NTISthis.com

Evidence Guide: AUMFTA002 - Perform die coating

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AUMFTA002 - Perform die coating

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare

  1. Job instructions and quality requirements are identified and confirmed with appropriate personnel
  2. Tools and equipment required for the job are selected and checked for faults and correct operation
  3. Materials required to complete the job are identified and prepared
Job instructions and quality requirements are identified and confirmed with appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment required for the job are selected and checked for faults and correct operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required to complete the job are identified and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Disassemble and inspect dies

  1. Die is safely located in the coating area
  2. Die coating insulation materials are inspected for wear, and removed if required
  3. Dies are inspected and analysed for defects, and identified defects are rectified according to workplace procedures
  4. Dies are tested to ensure rectification has eliminated the fault, and adjustments are made if required
Die is safely located in the coating area

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Die coating insulation materials are inspected for wear, and removed if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dies are inspected and analysed for defects, and identified defects are rectified according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dies are tested to ensure rectification has eliminated the fault, and adjustments are made if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Coat and assemble dies

  1. Die coating insulation material is selected and prepared according to workplace procedures
  2. Die is cleaned in preparation for coating and heated according to workplace and equipment manufacturer recommendations and work health and safety (WHS) requirements
  3. Die coating insulation material is applied to the die, and die is assembled and checked in preparation for pressing according to workplace and equipment manufacturer recommendations
  4. Die is returned to production sequence
Die coating insulation material is selected and prepared according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Die is cleaned in preparation for coating and heated according to workplace and equipment manufacturer recommendations and work health and safety (WHS) requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Die coating insulation material is applied to the die, and die is assembled and checked in preparation for pressing according to workplace and equipment manufacturer recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Die is returned to production sequence

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  2. Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures
  3. Documentation is completed according to workplace procedures
Work area is cleaned, and materials disposed of or recycled according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Documentation is completed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Job instructions and quality requirements are identified and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

2. Disassemble and inspect dies

2.1 Die is safely located in the coating area

2.2 Die coating insulation materials are inspected for wear, and removed if required

2.3 Dies are inspected and analysed for defects, and identified defects are rectified according to workplace procedures

2.4 Dies are tested to ensure rectification has eliminated the fault, and adjustments are made if required

3. Coat and assemble dies

3.1 Die coating insulation material is selected and prepared according to workplace procedures

3.2 Die is cleaned in preparation for coating and heated according to workplace and equipment manufacturer recommendations and work health and safety (WHS) requirements

3.3 Die coating insulation material is applied to the die, and die is assembled and checked in preparation for pressing according to workplace and equipment manufacturer recommendations

3.4 Die is returned to production sequence

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

4.3 Documentation is completed according to workplace procedures

Required Skills and Knowledge

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Job instructions and quality requirements are identified and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

2. Disassemble and inspect dies

2.1 Die is safely located in the coating area

2.2 Die coating insulation materials are inspected for wear, and removed if required

2.3 Dies are inspected and analysed for defects, and identified defects are rectified according to workplace procedures

2.4 Dies are tested to ensure rectification has eliminated the fault, and adjustments are made if required

3. Coat and assemble dies

3.1 Die coating insulation material is selected and prepared according to workplace procedures

3.2 Die is cleaned in preparation for coating and heated according to workplace and equipment manufacturer recommendations and work health and safety (WHS) requirements

3.3 Die coating insulation material is applied to the die, and die is assembled and checked in preparation for pressing according to workplace and equipment manufacturer recommendations

3.4 Die is returned to production sequence

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

4.3 Documentation is completed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

equipment use, maintenance and storage

recording and reporting

WHS requirements relating to die coating

workplace quality and continuous improvement programs.