NTISthis.com

Evidence Guide: AURETR019 - Inspect, service and repair AC electric motor drive systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURETR019 - Inspect, service and repair AC electric motor drive systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect, service and repair AC electric motor drive system

  1. Job requirements are determined according to workplace instructions
  2. Inspection and servicing procedures are accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined according to workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection and servicing procedures are accessed and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspect and test system

  1. System is inspected and tested according to workplace procedures and safety requirements
  2. Circuits are tested according to workplace procedures and without causing damage to components or systems
  3. Inspection results are compared with manufacturer specifications
  4. Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
System is inspected and tested according to workplace procedures and safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Circuits are tested according to workplace procedures and without causing damage to components or systems

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service and repair system

  1. System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. System is performance tested and final adjustments are made
  3. Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

System is performance tested and final adjustments are made

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare to inspect, service and repair AC electric motor drive system

  1. Job requirements are determined according to workplace instructions
  2. Inspection and servicing procedures are accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined according to workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection and servicing procedures are accessed and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspect and test system

  1. System is inspected and tested according to workplace procedures and safety requirements
  2. Circuits are tested according to workplace procedures and without causing damage to components or systems
  3. Inspection results are compared with manufacturer specifications
  4. Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
System is inspected and tested according to workplace procedures and safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Circuits are tested according to workplace procedures and without causing damage to components or systems

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service and repair system

  1. System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. System is performance tested and final adjustments are made
  3. Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

System is performance tested and final adjustments are made

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect, service and repair AC electric motor drive system

1.1 Job requirements are determined according to workplace instructions

1.2 Inspection and servicing procedures are accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Inspect and test system

2.1 System is inspected and tested according to workplace procedures and safety requirements

2.2 Circuits are tested according to workplace procedures and without causing damage to components or systems

2.3 Inspection results are compared with manufacturer specifications

2.4 Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments

3. Service and repair system

3.1 System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 System is performance tested and final adjustments are made

3.3 Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect, service and repair AC electric motor drive system

1.1 Job requirements are determined according to workplace instructions

1.2 Inspection and servicing procedures are accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Inspect and test system

2.1 System is inspected and tested according to workplace procedures and safety requirements

2.2 Circuits are tested according to workplace procedures and without causing damage to components or systems

2.3 Inspection results are compared with manufacturer specifications

2.4 Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments

3. Service and repair system

3.1 System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 System is performance tested and final adjustments are made

3.3 Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

inspect, service and repair three of the following alternating current (AC) electric motor drive systems in different vehicles, vessels or machinery:

AC single phase induction motor

AC three phase induction motor

AC brush commutator motor

AC synchronous motor.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting, servicing and repairing AC electric motor drive systems, including procedures for:

selecting and using personal protective equipment (PPE), including clothing, and eye and hand protection

working safely with high current electrical systems

operating principles of AC electric motor drive systems, including of:

AC single phase induction motor

AC three phase induction motor

AC brush commutator motor

AC synchronous motor

application, purpose and operation of AC electric motor drive systems, including:

forklifts

golf karts and buggies

electric vehicle transportation

recreational vehicles, including quad bikes and motorcycles

inspection procedures for AC electric motor drive systems, including for analysing system operation

procedures for testing AC electric motor drive systems, including:

accessing electrical terminals and using test probes without damaging connectors, fuse holders or wiring

procedures for using and operating electrical test equipment, including:

digital multimeters

test lights and probes

oscilloscopes

service and repair procedures for AC electric motor drive systems, including:

component removal and replacement procedures

component and associated system adjustment procedures

post-repair testing procedures for AC electric motor drive systems, including:

confirming that system is operating to manufacturer specifications

confirming that no other problems are present as a result of the repair.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE), including clothing, and eye and hand protection

working safely with high current electrical systems.