NTISthis.com

Evidence Guide: AUMAKM002 - Produce computer-aided drawings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AUMAKM002 - Produce computer-aided drawings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for the job

  1. CAD project objectives and job order are identified and confirmed according to workplace procedures
  2. CAD requirements and processes are determined based on consideration of project and identified parameters
  3. Required computer software is selected and installed if required according to workplace procedures
  4. Files of digitised information relevant to the project are retrieved and converted if required
CAD project objectives and job order are identified and confirmed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

CAD requirements and processes are determined based on consideration of project and identified parameters

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required computer software is selected and installed if required according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Files of digitised information relevant to the project are retrieved and converted if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Gather measurements

  1. Measurements of components, sub-assemblies and products are identified and recorded
  2. Calculations of required dimensions and other drafting details based on measurements are made
Measurements of components, sub-assemblies and products are identified and recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Calculations of required dimensions and other drafting details based on measurements are made

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Critical information relevant to the CAD project is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare drawings

  1. Critical dimensions and data for the required drawings are established
  2. Preliminary sketches are prepared and reviewed with appropriate personnel
  3. CAD package is accessed using the necessary commands according to project objectives, operating instructions and workplace procedures
  4. D and 3D computer graphics systems are used to meet project objectives and specifications
Critical dimensions and data for the required drawings are established

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preliminary sketches are prepared and reviewed with appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

CAD package is accessed using the necessary commands according to project objectives, operating instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

D and 3D computer graphics systems are used to meet project objectives and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check and save drawing files

  1. Drawings are checked against project objectives and specifications
  2. CAD data files are stored according to workplace procedures and archiving requirements
Drawings are checked against project objectives and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

CAD data files are stored according to workplace procedures and archiving requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plot drawings

  1. Computer hardware is activated to scan, print or plot as required
  2. Retrieved information is plotted according to software instructions and task requirements
Computer hardware is activated to scan, print or plot as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Retrieved information is plotted according to software instructions and task requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for the job

1.1 CAD project objectives and job order are identified and confirmed according to workplace procedures

1.2 CAD requirements and processes are determined based on consideration of project and identified parameters

1.3 Required computer software is selected and installed if required according to workplace procedures

1.4 Files of digitised information relevant to the project are retrieved and converted if required

2. Gather measurements

2.1 Measurements of components, sub-assemblies and products are identified and recorded

2.2 Calculations of required dimensions and other drafting details based on measurements are made

2.3Critical information relevant to the CAD project is identified

3. Prepare drawings

3.1 Critical dimensions and data for the required drawings are established

3.2 Preliminary sketches are prepared and reviewed with appropriate personnel

3.3 CAD package is accessed using the necessary commands according to project objectives, operating instructions and workplace procedures

3.4 2D and 3D computer graphics systems are used to meet project objectives and specifications

4. Check and save drawing files

4.1 Drawings are checked against project objectives and specifications

4.2 CAD data files are stored according to workplace procedures and archiving requirements

5. Plot drawings

5.1 Computer hardware is activated to scan, print or plot as required

5.2 Retrieved information is plotted according to software instructions and task requirements

Required Skills and Knowledge

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for the job

1.1 CAD project objectives and job order are identified and confirmed according to workplace procedures

1.2 CAD requirements and processes are determined based on consideration of project and identified parameters

1.3 Required computer software is selected and installed if required according to workplace procedures

1.4 Files of digitised information relevant to the project are retrieved and converted if required

2. Gather measurements

2.1 Measurements of components, sub-assemblies and products are identified and recorded

2.2 Calculations of required dimensions and other drafting details based on measurements are made

2.3Critical information relevant to the CAD project is identified

3. Prepare drawings

3.1 Critical dimensions and data for the required drawings are established

3.2 Preliminary sketches are prepared and reviewed with appropriate personnel

3.3 CAD package is accessed using the necessary commands according to project objectives, operating instructions and workplace procedures

3.4 2D and 3D computer graphics systems are used to meet project objectives and specifications

4. Check and save drawing files

4.1 Drawings are checked against project objectives and specifications

4.2 CAD data files are stored according to workplace procedures and archiving requirements

5. Plot drawings

5.1 Computer hardware is activated to scan, print or plot as required

5.2 Retrieved information is plotted according to software instructions and task requirements

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Critical information must include:

drafting standards

measurements of components and sub-assemblies

system accuracy

workplace-accepted tolerances.