Determine design requirements

1. Water is predicted to be available in sufficient quantity and quality for the particular crop or situation at the time it is needed by the enterprise.
2. Water transfer, recharge, reuse and harvesting systems are designed to conserve natural resources.
3. The process of collecting or storing water does not degrade the water quality for the enterprise or the environment.
4. Construction specifications define the work required to make suitable water available to the enterprise in accordance with environmental and Occupational Health and Safety (OHS) requirements.
5. Environmentally sensitive areas are identified and protected according to local, State and National legislation.
6. Design calculations and decisions are documented to enterprise requirements.

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Define pumping and power systems

1. Pumps are selected to deliver water efficiently when needed, from the water storage at the flow and pressure required to operate the distribution system to the design specifications.
2. The pump motor combinations are efficient and the pumps are reliable, functional, serviceable and flexible for the intended application.
3. Energy requirements are determined, and layout of electricity lines are determined and checked with local authority.
4. The relationship between capital and operational costs are optimised including a comparison of energy sources.
5. Structures, valves and accessories are selected and integrated into a functional system that can be monitored and maintained according to enterprise guidelines.
6. Performance indicators, design calculations and decisions are documented according to enterprise guidelines.
7. Construction specifications define work required to make suitable pumping and power system available to enterprise.
8. Power supply design specification is checked with power authorities.

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Design an irrigation distribution system

1. Detailed topographic survey is conducted or an accurate map is obtained showing extent of irrigation, planting layout, physical constraints and contours with suitable interval.
2. Detailed soil survey is conducted at suitable intervals and mapped to show variation in readily available water.
3. Water budgets are determined having regard to the evapotranspiration state of the crop/plants, soil moisture characteristics and cultural practices.
4. Distribution systems are evaluated and designed with respect to a range of key variables.
5. Pipes, valves and fittings are sized according to design system specifications so that capital cost is balanced against operation costs over the anticipated system life.
6. Flows, water levels and pressures are calculated and documented to be within the acceptable tolerances for optimum performance.
7. Flows, water levels and pressures are achievable by the pumps operating at optimum efficiency and according to enterprise standards.
8. Mechanisms for controlling and adjusting pressure are included, and isolation valves direct water to areas with different irrigation schedules.
9. Channel systems and attendant structures are designed according to industry recommendations, and channel flow velocities are calculated according to enterprise standards.
10. Soil types have been compared for erodeability and suitable fill has been selected for construction according to enterprise standards.
11. Construction plans and specifications define work required to achieve the required standards of uniformity and efficiency of water application according to industry standards

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Design a drainage, storage and treatment system

1. Regional geology and geography is investigated to predict sustainability of irrigation and storage.
2. Site investigations to assess depth of clay, depth of ground water, soil and water salinity, and structural or chemical impediments are used to determine the most cost effective storage system.
3. Predictions of leaching fractions and salt movements are documented, and soil amelioration and drainage management plans are developed.
4. The need for leachate interception and dewatering system is determined, and if required, construction specification prepared for interception and collection, water treatment, disposal, and reuse or recycle.
5. Drains and structures are capable of carrying the design water volumes and intensities according to enterprise standards.
6. Damage from water logging is minimised according to enterprise standards.
7. Hydrological calculations predict volumes and rates of surface run-off according to enterprise standards.

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Determine capital expense budget

1. Design calculations and decisions are documented and relevant information is communicated clearly through plans, specifications and manuals.
2. Design output is checked by a competent designer against enterprise objectives.
3. Materials requirements are determined and documented from plans and specifications.
4. Labour requirements are estimated, based upon documented work schedule with reasonable allowance for variances in work schedules.
5. Costing attributed to each component is based upon quoted information from suppliers, or sound analysis of individual elements.

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Determine operating expense budget

1. Operating expense budget indicates all expenses applicable to the completed irrigation system.

Completed
Date: