NTISthis.com

Evidence Guide: AURJTA1001 - Perform minor adjustments to motorcycles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURJTA1001 - Perform minor adjustments to motorcycles

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Workplace instructions are used to determine job requirements relating to adjusting motorcycles
  2. Workplace health and safety (WHS) requirements are identified and applied
  3. Work areas are cleared to allow set-up and activities to take place according to workplace policies and procedures
Workplace instructions are used to determine job requirements relating to adjusting motorcycles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace health and safety (WHS) requirements are identified and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work areas are cleared to allow set-up and activities to take place according to workplace policies and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect motorcycle and determine work requirement

  1. Inspection is carried out to determine adjustment requirements according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems
  2. Inspection findings are reported according to workplace procedures, including recommendations for necessary minor adjustments
Inspection is carried out to determine adjustment requirements according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for necessary minor adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform minor adjustments

  1. Adjustment options are analysed and those most appropriate to the circumstances are selected
  2. Appropriate tools, techniques and materials are selected and prepared
  3. Adjustments are carried out according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems
  4. Post-adjustment testing is carried out to ensure safe and correct operation of the motorcycle
Adjustment options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate tools, techniques and materials are selected and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustments are carried out according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-adjustment testing is carried out to ensure safe and correct operation of the motorcycle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up work area and finalise work processes

  1. Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
  2. Tools and equipment are checked and stored according to workplace expectations
  3. Documentation is completed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace expectations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Documentation is completed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.

A person who demonstrates competency in this unit must be able to:

observe safety procedures and requirements

select methods and techniques appropriate to the circumstances

preform a range of adjustment tasks on a minimum of three different motorcycles with real or simulated adjustment requirements according to workplace, manufacturer and component supplier requirements

complete workplace documentation

present motorcycle in a condition that complies with workplace requirements.

Context of, and specific resources for assessment

Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.

Assessment is to occur:

using standard workplace practices and procedures

following safety requirements

applying environmental constraints.

Assessment is to comply with relevant:

regulatory requirements

Australian standards

industry codes of practice.

The following resources should be made available:

workplace location or simulated workplace

motorcycles and motorcycle components

equipment, hand and power tools and specialised repair tools and equipment appropriate to adjusting motorcycle

specifications and workplace instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.

Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.

Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.

Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Required Skills and Knowledge

Required skills

communication skills to:

clarify workplace instructions and determine job requirements

gain information from appropriate persons and assistance as required

literacy skills:

reading skills to the level required to understand information relating to work orders, including common industry terminology, work plans and safety procedures

writing skills to prepare reports and interpret technical information and specifications

numeracy skills to correctly interpret metric and non-metric systems of measurement

planning and organising skills to:

identify risk factors to minimise risk to self and others

contribute to activities which implement and follow standard workplace procedures

problem-solving skills to:

identify technical and procedural problems

refer problems outside area of responsibility to appropriate person

self-management skills to:

locate and identify appropriate tools and equipment

recognise limitations and seek timely advice

follow basic workplace documentation, such as maintenance procedures

teamwork skills to:

work with others and in a team by cooperating with team members

technical skills to:

apply technical information related to motorcycle componentry and maintenance procedures

select and use appropriate tools and equipment

technology skills to:

use workplace technology to assist with work practices

Required knowledge

WHS regulations, requirements, equipment and material, and personal safety requirements

motorcycle terminology

methods of sourcing information relevant to adjusting motorcycles

motorcycle inspection procedures

motorcycle adjustment procedures, including the use of tools and equipment

motorcycle post-adjustment testing procedures

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Workplace instructions may include:

computer-generated instructions

verbal instructions

written instructions.

Job requirements may include:

motorcycle inspection and adjustment methods, processes and equipment.

Motorcycles may include:

road and touring

enduro

agricultural

motocross

trials

scooters and mopeds

2 stroke and 4 stroke.

Workplace health and safety (WHS) requirements:

are those prescribed under legislation, regulations, codes of practice, and workplace policies and procedures

may include:

protective clothing and equipment

use of tools and equipment

handling of material

use of fire-fighting equipment

first aid equipment

hazard control, including control of hazardous materials and toxic substances.

Minor adjustments may include:

brakes

clutch

suspension and steering

engine, attachments and controls

chain tension

foot controls

handlebars and controls

accessories.

Appropriate tools may include

hand tools

hand, power and air tools

specialised motorcycle repair tools

floor stands, workbench.

Documentation may include:

warranty information

job card or work order

workplace computerised or written customer records and invoice.