The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Obtain materials/parts for job
|
|
Materials/parts list is read and interpreted to establish requirements for the job Completed |
Evidence:
|
Parts are picked by matching part numbers and stacked in the appropriate bin/container Completed |
Evidence:
|
Parts and materials are transported to identified assembly points to ensure smooth, continuous production Completed |
Evidence:
|
Details of materials/parts received and used are recorded on the stock control system to provide an accurate record of inventory and stock movement Completed |
Evidence:
|
Select and use tools and equipment
|
|
Tools and equipment are selected to meet job requirements Completed |
Evidence:
|
Tools and equipment are checked to ensure they are in good working order Completed |
Evidence:
|
Load and unload parts onto jigs
|
|
Parts are matched to the jigging equipment on the basis of part numbers and codes Completed |
Evidence:
|
Parts correctly aligned with the predetermined points on the jig bed to minimise waste Completed |
Evidence:
|
Parts are securely clamped to prevent movement and distortion during the assembly operation as specified in the standard operating procedures Completed |
Evidence:
|
Select and use adhesives, sealants and solvents
|
|
Adhesives, sealants and solvents are selected and applied to meet the job requirements stated in the production schedule Completed |
Evidence:
|
Solvents are selected and used to remove excess adhesives and sealants to ensure finished product meets company quality control standards Completed |
Evidence:
|
Major spills are reported to the appropriate safety personnel and cleaned up in accordance with emergency procedures for hazardous materials Completed |
Evidence:
|
Select and use nuts, bolts, screws, washers and fasteners
|
|
Nuts, bolts, screws, washers and fasteners are identified and selected to meet the job requirements as stated in the materials list Completed |
Evidence:
|
Nuts, bolts, screws, washers and fasteners are fitted in the required number to the designated positions stated in the materials list and associated drawings Completed |
Evidence:
|
Company OH&S requirements are observed Completed |
Evidence:
|
Assemble components
|
|
Materials list and drawings are correctly read and interpreted Completed |
Evidence:
|
Parts/components are matched with the materials list for the particular component Completed |
Evidence:
|
Parts/components are positioned and secured as per the relevant drawings/instructions Completed |
Evidence:
|
Specified nuts, bolts and screws are tensioned to the specification stated in the standard operating procedures Completed |
Evidence:
|
Assemblies are inspected and checked for quality and specification Completed |
Evidence:
|
Identified faults are recorded, reported and rectified/reworked/scrapped in accordance with company procedures Completed |
Evidence:
|
Workflow and production schedule are recorded and maintained Completed |
Evidence:
|