NTISthis.com

Evidence Guide: AUMGTT001 - Apply trim to vehicle components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AUMGTT001 - Apply trim to vehicle components

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare

  1. Work orders, job specifications and working drawings are identified, interpreted and confirmed
  2. Trim materials, tools and equipment are selected and inspected, and faults repaired or reported
Work orders, job specifications and working drawings are identified, interpreted and confirmed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Trim materials, tools and equipment are selected and inspected, and faults repaired or reported

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Match materials

  1. Trim materials are matched, measured and cut according to job specifications and workplace procedures
  2. Material characteristics are identified and selected for use
  3. Attaching or bonding informationis identified and interpreted from appropriate sources
Trim materials are matched, measured and cut according to job specifications and workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Material characteristics are identified and selected for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Attaching or bonding informationis identified and interpreted from appropriate sources

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Attach materials

  1. Workplace procedures are identified and followed
  2. Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications
  3. Trim materials are attached to components by approved methods
Workplace procedures are identified and followed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Trim materials are attached to components by approved methods

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Tools and equipment are cleaned, inspected and stored according to workplace procedures
  2. Faulty equipment is identified, reported and tagged
  3. Work areas are cleaned, and unused materials stored
  4. Waste materials are removed and disposed of or recycled according to workplace environmental procedures
  5. Work sheets are completed according to workplace procedures
Tools and equipment are cleaned, inspected and stored according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Faulty equipment is identified, reported and tagged

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work areas are cleaned, and unused materials stored

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste materials are removed and disposed of or recycled according to workplace environmental procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work sheets are completed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work orders, job specifications and working drawings are identified, interpreted and confirmed

1.2 Trim materials, tools and equipment are selected and inspected, and faults repaired or reported

2. Match materials

2.1 Trim materials are matched, measured and cut according to job specifications and workplace procedures

2.2 Material characteristics are identified and selected for use

2.3 Attaching or bonding informationis identified and interpreted from appropriate sources

3. Attach materials

3.1 Workplace procedures are identified and followed

3.2 Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications

3.3 Trim materials are attached to components by approved methods

4. Complete work processes

4.1 Tools and equipment are cleaned, inspected and stored according to workplace procedures

4.2 Faulty equipment is identified, reported and tagged

4.3 Work areas are cleaned, and unused materials stored

4.4 Waste materials are removed and disposed of or recycled according to workplace environmental procedures

4.5 Work sheets are completed according to workplace procedures

Required Skills and Knowledge

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work orders, job specifications and working drawings are identified, interpreted and confirmed

1.2 Trim materials, tools and equipment are selected and inspected, and faults repaired or reported

2. Match materials

2.1 Trim materials are matched, measured and cut according to job specifications and workplace procedures

2.2 Material characteristics are identified and selected for use

2.3 Attaching or bonding informationis identified and interpreted from appropriate sources

3. Attach materials

3.1 Workplace procedures are identified and followed

3.2 Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications

3.3 Trim materials are attached to components by approved methods

4. Complete work processes

4.1 Tools and equipment are cleaned, inspected and stored according to workplace procedures

4.2 Faulty equipment is identified, reported and tagged

4.3 Work areas are cleaned, and unused materials stored

4.4 Waste materials are removed and disposed of or recycled according to workplace environmental procedures

4.5 Work sheets are completed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Appropriate sources must include:

customer requirements

material and product specifications.

Workplace procedures must include:

procedures for recording and reporting the application of trim to vehicle components

use of tools and equipment for applying trim to vehicle components

WHS requirements for applying trim to vehicle components

workplace quality standards relevant to applying trim to vehicle components.