NTISthis.com

Evidence Guide: AUMGTS001 - Prepare materials for fabrication using jigs and fixtures

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AUMGTS001 - Prepare materials for fabrication using jigs and fixtures

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare

  1. Hand tools, equipment and resources are selected and inspected, and faults are repaired or reported
  2. Appropriate lifting equipment is selected and used according to workplace procedures
  3. Work information and working drawings are identified and confirmed
Hand tools, equipment and resources are selected and inspected, and faults are repaired or reported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate lifting equipment is selected and used according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work information and working drawings are identified and confirmed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and mark out materials

  1. Work health and safety (WHS) requirements and workplace procedures are identified and followed
  2. Materials are selected, marked out and prepared according to job specifications
  3. Defective materials are set aside for scrap or rework
Work health and safety (WHS) requirements and workplace procedures are identified and followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are selected, marked out and prepared according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defective materials are set aside for scrap or rework

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Load and unload materials onto jig or fixture

  1. Material and parts are positioned and secured in jig to prevent movement
  2. Materials and parts are loaded and unloaded into jig according to WHS requirements and workplace procedures
Material and parts are positioned and secured in jig to prevent movement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials and parts are loaded and unloaded into jig according to WHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate parts

  1. Materials are shaped to fit jig and checked against job specifications
  2. Materials positioned in jig are bolted or welded according to job specification
  3. Fabrication process is completed according to workplace procedures
  4. Fabricated components are removed from jig and checked for compliance, and faulty components are returned for rework
Materials are shaped to fit jig and checked against job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials positioned in jig are bolted or welded according to job specification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabrication process is completed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricated components are removed from jig and checked for compliance, and faulty components are returned for rework

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Work area, jigs, tools and equipment are cleaned, maintained and inspected according to workplace procedures
  2. Faulty equipment is identified, tagged and reported
  3. Work sheets and production schedule are completed and given to appropriate personnel
Work area, jigs, tools and equipment are cleaned, maintained and inspected according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty equipment is identified, tagged and reported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sheets and production schedule are completed and given to appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Hand tools, equipment and resources are selected and inspected, and faults are repaired or reported

1.2 Appropriate lifting equipment is selected and used according to workplace procedures

1.3 Work information and working drawings are identified and confirmed

2. Select and mark out materials

2.1 Work health and safety (WHS) requirements and workplace procedures are identified and followed

2.2 Materials are selected, marked out and prepared according to job specifications

2.3 Defective materials are set aside for scrap or rework

3. Load and unload materials onto jig or fixture

3.1 Material and parts are positioned and secured in jig to prevent movement

3.2 Materials and parts are loaded and unloaded into jig according to WHS requirements and workplace procedures

4. Fabricate parts

4.1 Materials are shaped to fit jig and checked against job specifications

4.2 Materials positioned in jig are bolted or welded according to job specification

4.3 Fabrication process is completed according to workplace procedures

4.4 Fabricated components are removed from jig and checked for compliance, and faulty components are returned for rework

5. Complete work processes

5.1 Work area, jigs, tools and equipment are cleaned, maintained and inspected according to workplace procedures

5.2 Faulty equipment is identified, tagged and reported

4.3 Work sheets and production schedule are completed and given to appropriate personnel

Required Skills and Knowledge

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Hand tools, equipment and resources are selected and inspected, and faults are repaired or reported

1.2 Appropriate lifting equipment is selected and used according to workplace procedures

1.3 Work information and working drawings are identified and confirmed

2. Select and mark out materials

2.1 Work health and safety (WHS) requirements and workplace procedures are identified and followed

2.2 Materials are selected, marked out and prepared according to job specifications

2.3 Defective materials are set aside for scrap or rework

3. Load and unload materials onto jig or fixture

3.1 Material and parts are positioned and secured in jig to prevent movement

3.2 Materials and parts are loaded and unloaded into jig according to WHS requirements and workplace procedures

4. Fabricate parts

4.1 Materials are shaped to fit jig and checked against job specifications

4.2 Materials positioned in jig are bolted or welded according to job specification

4.3 Fabrication process is completed according to workplace procedures

4.4 Fabricated components are removed from jig and checked for compliance, and faulty components are returned for rework

5. Complete work processes

5.1 Work area, jigs, tools and equipment are cleaned, maintained and inspected according to workplace procedures

5.2 Faulty equipment is identified, tagged and reported

4.3 Work sheets and production schedule are completed and given to appropriate personnel

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Resources must include:

jigs and fixtures

job specifications

lifting equipment

pre-formed parts

production materials and drawings

securing processes:

bolts

clamps

metal pins

work plans

workplace procedures.

Workplace procedures must include:

procedures for recording and reporting the preparation of materials for fabrication using jigs and fixtures

use of tools and equipment for preparing materials for fabrication using jigs and fixtures

WHS requirements for preparing materials for fabrication using jigs and fixtures

workplace quality standards relevant to preparing materials for fabrication using jigs and fixtures.