NTISthis.com

Evidence Guide: AURETR033 - Develop and apply network electronic control system modifications

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURETR033 - Develop and apply network electronic control system modifications

What evidence can you provide to prove your understanding of each of the following citeria?

Identify and confirm the modification requirement

  1. Job requirements are determined from workplace instructions
  2. Reasons for the modification are identified and confirmed with appropriate persons
  3. Modification options are identified and reported to appropriate persons according to workplace procedures
  4. Hazards associated with the work are identified and risks are managed
  5. Legal and safety impacts of the modification are considered, as required, according to regulatory requirements
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Reasons for the modification are identified and confirmed with appropriate persons

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Modification options are identified and reported to appropriate persons according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Legal and safety impacts of the modification are considered, as required, according to regulatory requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Develop and validate the modification specification

  1. Manufacturer specifications for the existing network electronic control systems are sourced and interpreted
  2. Criteria for selecting the modification method and evaluating the outcomes are identified and documented
  3. Proposed modification method is identified, selected and evaluated from available options
  4. Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria
  5. Modification specification is documented according to workplace procedures
Manufacturer specifications for the existing network electronic control systems are sourced and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Criteria for selecting the modification method and evaluating the outcomes are identified and documented

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Proposed modification method is identified, selected and evaluated from available options

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Modification specification is documented according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Apply and test the modification specification

  1. Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use
  2. Selected modification method is carried out according to workplace procedures and safety requirements
  3. Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified
  4. Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes
  5. Variations needed during the modification process or as a result of testing are incorporated into the modification specification
  6. Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations
Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Selected modification method is carried out according to workplace procedures and safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Variations needed during the modification process or as a result of testing are incorporated into the modification specification

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify and confirm the modification requirement

  1. Job requirements are determined from workplace instructions
  2. Reasons for the modification are identified and confirmed with appropriate persons
  3. Modification options are identified and reported to appropriate persons according to workplace procedures
  4. Hazards associated with the work are identified and risks are managed
  5. Legal and safety impacts of the modification are considered, as required, according to regulatory requirements
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Reasons for the modification are identified and confirmed with appropriate persons

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Modification options are identified and reported to appropriate persons according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Legal and safety impacts of the modification are considered, as required, according to regulatory requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Develop and validate the modification specification

  1. Manufacturer specifications for the existing network electronic control systems are sourced and interpreted
  2. Criteria for selecting the modification method and evaluating the outcomes are identified and documented
  3. Proposed modification method is identified, selected and evaluated from available options
  4. Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria
  5. Modification specification is documented according to workplace procedures
Manufacturer specifications for the existing network electronic control systems are sourced and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Criteria for selecting the modification method and evaluating the outcomes are identified and documented

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Proposed modification method is identified, selected and evaluated from available options

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Modification specification is documented according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Apply and test the modification specification

  1. Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use
  2. Selected modification method is carried out according to workplace procedures and safety requirements
  3. Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified
  4. Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes
  5. Variations needed during the modification process or as a result of testing are incorporated into the modification specification
  6. Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations
Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Selected modification method is carried out according to workplace procedures and safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Variations needed during the modification process or as a result of testing are incorporated into the modification specification

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Identify and confirm the modification requirement

1.1 Job requirements are determined from workplace instructions

1.2 Reasons for the modification are identified and confirmed with appropriate persons

1.3 Modification options are identified and reported to appropriate persons according to workplace procedures

1.4 Hazards associated with the work are identified and risks are managed

1.5 Legal and safety impacts of the modification are considered, as required, according to regulatory requirements

2. Develop and validate the modification specification

2.1 Manufacturer specifications for the existing network electronic control systems are sourced and interpreted

2.2 Criteria for selecting the modification method and evaluating the outcomes are identified and documented

2.3 Proposed modification method is identified, selected and evaluated from available options

2.4 Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria

2.5 Modification specification is documented according to workplace procedures

3. Apply and test the modification specification

3.1 Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use

3.2 Selected modification method is carried out according to workplace procedures and safety requirements

3.3 Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified

3.4 Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes

3.5 Variations needed during the modification process or as a result of testing are incorporated into the modification specification

3.6 Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Identify and confirm the modification requirement

1.1 Job requirements are determined from workplace instructions

1.2 Reasons for the modification are identified and confirmed with appropriate persons

1.3 Modification options are identified and reported to appropriate persons according to workplace procedures

1.4 Hazards associated with the work are identified and risks are managed

1.5 Legal and safety impacts of the modification are considered, as required, according to regulatory requirements

2. Develop and validate the modification specification

2.1 Manufacturer specifications for the existing network electronic control systems are sourced and interpreted

2.2 Criteria for selecting the modification method and evaluating the outcomes are identified and documented

2.3 Proposed modification method is identified, selected and evaluated from available options

2.4 Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria

2.5 Modification specification is documented according to workplace procedures

3. Apply and test the modification specification

3.1 Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use

3.2 Selected modification method is carried out according to workplace procedures and safety requirements

3.3 Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified

3.4 Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes

3.5 Variations needed during the modification process or as a result of testing are incorporated into the modification specification

3.6 Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

develop and apply one of the following significant and non-routine modifications on the network electronic control system of two different vehicles, vessels, machinery or equipment:

adapt or modify network electronic control system to a significantly changed capability

adapt network electronic control system for different work conditions

modify or install a significant network electronic control system for a special purpose.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to developing and applying network electronic control system modifications, including procedures for:

identifying hazards and controlling risks associated with wearing jewellery while working around high current wiring systems

using personal protective equipment (PPE) and hand tools

location and content of manufacturer specifications, workplace procedures and other relevant technical information relating to modifying network electronic control systems

principles and processes involved in planning and implementing modifications to network electronic control systems

types, functions, operation and limitations of the main automotive industry network electronic control systems being modified

types, functions, operation and limitations of diagnostic testing equipment required for network electronic control system modifications, including scan tools and oscilloscopes

requirements of Australian Design Rules (ADRs) and Vehicle Safety Bulletins (VSBs) relating to network electronic control system modifications

procedures for documenting and reporting the modification specifications and outcomes.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

identifying hazards and controlling risks associated with wearing jewellery while working around high current wiring systems

using personal protective equipment (PPE) and hand tools.