NTISthis.com

Evidence Guide: AUMGTP001 - Finish and paint vehicle body and part surfaces

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AUMGTP001 - Finish and paint vehicle body and part surfaces

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare for work processes

  1. Work orders, instructions, reports and quality requirements are obtained and confirmed
  2. Spray booths, and hand and air tools are selected and checked for correct operation and faults are rectified or reported
  3. Paint materials are identified and selected from job specifications
Work orders, instructions, reports and quality requirements are obtained and confirmed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Spray booths, and hand and air tools are selected and checked for correct operation and faults are rectified or reported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Paint materials are identified and selected from job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare surface for painting

  1. Workplace procedures are identified and followed
  2. Surfaces are cleaned, degreased and prepared according to workplace procedures
  3. Final finishing is performed on components and panel surfaces to workplace standards
  4. Reject components and surfaces are identified, recorded and reported for rework or scrap according to workplace procedures
Workplace procedures are identified and followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surfaces are cleaned, degreased and prepared according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Final finishing is performed on components and panel surfaces to workplace standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Reject components and surfaces are identified, recorded and reported for rework or scrap according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prime painted surfaces

  1. Paint materials are mixed and applied according to workplace procedures
  2. Painted surfaces are finished to workplace quality standard
  3. Reject paintwork is identified, recorded and reworked according to workplace procedures
Paint materials are mixed and applied according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Painted surfaces are finished to workplace quality standard

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Reject paintwork is identified, recorded and reworked according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  2. Tools and equipment are cleaned, checked and stored according to workplace procedures
  3. Faulty equipment is tagged and reported to supervisor
  4. Workplace documentation is completed according to workplace procedures
Work area is cleaned, and materials disposed of or recycled according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty equipment is tagged and reported to supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare for work processes

1.1 Work orders, instructions, reports and quality requirements are obtained and confirmed

1.2 Spray booths, and hand and air tools are selected and checked for correct operation and faults are rectified or reported

1.3 Paint materials are identified and selected from job specifications

2. Prepare surface for painting

2.1 Workplace procedures are identified and followed

2.2 Surfaces are cleaned, degreased and prepared according to workplace procedures

2.3 Final finishing is performed on components and panel surfaces to workplace standards

2.4 Reject components and surfaces are identified, recorded and reported for rework or scrap according to workplace procedures

3. Prime painted surfaces

3.1 Paint materials are mixed and applied according to workplace procedures

3.2 Painted surfaces are finished to workplace quality standard

3.3 Reject paintwork is identified, recorded and reworked according to workplace procedures

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked and stored according to workplace procedures

4.3 Faulty equipment is tagged and reported to supervisor

4.4 Workplace documentation is completed according to workplace procedures

Required Skills and Knowledge

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare for work processes

1.1 Work orders, instructions, reports and quality requirements are obtained and confirmed

1.2 Spray booths, and hand and air tools are selected and checked for correct operation and faults are rectified or reported

1.3 Paint materials are identified and selected from job specifications

2. Prepare surface for painting

2.1 Workplace procedures are identified and followed

2.2 Surfaces are cleaned, degreased and prepared according to workplace procedures

2.3 Final finishing is performed on components and panel surfaces to workplace standards

2.4 Reject components and surfaces are identified, recorded and reported for rework or scrap according to workplace procedures

3. Prime painted surfaces

3.1 Paint materials are mixed and applied according to workplace procedures

3.2 Painted surfaces are finished to workplace quality standard

3.3 Reject paintwork is identified, recorded and reworked according to workplace procedures

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked and stored according to workplace procedures

4.3 Faulty equipment is tagged and reported to supervisor

4.4 Workplace documentation is completed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

original equipment manufacturer (OEM) vehicle specifications

workplace quality guidelines for finishing vehicle body and part surfaces

procedures for recording and reporting finishing processes of vehicle body and part surfaces

workplace waste disposal, recycling and re-use guidelines

work health and safety (WHS) requirements for finishing vehicle body and part surfaces.

Final finishing must include:

hand and mechanical sanding

paint edge feathering.