NTISthis.com

Evidence Guide: AURB328267A - Service and repair bicycle frames

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURB328267A - Service and repair bicycle frames

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Confirm customer requirements and intended use of the unit in accordance with workplace procedures
  2. Identify and check bicycle frame service and repair requirements and specifications
  3. Check tooling and equipment for availability, conformity with specifications and safe condition
  4. Prepare work area and set up equipment and materials
Confirm customer requirements and intended use of the unit in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify and check bicycle frame service and repair requirements and specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check tooling and equipment for availability, conformity with specifications and safe condition

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare work area and set up equipment and materials

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspect bicycle frame

  1. Inspect bicycle frame for faults, wear or damage using visual, aural and tactile inspections and measurements
  2. Compare conditions found with bicycle frame specifications and customer requirements
  3. Identify service and repair options for bicycle frame
  4. Document and cost service and repair items for customer approval in accordance with workplace procedures
  5. Obtain customer approval for work to be undertaken
Inspect bicycle frame for faults, wear or damage using visual, aural and tactile inspections and measurements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Compare conditions found with bicycle frame specifications and customer requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify service and repair options for bicycle frame

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Document and cost service and repair items for customer approval in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Obtain customer approval for work to be undertaken

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare for service and repair of bicycle frame

  1. Plan service and repair sequence and determine availability of tooling and equipment
  2. Ensure service and repair sequence plan includes post-service testing and checking process
  3. Prepare list of parts and materials and determine availability
  4. Identify need for additional persons to assist in repair process and make arrangements
  5. Select and check tooling and equipment to meet job requirements
Plan service and repair sequence and determine availability of tooling and equipment

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Ensure service and repair sequence plan includes post-service testing and checking process

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare list of parts and materials and determine availability

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify need for additional persons to assist in repair process and make arrangements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Select and check tooling and equipment to meet job requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service and repair bicycle frame

  1. Perform service and repair operations for bicycle frame according to plan
  2. Use personal safety equipment and take precautions to protect others in the workplace
  3. Use and maintain tooling and equipment in accordance with occupational health and safety (OHS) requirements
  4. Check customer requirements and bicycle frame specifications in accordance with workplace procedures
Perform service and repair operations for bicycle frame according to plan

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Use personal safety equipment and take precautions to protect others in the workplace

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Use and maintain tooling and equipment in accordance with occupational health and safety (OHS) requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check customer requirements and bicycle frame specifications in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Test bicycle frame

  1. Operate bicycle through its full range, noting test results, including non-conformity
  2. Check bicycle frame, complete adjustments and prepare unit for delivery
  3. Clean and store portable tooling and equipment in approved designated areas
  4. Complete workplace records, customer file and warranty information as required by enterprise
Operate bicycle through its full range, noting test results, including non-conformity

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check bicycle frame, complete adjustments and prepare unit for delivery

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Clean and store portable tooling and equipment in approved designated areas

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete workplace records, customer file and warranty information as required by enterprise

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

observe safety procedures and requirements

communicate effectively with others involved in or affected by the work

select methods and techniques appropriate to the circumstances

complete preparatory activity in a systematic manner

inspect a range of bicycle frames and components and accurately identify required service and repair options

service and repair a range of bicycle frames to manufacturer/ component supplier specifications

test bicycle frames to manufacturer/component supplier specifications.

Context of, and specific resources for assessment

The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment.

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.

Assessment is to comply with relevant regulatory requirements, including specified Australian standards.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

The following resources should be made available:

a range of bicycle frame configurations

material relevant to servicing and repairing bicycle frames

equipment and hand and power tooling appropriate to servicing and repairing bicycle frames

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge.

Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.

Guidance information for assessment

Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed.

Required Skills and Knowledge

Required skills

Required skills include:

technical skills to the level required to use workplace technology related to servicing, repairing and testing of bicycle frames

communication skills to the level required to confirm work requirements and specifications, to communicate effectively regarding work requirements with supervisor, other workers and customers, to report work outcomes and problems, and to relate to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities

literacy skills to the level required to understand information related to work orders, including common industry terminology, plans and safety procedures, prepare reports, complete records and interpret technical information and specifications

numeracy skills to the level required to correctly count and measure to determine bicycle frame condition and operation

problem-solving skills to the level required to plan and organise activities and establish diagnostic processes which identify methods of servicing, repairing and testing bicycle frames

team skills to the level required to work effectively and cooperatively with others to optimise workflow and productivity

Required knowledge

Required knowledge includes:

purpose and requirements of bicycle frame systems and their relationship to braking, wheels, drivetrain and steering system

classification of bicycle frames and identification of system components

material used in bicycle frames

application of frame design principles

frame service, repair and testing procedures and techniques

selection, checking and use of tooling and equipment

manufacturer and/or component supplier specifications

applicable commonwealth, state or territory legislation, regulations, standards and codes of practice, including OHS, personal safety and environment, relevant to servicing and repairing bicycle frames

organisational policies and procedures, including quality requirements, reporting and recording procedures, and work organisation and planning processes related to servicing and repairing bicycle frames

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Bicycle frames

Bicycle frames may include:

all-terrain, touring, racing, recumbent and BMX bicycles

seat pillars and fasteners

bottom brackets, cartridge, cup, loose and caged bearings

left and right hand thread types

composite material

painted, anodised, natural state and polished surface finishes

Servicing and repair methods

Servicing and repair methods are to include:

on- and off-site servicing

repair, replacement and refinishing of frame components

welding, brazing and bonding processes

communicating with customers

documenting and reporting on service

Tooling and equipment

Tooling and equipment may include:

specific service and repair and general workshop equipment and tooling

welding, brazing and bonding equipment and material

floor stands, workbench and air tooling

Materials

Materials may include:

spare parts

welding consumables

cleaning materials

Information/documents

Information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets (MSDS), diagrams or sketches

safe work procedures related to bicycle frames

regulatory/legislative requirements pertaining to bicycle safety

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian standards

OHS requirements

OHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

hazard and risk control

elimination of hazardous materials and substances

manual handling, including shifting, lifting and carrying

emergency procedures

Legislative requirements

Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:

award and enterprise agreements

industrial relations

Australian standards

Australian Design Rules

confidentiality and privacy

OHS

the environment

equal opportunity

anti-discrimination

relevant industry codes of practice

duty of care

Environmental requirements

Environmental requirements may include:

waste management

noise

dust

clean-up management

Quality requirements

Quality requirements may include:

regulations, including Australian standards

internal organisational quality policies and procedures

enterprise operations and procedures

Organisational policies and procedures

Organisational policies and procedures may include:

quality policies and procedures, including Australian standards

OHS, sustainability, environment, equal opportunity and anti-discrimination

manufacturer specifications and industry codes of practice

safe work procedures

reporting and recording procedures