The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Assist in the preparation of the work site
|
|
Assistance is provided to confirm the location of worksite and location of the correct tree as per the scope of works. Completed |
Evidence:
|
Required site permits and licences are obtained. Completed |
Evidence:
|
Assistance is provided to a qualified arborist in the inspection of the tree for structural defects. Completed |
Evidence:
|
Site hazards are identified; risks assessed and reported to the supervisor or qualified arborist. Completed |
Evidence:
|
The work zone is confirmed with the work crew and is monitored. Completed |
Evidence:
|
Traffic management plans for the work site are implemented as instructed. Completed |
Evidence:
|
Prepare for rigging
|
|
Rigging method is discussed by the work crew and determined by supervisor or qualified arborist. Completed |
Evidence:
|
Rigging method confirms the risk controls selected in accordance with established and documented low risk work methods. Completed |
Evidence:
|
Appropriate rigging equipment is selected as directed. Completed |
Evidence:
|
Rigging equipment is examined, assembled, installed and checked for equipment defects. Completed |
Evidence:
|
Perform rigging operations
|
|
Communication with the person cutting is commenced, instructions are received and appropriate responses are provided. Completed |
Evidence:
|
Appropriate knots are selected and tied as required. Completed |
Evidence:
|
Rigging system and environmental conditions are monitored. Completed |
Evidence:
|
Rigging is adjusted as instructed. Completed |
Evidence:
|
Load is controlled and raised, lowered or re-directed as instructed. Completed |
Evidence:
|
Load is disconnected from the rigging system and rigging equipment is checked. Completed |
Evidence:
|
The appropriate component of the rigging system is returned to the person cutting. Completed |
Evidence:
|
Complete rigging operations
|
|
The load is removed from the drop zone. Completed |
Evidence:
|
Rigging operations are completed as per scope of works. Completed |
Evidence:
|
Tools, equipment and machinery are cleaned, checked, and replaced if faulty or worn, and stored. Completed |
Evidence:
|