NTISthis.com

Evidence Guide: AURJTX002 - Diagnose and repair motorcycle manual transmissions

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURJTX002 - Diagnose and repair motorcycle manual transmissions

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to diagnose and repair motorcycle manual transmission

  1. Job requirements are determined from workplace instructions
  2. Diagnostic information is sourced and interpreted
  3. Diagnostic options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Diagnostic tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnostic information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnostic options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnostic tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnose manual transmission

  1. Diagnostic tests are performed according to workplace procedures and safety and environmental requirements
  2. Faults are identified from diagnostic test results and causes of faults are determined
  3. Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are identified from diagnostic test results and causes of faults are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair manual transmission

  1. Repair information is sourced and interpreted
  2. Repair options are analysed and those most appropriate to the circumstances are selected
  3. Repair tools, equipment and materials are selected and checked
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system
  5. Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Repair information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to diagnose and repair motorcycle manual transmission

  1. Job requirements are determined from workplace instructions
  2. Diagnostic information is sourced and interpreted
  3. Diagnostic options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Diagnostic tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnostic information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnostic options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnostic tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnose manual transmission

  1. Diagnostic tests are performed according to workplace procedures and safety and environmental requirements
  2. Faults are identified from diagnostic test results and causes of faults are determined
  3. Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are identified from diagnostic test results and causes of faults are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair manual transmission

  1. Repair information is sourced and interpreted
  2. Repair options are analysed and those most appropriate to the circumstances are selected
  3. Repair tools, equipment and materials are selected and checked
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system
  5. Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Repair information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair motorcycle manual transmission

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose manual transmission

2.1 Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair manual transmission

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.5 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair motorcycle manual transmission

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose manual transmission

2.1 Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair manual transmission

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.5 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose and repair a fault in two different motorcycles with different manual transmissions, in which the work must involve removing, dismantling, reassembling and refitting the transmissions.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing motorcycle manual transmissions, including procedures for handling transmission fluids and clutch materials

environmental requirements, including procedures for trapping, storing and disposing of fluids released from transmissions

operating principles of motorcycle manual transmissions and associated components, including:

gears types

gear ratios

application, purpose and operation of motorcycle manual transmissions and components, including:

transmission types, including:

vertical split-type crankcase

horizontal split-type crankcase

cassette-type

sliding gear transmissions, including:

dog clutches

shifter drums

cam plates

constant-mesh transmissions, including ball lock-type systems

quick shifters

types and compatibility of transmission system oils and additives

diagnostic testing procedures for motorcycle manual transmissions, including procedures for analysing:

component wear

abnormal system noise

repair procedures for motorcycle manual transmissions, including procedures for removing, dismantling, reassembling, refitting and adjusting components

post-repair testing procedures for motorcycle manual transmissions.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for handling transmission fluids and clutch materials

environmental requirements, including procedures for trapping, storing and disposing of fluids released from transmissions.