NTISthis.com

Evidence Guide: AUMFTA003 - Set and adjust automotive production machine tools

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AUMFTA003 - Set and adjust automotive production machine tools

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare

  1. Job instructions and quality requirements are located and confirmed with appropriate personnel
  2. Tools and equipment required for the job are selected and checked for faults and correct operation
  3. Materials required to complete the job are identified and prepared
Job instructions and quality requirements are located and confirmed with appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment required for the job are selected and checked for faults and correct operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required to complete the job are identified and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and check machining tools

  1. Machining tools are selected according to the machine’s maintenance schedule and specifications
  2. Machining tools are inspected and tested for compliance with specifications
  3. Out-of-specification tools are processed for repair or disposal according to workplace procedures
  4. Machining tools are cleaned, prepared for use, and protected for transit
Machining tools are selected according to the machine’s maintenance schedule and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machining tools are inspected and tested for compliance with specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Out-of-specification tools are processed for repair or disposal according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machining tools are cleaned, prepared for use, and protected for transit

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and replace machining tools

  1. Required location for the machining tools is checked and confirmed against machine specifications
  2. Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work
  3. Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications
  4. Machine safety guards are checked for correct fitting according to machine specifications
  5. Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked
Required location for the machining tools is checked and confirmed against machine specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine safety guards are checked for correct fitting according to machine specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain machining tools and stock levels

  1. Machining tools are maintained according to workplace procedures
  2. Stock levels of machining tools are reviewed and action taken to avoid stock-out situations
  3. Stock levels of consumables are maintained to support continuity of operations
Machining tools are maintained according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Stock levels of machining tools are reviewed and action taken to avoid stock-out situations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Stock levels of consumables are maintained to support continuity of operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  2. Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures
  3. Workplace documentation is completed according to workplace procedures
Work area is cleaned, and materials disposed of or recycled according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Job instructions and quality requirements are located and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

2. Select and check machining tools

2.1 Machining tools are selected according to the machine’s maintenance schedule and specifications

2.2 Machining tools are inspected and tested for compliance with specifications

2.3 Out-of-specification tools are processed for repair or disposal according to workplace procedures

2.4 Machining tools are cleaned, prepared for use, and protected for transit

3. Remove and replace machining tools

3.1 Required location for the machining tools is checked and confirmed against machine specifications

3.2 Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work

3.3 Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications

3.4 Machine safety guards are checked for correct fitting according to machine specifications

3.5 Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked

4. Maintain machining tools and stock levels

4.1 Machining tools are maintained according to workplace procedures

4.2 Stock levels of machining tools are reviewed and action taken to avoid stock-out situations

4.3 Stock levels of consumables are maintained to support continuity of operations

5. Complete work processes

5.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

5.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

5.3 Workplace documentation is completed according to workplace procedures

Required Skills and Knowledge

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Job instructions and quality requirements are located and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

2. Select and check machining tools

2.1 Machining tools are selected according to the machine’s maintenance schedule and specifications

2.2 Machining tools are inspected and tested for compliance with specifications

2.3 Out-of-specification tools are processed for repair or disposal according to workplace procedures

2.4 Machining tools are cleaned, prepared for use, and protected for transit

3. Remove and replace machining tools

3.1 Required location for the machining tools is checked and confirmed against machine specifications

3.2 Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work

3.3 Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications

3.4 Machine safety guards are checked for correct fitting according to machine specifications

3.5 Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked

4. Maintain machining tools and stock levels

4.1 Machining tools are maintained according to workplace procedures

4.2 Stock levels of machining tools are reviewed and action taken to avoid stock-out situations

4.3 Stock levels of consumables are maintained to support continuity of operations

5. Complete work processes

5.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

5.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

5.3 Workplace documentation is completed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

continuous improvement programs

recording and reporting

use of tools and equipment

WHS requirements relating to setting and adjusting production machine tools

workplace quality standards for setting and adjusting production machine tools.