NTISthis.com

Evidence Guide: AURJTA002 - Remove and replace motorcycle components and accessories

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURJTA002 - Remove and replace motorcycle components and accessories

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and replace motorcycle component or accessory

  1. Task requirements are determined from workshop or activity instructions
  2. Removal and replacement procedures and information are sourced and interpreted
  3. Potential hazards and risks associated with the task are identified and reported to workplace supervisor
  4. Tools, equipment and materials are selected and checked for serviceability
Task requirements are determined from workshop or activity instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and replacement procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with the task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove component or accessory

  1. Component or accessory is identified and removed according to manufacturer specifications and without causing damage to other components or systems
  2. Inspection of component or accessory is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  3. Inspection findings are reported according to workplace procedures, including recommendations for replacement and minor adjustments
Component or accessory is identified and removed according to manufacturer specifications and without causing damage to other components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection of component or accessory is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for replacement and minor adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replace component or accessory

  1. Component or accessory is replaced according to manufacturer specifications and without causing damage to components or systems
  2. Adjustments are made to component or accessory according to manufacturer specifications
  3. Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
Component or accessory is replaced according to manufacturer specifications and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustments are made to component or accessory according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instructions and workplace standards
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instructions and workplace standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to remove and replace motorcycle component or accessory

  1. Task requirements are determined from workshop or activity instructions
  2. Removal and replacement procedures and information are sourced and interpreted
  3. Potential hazards and risks associated with the task are identified and reported to workplace supervisor
  4. Tools, equipment and materials are selected and checked for serviceability
Task requirements are determined from workshop or activity instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and replacement procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with the task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove component or accessory

  1. Component or accessory is identified and removed according to manufacturer specifications and without causing damage to other components or systems
  2. Inspection of component or accessory is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  3. Inspection findings are reported according to workplace procedures, including recommendations for replacement and minor adjustments
Component or accessory is identified and removed according to manufacturer specifications and without causing damage to other components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection of component or accessory is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for replacement and minor adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replace component or accessory

  1. Component or accessory is replaced according to manufacturer specifications and without causing damage to components or systems
  2. Adjustments are made to component or accessory according to manufacturer specifications
  3. Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
Component or accessory is replaced according to manufacturer specifications and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustments are made to component or accessory according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instructions and workplace standards
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instructions and workplace standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace motorcycle component or accessory

1.1 Task requirements are determined from workshop or activity instructions

1.2 Removal and replacement procedures and information are sourced and interpreted

1.3 Potential hazards and risks associated with the task are identified and reported to workplace supervisor

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Remove component or accessory

2.1 Component or accessory is identified and removed according to manufacturer specifications and without causing damage to other components or systems

2.2 Inspection of component or accessory is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.3 Inspection findings are reported according to workplace procedures, including recommendations for replacement and minor adjustments

3. Replace component or accessory

3.1 Component or accessory is replaced according to manufacturer specifications and without causing damage to components or systems

3.2 Adjustments are made to component or accessory according to manufacturer specifications

3.3 Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instructions and workplace standards

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace motorcycle component or accessory

1.1 Task requirements are determined from workshop or activity instructions

1.2 Removal and replacement procedures and information are sourced and interpreted

1.3 Potential hazards and risks associated with the task are identified and reported to workplace supervisor

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Remove component or accessory

2.1 Component or accessory is identified and removed according to manufacturer specifications and without causing damage to other components or systems

2.2 Inspection of component or accessory is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.3 Inspection findings are reported according to workplace procedures, including recommendations for replacement and minor adjustments

3. Replace component or accessory

3.1 Component or accessory is replaced according to manufacturer specifications and without causing damage to components or systems

3.2 Adjustments are made to component or accessory according to manufacturer specifications

3.3 Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instructions and workplace standards

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and replace three of the following motorcycle components and accessories:

wheels

mudguards

lighting system components

suspension system components

brake system components

fuel tank

oil tank

seat

control cables

ignition system components

handlebars and hand controls

foot controls and foot pegs

mufflers and exhaust pipes

windshield

pannier bags

luggage racks.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing motorcycle components and accessories, including:

lifting and supporting motorcycles

selecting and using personal protective equipment (PPE)

avoiding entanglement when working with chains, sprockets, belts and pulleys

environmental requirements, including procedures for trapping, storing and disposing of lubricants, oils and fluids released during the adjustment process

identification and function of the motorcycle components and accessories specified in the performance evidence

motorcycle removal and replacement procedures, including the use of tools and equipment

testing procedures and adjustment methods relating to motorcycle component and accessory removal and replacement

motorcycle post-adjustment testing procedures.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

lifting and supporting motorcycles

selecting and using personal protective equipment (PPE)

avoiding entanglement when working with chains, sprockets, belts and pulleys

environmental requirements, including procedures for trapping, storing and disposing of lubricants, oils and fluids released during the adjustment process.