazardous materials and equipment

Job safety analysis

Apply safe manual handling techniques

Respond to emergency situations

Communicate effectively in the workplace

Apply basic planning and job completion skills

Operate equipment within its limitations including basic technology

D

At least one occasion

Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

8.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Competency Standard Unit.

Appropriate environmental regulation and work practices.

Appropriate organisational requirements.

Appropriate work environment, equipment and tools.

In addition to the resources listed above, in Context of and specific resources for assessment, evidence should show demonstrated competency in loading, unloading and exchanging gas cylinders.

Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the Key Competencies in section 6.7 of this competency standard.

Method of assessment

8.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit.

Concurrent assessment and relationship with other units

8.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied Competency Standard Units where listed.

UEGNSG102A

Carry out work activities in a utilities industry work environment

UEGNSG103A

Comply with workplace OHS procedures and practices

UEGNSG104A

Comply with environmental policies and procedures

UEGNSG105A

Establish the work site

Key Competencies

8.6)

Evidence that particular Key Competencies have been achieved within this Competency Standard Unit is in the context of the following Performance Criteria of evidence. See Volume 2, Part 4 for an explanation of Key Competencies and levels of this Training Package.

Key Competencies

Example of Application

Performance Level

How are ideas and information communicated within this competency?

Refer to the following Performance Criteria for examples of application:

1

1.4; 2.6; 3.5

How can information be collected, analysed and organised?

Refer to the following Performance Criteria for examples of application:

2

1.5; 2.5; 3.1; 3.6

How are activities planned and organised?

Refer to the following Performance Criteria for examples of application:

1

1.2

How is team work used within this competency?

Refer to the following Performance Criteria for examples of application:

2

1.2; 1.4

How are mathematical ideas and techniques used?

Refer to the following Performance Criteria for examples of application:

N/A

How are problem solving skills applied?

Refer to the following Performance Criteria for examples of application:

N/A

How is use of technology applied?

Refer to the following Performance Criteria for examples of application:

N/A

Skills Enabling Employment

8.7)

Evidence that competency in this unit incorporates skills enabling employment is in the context of the following performance. See Volume 2, Part 5 for definitions and an explanation of skills enabling employment.

Skills for Employment

Example of Application

1

Developing and using skills within a real workplace

Refer to the following Performance Criteria for examples of application:

All

2

Learning to learn in the workplace

Refer to the following Performance Criteria for examples of application:

1.1; 1.5

3

Reflecting on the outcome and process of work task

Refer to the following Performance Criteria for examples of application:

3.1; 3.6

4

Interacting and understanding of the context of the work task

Refer to the following Performance Criteria for examples of application:

1.2; 2.5; 2.8; 3.3

5

Planning and organising the meaningful work task

Refer to the following Performance Criteria for examples of application:

1.4; 1.5; 1.7

6

Performing the work task in non-routine or contingent situations

Refer to the following Performance Criteria for examples of application:

2.6; 2.7


Range Statement

7) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit shall/may be demonstrated in relation to loading, unloading and exchanging gas cylinders.

The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:

Appropriate Persons

Tools, Equipment and Materials

Records/Documentation

Delivery Area

Loading and Unloading of Cylinders


Sectors

Not Applicable


Employability Skills

Refer to the Evidence Guide


Licensing Information

License to practice

3.1)

The skills and knowledge described in this unit are not subject to licence regulation other than those directly related to Occupational Health and Safety, gas/electricity/water industry safety and compliance, industrial relations, environmental protection, telecommunications, anti discrimination and training. Commonwealth, State/Territory or Local Government legislation and regulations may exist that limits the age of operating certain equipment.