NTISthis.com

Evidence Guide: AURE319145A - Overhaul charging system alternators

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURE319145A - Overhaul charging system alternators

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Work instructions are used to determine job requirements, including method, processes and equipment
  2. Job specifications are read and interpreted
  3. OHS requirements, including personal safety needs, are observed throughout the work
  4. Equipment and tooling are identified and checked for safe and effective operation
  5. Procedures are determined to minimise task time
Work instructions are used to determine job requirements, including method, processes and equipment

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Job specifications are read and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

OHS requirements, including personal safety needs, are observed throughout the work

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment and tooling are identified and checked for safe and effective operation

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Procedures are determined to minimise task time

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Dismantle alternator and clean individual components/parts

  1. Correct information is accessed and interpreted from manufacturer/component supplier specifications
  2. Alternators are dismantled according to component/vehicle manufacturer/component supplier procedures
  3. Alternators are dismantled without causing damage to components
  4. Component parts are cleaned according to unit/vehicle manufacturer/component supplier recommended solvents and procedures
  5. Work is completed according to industry regulations/guidelines, OHS, legislation and enterprise procedures/policies
Correct information is accessed and interpreted from manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternators are dismantled according to component/vehicle manufacturer/component supplier procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternators are dismantled without causing damage to components

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Component parts are cleaned according to unit/vehicle manufacturer/component supplier recommended solvents and procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work is completed according to industry regulations/guidelines, OHS, legislation and enterprise procedures/policies

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspect and test alternator components/parts

  1. Correct information is accessed and interpreted from manufacturer/component supplier specifications
  2. Alternator are inspected and tested according to component/vehicle manufacturer/component supplier specifications
  3. Alternators component parts are inspected and tested without causing damage to component or system
  4. Worn, damaged, deteriorated or faulty components/parts are identified
  5. Part requirements are documented and reported according to enterprise procedures
  6. Inspection and testing is carried out according to industry regulations/guidelines, OHS, legislation and enterprise procedures/policies
Correct information is accessed and interpreted from manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternator are inspected and tested according to component/vehicle manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternators component parts are inspected and tested without causing damage to component or system

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Worn, damaged, deteriorated or faulty components/parts are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Part requirements are documented and reported according to enterprise procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection and testing is carried out according to industry regulations/guidelines, OHS, legislation and enterprise procedures/policies

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Overhaul and reassemble alternator and components/parts

  1. Correct information is accessed and interpreted from manufacturer/component supplier specifications
  2. Alternator parts/components are repaired to manufacturer/component supplier specifications
  3. Alternator replacement parts are selected and fitted to meet customer requirements
  4. Alternators are reassembled according to unit/vehicle manufacturer/component supplier specifications
  5. Alternators are reassembled without causing damage to components/parts
  6. Alternators are assembled according to industry regulations/guidelines, OHS, legislation and enterprise procedures/policies
  7. Alternators are tested according to component/vehicle manufacturer/component supplier specifications
  8. Workplace and equipment documents are completed in accordance with site requirements
Correct information is accessed and interpreted from manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternator parts/components are repaired to manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternator replacement parts are selected and fitted to meet customer requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternators are reassembled according to unit/vehicle manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternators are reassembled without causing damage to components/parts

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternators are assembled according to industry regulations/guidelines, OHS, legislation and enterprise procedures/policies

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Alternators are tested according to component/vehicle manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace and equipment documents are completed in accordance with site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Clean up work area and maintain equipment

  1. Material that can be reused is collected and stored
  2. Waste and scrap is removed following workplace procedure
  3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
  4. Unserviceable equipment is tagged and faults identified in accordance with workplace requirements
  5. Operator maintenance is completed in accordance with manufacturer/component supplier specifications and site procedures
  6. Tooling and equipment is maintained in accordance with workplace procedures
Material that can be reused is collected and stored

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste and scrap is removed following workplace procedure

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is tagged and faults identified in accordance with workplace requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Operator maintenance is completed in accordance with manufacturer/component supplier specifications and site procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tooling and equipment is maintained in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:

observing safety procedures and requirements

communicating effectively with others involved or affected by the work

selecting methods and techniques appropriate to the circumstances

completing preparatory activity in a systematic manner

cleaning, testing, inspecting and evaluating components of units

overhauling units, including dismantling and reassembling units to manufacturer/component supplier requirements

repairing/replacing component parts to manufacturer/component supplier requirements

testing final product for return to service

completing workplace and equipment documents.

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite.

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.

Assessment is to comply with regulatory requirements, including Australian Standards.

The following resources should be made available:

workplace location or simulated workplace

material relevant to the overhaul of charging system alternators

equipment, hand and power tooling appropriate to the overhaul of charging system alternators

activities covering mandatory task requirements

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of AUR05 Automotive Industry RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able to be under the particular circumstance, and is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment

Required Skills and Knowledge

Required skills

collect, organise and understand information related to work orders, plans and safety procedures for the overhaul of automotive alternators

technical literacy and communication skills sufficient to interpret and apply common industry terminology, and interpret technical information and specifications

research and interpretive skills to locate, interpret and apply operational and safety information

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

plain English literacy and communication skills in relation to dealing with others involved in the work

questioning and active listening skills, for example when obtaining information of alternator overhaul procedures

plan and organise activities, including preparation and layout of worksite and obtaining of equipment and material to avoid backtracking or workflow interruptions

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

use mathematical ideas and techniques to correctly complete tests and measurements to determine serviceability of alternator component parts

use pre-checking and inspection techniques to anticipate planning and scheduling problems, avoid wastage of time and material

manipulative and dexterity skills to perform alternator overhaul and component testing and repair/replacement procedures

problem-solving skills for a range of procedural issues

use workplace technology related to the overhaul of charging system alternators, the use of specialist tooling and equipment, measuring equipment, computerised technology and communication devices and the reporting/documenting of results

Required knowledge

A working knowledge of:

OHS regulations/requirement, equipment, material and personal safety requirements

alternator operating principles

construction and operation of alternators and components relevant to application

types and layout of service/repair manuals (hard copy and electronic)

component cleaning, inspection and testing procedures

dismantling and assembling/overhaul procedures

unit assembly test procedures

work organisation and planning processes

enterprise quality processes

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Electrical system alternators and components

Electrical system alternators and components may be fitted to vehicles, plant and equipment, motorcycles and marine equipment

Faults

Faults may include:

alternator not charging, noisy operation, open circuits, short circuits and earthing

Overhaul methods

Overhaul methods are to include:

measurements, fault finding with aural, visual and functional assessments (including damage, corrosion, wear, electrical leakage, short circuits and broken circuits), reading/interpreting manufacturer/component supplier information, dismantle, clean, inspect, test and reassemble, fit replacement parts and retest for service

OHS requirements

OHS requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures, and may include:

protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures

Safe operating procedures are to include, but are not limited to:

the conduct of operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures

Emergency procedures related to this unit are to include, but may not be limited to:

emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements

Environmental requirements are to include, but are not limited to:

waste management, noise, dust and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to:

regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory authorities

Statutory/regulatory authorities may include:

federal, state/territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment

Tooling and equipment may include:

hand tooling, testing equipment, including diode testers, multimeters, growlers and insulation testers, soldering equipment, power tooling, test benches, measuring equipment, including micrometers and callipers

Materials

Materials may include:

spare parts, solder, flux and cleaning material

Communications

Communications are to include, but are not limited to:

verbal and visual instructions and fault reporting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to the overhaul of charging system alternators

regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards