NTISthis.com

Evidence Guide: AURBTA002 - Adjust bicycles and components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURBTA002 - Adjust bicycles and components

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to adjust bicycle

  1. Job requirements are determined from workplace instructions and bicycle to be adjusted is identified
  2. Hazards associated with the work are identified and reported to workplace supervisor
  3. Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures
  4. Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained
Job requirements are determined from workplace instructions and bicycle to be adjusted is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out adjustments to bicycle components

  1. Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed
  2. Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems
  3. Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures
Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to adjust bicycle

  1. Job requirements are determined from workplace instructions and bicycle to be adjusted is identified
  2. Hazards associated with the work are identified and reported to workplace supervisor
  3. Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures
  4. Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained
Job requirements are determined from workplace instructions and bicycle to be adjusted is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out adjustments to bicycle components

  1. Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed
  2. Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems
  3. Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures
Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to adjust bicycle

1.1 Job requirements are determined from workplace instructions and bicycle to be adjusted is identified

1.2 Hazards associated with the work are identified and reported to workplace supervisor

1.3 Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures

1.4 Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained

2. Carry out adjustments to bicycle components

2.1 Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed

2.2 Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems

2.3 Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to adjust bicycle

1.1 Job requirements are determined from workplace instructions and bicycle to be adjusted is identified

1.2 Hazards associated with the work are identified and reported to workplace supervisor

1.3 Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures

1.4 Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained

2. Carry out adjustments to bicycle components

2.1 Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed

2.2 Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems

2.3 Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

adjust the following components on three different bicycles:

brakes

suspension

chain tension

seat

handlebars and steering

gears.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to adjusting bicycles, including procedures for manually handling bicycles

environmental requirements, including procedures for trapping, storing and disposing of waste grease and oils

key bicycle terminology

techniques and procedures for adjusting bicycles, including:

bicycle measuring techniques

bicycle and adjustment procedures for components specified in the performance evidence

bicycle post-adjustment inspection and testing procedures

types and use of specialist tools and equipment to adjust bicycles

assembly procedures for bicycles and components.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for manually handling bicycles

environmental requirements, including procedures for trapping, storing and disposing of waste grease and oils.