UEGNSG612A
Supervise technical operations for liquefied petroleum gas storage and processing

1) This Competency Standard Unit covers the technical supervision of liquefied petroleum gas storage, processing and maintenance operations. The competency standard refers to Resources; Activities; Appropriate Persons; Relevant Persons; Monitoring; Operational Requirements; Effective Communication; Types of Gas System Faults; Relevant Documentation; Legislative Requirements; Records and reports

Application

3)

This competency standard shall apply to any work site where liquefied petroleum gas operations occur.


Prerequisites

Prerequisite Unit(s)

2)

Competencies

2.1)

Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed:

Nil


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1

Plan and prepare to supervise operations

1.1

Operational area is checked for hazards and the works schedule(s), including drawings, plans, requirements, established procedures and material lists are detailed, analysed if necessary by site inspection and the extent of the preparation of the work determined for planning and coordination

1.2

Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes to a quality standard and in accordance with established procedures

1.3

Risk control measures for identified hazards are prioritised, implemented and monitored against the work schedule

1.4

Relevant requirements and established procedures for the work are communicated to all persons and identified for all work sites

1.5

OHS, environmental and sustainable energy policies and procedures related to the work are identified to ensure safe systems of work are followed

1.6

Relevant work permits are secured to coordinate the performance of work according to requirements and or established procedures

1.7

Resources including appropriately licensed persons, equipment, tools and personal protective equipment required for the job are identified, scheduled, coordinated and confirmed in a safe and technical working order

1.8

Clients are provided with possible solutions and options within the scope, acceptable cost and requirements

1.9

Liaison and communication issues with authorised persons, authorities, clients and land owners are resolved and activities coordinated to carry out work

1.10

Persons participating in the work, including plant operators and contractors are fully briefed and respective responsibilities coordinated and authorised where applicable in accordance with established procedures

1.11

Status of the system is sought through communication with pipeline control centre in accordance with established procedures

1.12

Expenditure is forecast and managed to keep within operational budget constraints

2

Supervise operations

2.1

OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents and hazards

2.2

Appropriate persons are inducted according to company standard operating procedures

2.3

First Aid and other related work procedures are performed according to requirements and established procedures

2.4

Lifting, climbing, working in confined spaces, excavations, trenches, and aloft, use of power tools, techniques and practices are safely exercised according to requirements

2.5

Equipment faults are identified through inspection and testing of operational equipment in accordance with a work schedule and to requirements

2.6

Hazard warnings and safety signs are recognised and hazards and assessed OHS risks are reported to the immediate authorised persons for directions according to established procedures

2.7

Operating conditions of equipment are monitored through gauge levels, temperatures, flow indicators in order to determine performance of equipment and system

2.8

Information concerning the operation of the pipeline system is monitored and conveyed to relevant persons to ensure safe and efficient operation of the pipeline system

2.9

Fault finding and troubleshooting techniques are applied to operational systems and equipment to identify any repairs or maintenance that is required according to requirements and established procedures

2.10

Essential Knowledge and Associated Skills are applied to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements

2.11

Solutions to non-routine problems are identified and actioned using Essential Knowledge and Associated Skills according to requirements

2.12

Ongoing checks of quality of the work are undertaken in accordance with requirements and established procedures to ensure a quality outcome is achieved for the client/customer to a community and industry standards

3

Finalise completion details

3.1

Work undertaken is checked against works schedule for conformance with requirements and anomalies which are reported and solutions identified in accordance with established procedures

3.2

Accidents and injuries are reported and followed up in accordance with requirements and established procedures

3.3

Work site is rehabilitated/cleaned up and confirmed safe and in accordance with established procedures

3.4

Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures

3.5

Relevant work permit(s) are signed off in accordance with requirements

3.6

Works completion records, reports as installed/modified drawing(s) and documentation and information is confirmed, processed and the appropriate persons notified

Required Skills

6) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices for the supervising of technical operations for liquefied petroleum gas storage and processing. The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

G 3.6.1

Working safely in an LPG environment

G 3.6.6

Technical drawings

G 5.6.1

Supervision of LPG processes

G 5.6.2

Odourant levels for LPG processing

G 5.6.3

LPG plant and equipment

Evidence Required

8)

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

8.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be 'rich' in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

8.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines UEG06'. Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range

Apply sustainable energy principles and practices as specified in the Performance Criteria and range

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner's performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti discrimination legislation, regulations, polices and workplace procedures

Demonstrate performance across a representative range of contexts from the prescribed items below.

