NTISthis.com

Evidence Guide: AUM8064B - Machine parts

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AUM8064B - Machine parts

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare machines for operation

  1. Work to be carried out is clarified and legislative and OHS requirements identified
  2. Resources list is correctly read and interpreted
  3. Appropriate hand/air tools are selected
  4. Machine controls and cutting tools/wheels are preset or adjusted to job specification
  5. Tools and machines are maintained in accordance with organisation policy
  6. Measuring equipment is calibrated to ensure accurate measurement within the tolerances specified
  7. Machine speed and feed controls are adjusted to the type of metal/alloy being machined
Work to be carried out is clarified and legislative and OHS requirements identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Resources list is correctly read and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate hand/air tools are selected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine controls and cutting tools/wheels are preset or adjusted to job specification

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and machines are maintained in accordance with organisation policy

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Measuring equipment is calibrated to ensure accurate measurement within the tolerances specified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine speed and feed controls are adjusted to the type of metal/alloy being machined

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine parts

  1. Parts are machined to specification using the appropriate machining process
  2. Parts are machined and checked for tolerances specified in the standard operating procedures and to minimise waste
  3. Identified faults and defects are rectified in accordance with work quality goals
  4. Machined parts are washed, inspected and dried to ensure they are cleaned and contain no waste in cavities or chambers
  5. Production schedule is maintained and recorded in accordance with organisation procedures
  6. Appropriate personnel are notified of the completion of tasks
Parts are machined to specification using the appropriate machining process

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Parts are machined and checked for tolerances specified in the standard operating procedures and to minimise waste

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identified faults and defects are rectified in accordance with work quality goals

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machined parts are washed, inspected and dried to ensure they are cleaned and contain no waste in cavities or chambers

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Production schedule is maintained and recorded in accordance with organisation procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate personnel are notified of the completion of tasks

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

compliance with relevant legislative, regulations, standards, codes of practice and establish safe practices and enterprise policies and procedures for managing personal work priorities

maintaining a working knowledge of current work systems and practices

working and communicating effectively and positively with others involved in the work

applying, within authority, the requirements of the job or work role in relation to:

achieving production goals

achieving work quality goals

responding positively to changing work requirements

contributing effectively to cost reduction initiatives

effectively applying problem solving techniques

modify activities to cater for variations in workplace context and environment

set up and use of machining equipment

machine parts to company standards

produce machined components / parts to meet the production schedule

limit the number of faulty parts to less than quality standards

produce work flow records

identify and mark faulty parts

employ company OH&S policy and procedures

apply manual handling techniques.

Context of and specific resources for assessment

assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using tools/equipment/machinery required for the production process without undue disruption to the production process

assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

assessment may be applied under project related conditions (real or simulated) and require evidence of process

assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Required Skills and Knowledge

This section describes the essential skills and knowledge and their level, required for this unit.

Required skills

speak clearly and directly in order to notify appropriate personnel of completed tasks

apply teamwork to a range of situations, including the calibration of measuring equipment

solve problems particularly in teams in order to meet performance indicators

show initiative in adapting to changing work conditions or contexts particularly when working across a variety of work areas

access, interpret and apply information on relevant organisation policies, procedures and instructions, particularly to ensure tools and machines are maintained to required standards

manage time when planning, preparing and organising work priorities

take responsibility for organising own work priorities.

Required knowledge

relevant Occupational Health and Safety and Environmental regulations and enterprise policies and procedures needed to carry out work in a manner which ensures the safety of people, equipment and the environment. The specific regulations will vary according to the area of operation

organisation technical work documentation covering procedures, specifications, schedules and work plans or equivalent

organisation quality system documentation covering instructions, procedures, performance indicators and review processes or equivalent

organisation cost minimisation/waste avoidance policies, procedures and practices

environmental protection requirements relating to the disposal of waste material

procedures for the safe and efficient set up and use of machining equipment

read and interpret work orders

organisation procedures for dealing with faulty parts

organisation quality standards

manual handling processes.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Legislative requirements may include:

Applicable legislation, regulations and codes of practice, including those related to:

anti-discrimination

award and enterprise agreements

confidentiality and privacy

duty of care

employee relations

environment protection

equal opportunity

industrial relations

relevant industry codes of practice.

OHS requirements may include:

Legislation and regulations, organisational safety policies and procedures and may include: the use of personal protective equipment and clothing, rescue services, fire fighting organisation and equipment, first aid equipment, hazard and risk control and elimination, systems covering the use of hazardous materials and substances and manual handling procedures including lifting and carrying.

Resources may include:

machines used include drills, lathes, millers, reamers, honers, threading, grinders, broaching, CNC robot controlled

micrometers, vernier gauges, calipers, feeler gauges.

Calibration:

refers to the tolerance accuracy of measurement. This is the degree of accuracy that the measuring equipment can achieve and when it was last checked against a recognised standard of accuracy. Users may maintain an internal standard of measure against which they periodically check the measuring equipment.

Work quality goals may include:

those established within a quality system and may include identification, minimisation and elimination of defects, product/component specifications, tolerances, inspection systems, packaging specifications and non-conforming parts or products.

Appropriatepersonnel may include:

clients and managers

supervisors

suppliers

team leaders

team members.