NTISthis.com

Evidence Guide: AURETR005 - Install automotive security systems and components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURETR005 - Install automotive security systems and components

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to install security system and components

  1. Job requirements are determined according to workplace instructions
  2. Manufacturer specifications and installation fitting instructions are accessed and interpreted
  3. Installation options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment are selected and checked for serviceability
Job requirements are determined according to workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and installation fitting instructions are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and test security system and components

  1. Security system and components are checked for correct application and damage
  2. Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  3. Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications
  4. Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified
Security system and components are checked for correct application and damage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to install security system and components

  1. Job requirements are determined according to workplace instructions
  2. Manufacturer specifications and installation fitting instructions are accessed and interpreted
  3. Installation options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment are selected and checked for serviceability
Job requirements are determined according to workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and installation fitting instructions are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and test security system and components

  1. Security system and components are checked for correct application and damage
  2. Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  3. Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications
  4. Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified
Security system and components are checked for correct application and damage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to install security system and components

1.1 Job requirements are determined according to workplace instructions

1.2 Manufacturer specifications and installation fitting instructions are accessed and interpreted

1.3 Installation options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Install and test security system and components

2.1 Security system and components are checked for correct application and damage

2.2 Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

2.3 Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications

2.4 Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to install security system and components

1.1 Job requirements are determined according to workplace instructions

1.2 Manufacturer specifications and installation fitting instructions are accessed and interpreted

1.3 Installation options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Install and test security system and components

2.1 Security system and components are checked for correct application and damage

2.2 Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

2.3 Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications

2.4 Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in the unit’s elements, performance criteria, range of conditions and foundation skills:

install two of the following security systems and components on non controller area network databus (CAN-bus) systems in different vehicles, vessels or machinery, including:

security alarm systems

single point immobilisation (engine start inhibit)

tilt, impact and vibration shock alarm activation sensors

audible and visual alert alarm equipment

theft alert vehicle and equipment tracking systems.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to installing automotive security systems and components, including procedures for:

using specialised tools and equipment

selecting and using personal protective equipment (PPE)

identifying hazards and controlling risks associated with:

working on high voltage ignition systems

wearing jewellery while working around high current wiring systems

types and basic operation of automotive security systems, including:

complete vehicle or equipment security alarm systems

single point immobilisation (engine start inhibit)

dual point immobilisation (engine start inhibit and fuel shut-off)

tilt, impact and vibration shock alarm activation sensors

audible and visual alert alarm equipment

theft alert vehicle and equipment tracking systems

procedures for installing automotive security systems and components, including:

techniques for reading and interpreting technical information, wiring diagrams and graphic symbols

methods of determining wiring and connection type and size for system

methods of determining placement of components on vehicle or machinery

methods of connecting system and components to existing electrical system without causing damage or problems, including:

selecting and soldering wires

selecting and crimping terminals

removing and replacing connectors

removing and replacing existing electrical components

post-installation testing procedures of automotive security system and components, including procedures for:

checking full operation of installed system

checking operation of existing electrical systems.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

using specialised tools and equipment

selecting and using personal protective equipment (PPE)

identifying hazards and controlling risks associated with:

working on high voltage ignition systems

wearing jewellery while working around high current wiring systems.