Range of tools/equipment/materials/procedures/
workplaces/other variables

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

At least 5

Resources:

Vessels

Pumps

Compressors

Valves

Product

Control and monitoring equipment

Mixing and sampling equipment

Air equipment

B

At least 3

Activities:

Product revival, processing and/or dispatch

Rectification of gas system faults

Scheduling of maintenance, repairs and/or modifications

Commissioning of new plant and/or equipment

Stock control

C

At least 5

Monitoring of storage/processing facilities:

Pressure

Temperature

Volume

Corrosion

Liquid/vapour leaks

Product levels

Product levels

Security

D

At least 3

Operational requirements:

Product levels

Product blending/mixing/odourising

Manufacturers maintenance requirements

Rectification of gas system faults

E

At least 4

Types of faults:

Liquid/vapour leaks

Electrical problems

Mechanical failure

Over filled vessel

Out of current inspection status

Gauge failure

F

All

Working safely in an LPG environment

Interpreting technical drawings

Determining odourant levels for LPG processing

OHS and associated legislative requirements

ADG Code

G

At least one occasion

Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

8.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Competency Standard Unit.

Appropriate environmental regulation and work practices.

Appropriate organisational requirements.

Appropriate work environment, equipment and tools.

In addition to the resources listed above, in Context of and specific resources for assessment, evidence should show demonstrated competency in supervising technical operations for liquefied petroleum gas storage and processing.

Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the Key Competencies.

Method of assessment

8.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit.

Concurrent assessment and relationship with other units

8.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied Competency Standard Units where listed.

BSBFLM405A

Implement operational plans

BSBCMN411A

Monitor a safe workplace

Key Competencies

8.6)

Evidence that particular Key Competencies have been achieved within this Competency Standard Unit is in the context of the following Performance Criteria of evidence. See Volume 2, Part 4 for an explanation of Key Competencies and levels of this Training Package.

Key Competencies

Example of Application

Performance Level

How are ideas and information communicated within this competency?

Refer to the following Performance Criteria for examples of application:

3

1.4; 1.8; 1.9; 1.10

How can information be collected, analysed and organised?

Refer to the following Performance Criteria for examples of application:

2

1.2; 1.3

How are activities planned and organised?

Refer to the following Performance Criteria for examples of application:

2

1.2; 1.7

How is team work used within this competency?

Refer to the following Performance Criteria for examples of application:

2

1.2; 1.4; 1.10

How are mathematical ideas and techniques used?

Refer to the following Performance Criteria for examples of application:

N/A

How are problem solving skills applied?

Refer to the following Performance Criteria for examples of application:

2

2.11

How is use of technology applied?

Refer to the following Performance Criteria for examples of application:

2

3.6

Skills Enabling Employment

8.7)

Evidence that competency in this unit incorporates skills enabling employment is in the context of the following performance. See Volume 2, Part 5 for definitions and an explanation of skills enabling employment.

Skills for Employment

Example of Application

1

Developing and using skills within a real workplace

Refer to the following Performance Criteria for examples of application:

All

2

Learning to learn in the workplace

Refer to the following Performance Criteria for examples of application:

1.2; 1.3; 2.11

3

Reflecting on the outcome and process of work task

Refer to the following Performance Criteria for examples of application:

3.6

4

Interacting and understanding of the context of the work task

Refer to the following Performance Criteria for examples of application:

1.2; 1.4; 1.9; 2.11

5

Planning and organising the meaningful work task

Refer to the following Performance Criteria for examples of application:

1.2; 1.3

6

Performing the work task in non-routine or contingent situations

Refer to the following Performance Criteria for examples of application:

2.11


Range Statement

7) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit shall/may be demonstrated in relation to supervising technical operations for liquefied petroleum gas storage and processing.

The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:

Resources

Activities

Appropriate persons (5)

Relevant persons

Monitoring

Operational requirements (5)

Effective communication (5)

Types of gas system faults

Relevant documentation (5)

Legislative requirements (5)

Records/reports (5)


Sectors

Not Applicable


Employability Skills

Refer to the Evidence Guide


Licensing Information

License to practice

3.1)

The skills and knowledge described in this unit are not subject to licence regulation other than those directly related to Occupational Health and Safety, gas/electricity/water industry safety and compliance, industrial relations, environmental protection, telecommunications, anti discrimination and training. Commonwealth, State/Territory or Local Government legislation and regulations may exist that limits the age of operating certain equipment.