The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare
|
|
Activities are carried out according to OHS and organisation requirements Completed |
Evidence:
|
Work instructions, including relevant inspection reports and forms and quality requirements are obtained, confirmed with appropriate personnel and applied Completed |
Evidence:
|
Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability and any faults are rectified or reported prior to commencement Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use Completed |
Evidence:
|
Select and check
|
|
Machining tool is correctly selected in accordance with the maintenance schedule and machine specifications Completed |
Evidence:
|
Machining tool is inspected and tested for compliance with specification Completed |
Evidence:
|
Out of specification tools are processed for repair or disposal in accordance with organisation procedures Completed |
Evidence:
|
Machining tool is cleaned, prepared for use and protected during transit Completed |
Evidence:
|
Remove and replace
|
|
Required location for the machining tools are checked and confirmed against machine specification Completed |
Evidence:
|
Machine is made safe prior to commencing work in accordance with OHS requirements Completed |
Evidence:
|
Housings/guards are removed in accordance with machine specifications Completed |
Evidence:
|
Machining tools are located and removed Completed |
Evidence:
|
Replacement machining tools are installed and set to machine specification Completed |
Evidence:
|
Housings/guards are replaced and restored in accordance with machine specifications Completed |
Evidence:
|
Test runs are conducted and sample products are checked to certify the new machining tool Completed |
Evidence:
|
Documentation is completed outlining the detail of the replacement in accordance with organisation requirements Completed |
Evidence:
|
Maintain machining tool stocks
|
|
Machining tools are processed for maintenance in accordance with organisation procedures Completed |
Evidence:
|
Stock levels of machining tools are reviewed and action taken to avoid stock out situations Completed |
Evidence:
|
Stock levels of peripherals and consumables are maintained to support continuity of operations Completed |
Evidence:
|
Work area is cleared and materials disposed of, reused or recycled in accordance with organisation requirements and cost reduction initiatives Completed |
Evidence:
|
Tools and equipment are cleaned, checked, maintained and stored in accordance with organisation requirements Completed |
Evidence:
|