NTISthis.com

Evidence Guide: AURE218708A - Carry out repairs to single electrical circuits

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURE218708A - Carry out repairs to single electrical circuits

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Work instructions are used to determine job requirements, including method, process and equipment
  2. Job specifications are read and interpreted
  3. OHS requirements, including personal safety needs, are observed throughout the work
  4. Equipment and tooling are identified and checked for safe and effective operation
  5. Procedures are determined to minimise task time
Work instructions are used to determine job requirements, including method, process and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Job specifications are read and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

OHS requirements, including personal safety needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and tooling are identified and checked for safe and effective operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures are determined to minimise task time

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test circuits/ components and identify faults

  1. Correct information is accessed and interpreted from manufacturer/component supplier specifications
  2. Tests are carried out to determine faults using tooling and techniques
  3. Circuits/components are tested without causing damage to component or system
  4. Faults are identified and preferred repair action determined
  5. Tests are carried out according to industry regulations/ guidelines, OHS, legislation and enterprise procedures/ policies
Correct information is accessed and interpreted from manufacturer/component supplier specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tests are carried out to determine faults using tooling and techniques

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/components are tested without causing damage to component or system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are identified and preferred repair action determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tests are carried out according to industry regulations/ guidelines, OHS, legislation and enterprise procedures/ policies

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete repairs to circuit wiring

  1. Correct information is accessed and interpreted from manufacturer/component supplier specifications
  2. Repairs, component replacement and adjustments are carried out using tooling, techniques and materials
  3. Repairs to circuit wiring are completed without causing damage to component or system
  4. Repairs are carried out according to industry regulations/ guidelines OHS, statutory and enterprise procedures/ policies
Correct information is accessed and interpreted from manufacturer/component supplier specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs, component replacement and adjustments are carried out using tooling, techniques and materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs to circuit wiring are completed without causing damage to component or system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs are carried out according to industry regulations/ guidelines OHS, statutory and enterprise procedures/ policies

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up work area and maintain equipment

  1. Material that can be reused is collected and stored
  2. Waste and scrap is removed following workplace procedures
  3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
  4. Unserviceable equipment is tagged and faults identified in accordance with workplace requirements
  5. Operator maintenance is completed in accordance with manufacturer/component supplier specifications and site procedures
  6. Tooling and equipment is maintained in accordance with workplace procedures
Material that can be reused is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap is removed following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is tagged and faults identified in accordance with workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operator maintenance is completed in accordance with manufacturer/component supplier specifications and site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tooling and equipment is maintained in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:

observing safety procedures and requirements

communicating effectively with others involved in or affected by the work

selecting methods and techniques appropriate to the circumstances

completing preparatory activity in a systematic manner.

Carry out repairs to electrical circuits covering open and short circuits and earthing, ensuring:

safe and correct use of tooling and equipment

isolating power supply to components

testing and identification of faults

electrical connections, including crimping and soldering to specification

electrical repairs to specification.

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite.

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.

Assessment is to comply with regulatory requirements, including Australian Standards.

The following resources should be made available:

workplace location or simulated workplace

material relevant to repairing electrical circuits

equipment, hand and power tooling appropriate to repairing electrical circuits

activities covering mandatory task requirements

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of AUR05 Automotive Industry Retail, Service and Repair Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and must reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able to be under the particular circumstance, and is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment

Required Skills and Knowledge

Required skills

collect, organise and understand information related to work orders, plans and safety procedures for circuit and component testing, and repair/component replacement

technical literacy and communication skills sufficient to interpret and apply common industry terminology, and interpret technical information and specifications

research and interpretive skills to locate, interpret and apply operational and safety information

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

plain English literacy and communication skills in relation to dealing with others involved in the work

questioning and active listening skills, for example when obtaining information on electrical repairs/replacement procedures

plan and organise activities, including preparation and layout of worksite and obtaining of equipment and material to avoid backtracking or workflow interruptions

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

use mathematical ideas and techniques to correctly complete tests and measurements to determine electrical circuit/ component repair/replacement requirements

use pre-checking and inspection techniques to anticipate planning and scheduling problems and avoid wastage of time and material

manipulative and dexterity skills to perform electrical testing and repair/replacement procedures

problem-solving skills for a range of procedural issues

use workplace technology related to repairing electrical circuits, including use of specialist tooling, measuring equipment, computerised technology and communication devices and the reporting/documenting of results

Required knowledge

A working knowledge of:

OHS and environmental regulations/requirements, equipment, material and personal safety requirements

electrical principles (including current, voltage, resistance, conductors, insulators)

circuit types, diagrams, symbols and faults

electrical measuring and testing procedures

repair procedures

procedures to avoid damage to electronic systems/ components

enterprise quality procedures

work organisation and planning processes

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Repairing electrical circuits

Repairing electrical circuits may include:

replacement of fuses, bulbs and terminals, wiring repairs i.e. open circuits/short circuits/earthing

Repair methods

Repair methods are to include:

electrical measurements

fault finding using aural, visual and functional assessments for damage, corrosion, wear and electrical defects

reading circuit diagrams

pre- and post-repair testing

testing and identifying faults

repairs and adjustments

soldering

Critical precautions

Critical precautions include:

manufacturer/component supplier procedures which must be applied as poor working practices are likely to damage electronic system ECUs and/or other components

OHS requirements

OHS requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures, and may include:

protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulations/codes of practice and workplace policies and practices

Safe operating procedures

Safe operating procedures are to include, but are not limited to:

the conduct of operational risk assessment and treatments associated with vehicular movement, electrical safety, manual lifting and shifting and working in proximity to others and site visitors

Emergency procedures

Emergency procedures related to this unit are to include but may not be limited to:

operating safely in the event of fires, enterprise first aid requirements and site evacuation

Environmental requirements

Environmental requirements are to include but are not limited to:

waste management, noise, dust and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to:

regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory authorities

Statutory/regulatory authorities may include:

federal, state/territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment

Tooling and equipment may include:

hand tooling, test lamp, multimeter, power/air tooling, specialist tooling for removal/replacement, special testing equipment and soldering equipment

Materials

Materials may include:

spare parts, soldering consumables and cleaning material

Communications

Communications are to include, but are not limited to:

verbal and visual instructions and fault reporting and may include site specific instructions, written instructions, sketches, diagrams or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to repairing electrical circuits

regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards