The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify faulty plant, tools, equipment and systems
|
|
Reported defects of plant, tool, equipment or system are investigated and faults identified Completed |
Evidence:
|
Repair instructions and plans are interpreted to identify required processes and materials Completed |
Evidence:
|
Plant, tool, equipment or system is inspected and operated to confirm nature of reported fault Completed |
Evidence:
|
Repair plan is developed with production and maintenance personnel Completed |
Evidence:
|
Remove faulty plant, tools, equipment and systems
|
|
Identified faulty plant, tool, equipment or system is removed according to the repair plan and in line with workplace procedures Completed |
Evidence:
|
Where required, faulty plant, tool, equipment or system is temporarily replaced Completed |
Evidence:
|
Diagnose faults
|
|
Faults are located, causes identified, and repair strategy is developed that addresses fault-rectification requirements Completed |
Evidence:
|
Information from maintenance records, test results and fault diagnosis guides is used to assist in fault identification Completed |
Evidence:
|
Specialist advice is obtained, where required, to confirm rectification strategy Completed |
Evidence:
|
Repair faults
|
|
Faulty plant, tool, equipment or system is dismantled according to the repair strategy Completed |
Evidence:
|
Component parts are assessed and repair strategy is developed according to workplace procedures Completed |
Evidence:
|
Component parts are repaired, modified or replaced Completed |
Evidence:
|
Parts requiring specialist repair are tagged and repair instructions documented according to workplace procedures Completed |
Evidence:
|
Repaired plant, tools and equipment are re-assembled Completed |
Evidence:
|
Re-install plant, tools, equipment and systems
|
|
Re-installation plan for plant, tool, equipment or system is confirmed with relevant personnel Completed |
Evidence:
|
New or repaired plant, tool, equipment or system is re-installed and checked for compliance and correct operation Completed |
Evidence:
|
Calibrate and adjust plant, equipment and systems
|
|
New or repaired plant, tool, equipment or system is calibrated, adjusted and tested Completed |
Evidence:
|
Details of the repair, re-commissioning, testing and serviceability are documented according to workplace procedures Completed |
Evidence:
|