NTISthis.com

Evidence Guide: AURKTA010 - Inspect, service and repair hay cutting, raking and baling equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURKTA010 - Inspect, service and repair hay cutting, raking and baling equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect hay cutting, raking and baling equipment

  1. Job requirements are determined from workplace instructions
  2. Inspection procedures and information for hay cutting, raking and baling equipment are sourced and interpreted
  3. Options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection procedures and information for hay cutting, raking and baling equipment are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct inspection and analyse results

  1. Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  2. Inspection results are compared with manufacturer specifications
  3. Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and repair equipment

  1. Service and repair procedures and information are sourced and interpreted
  2. Service and repair tools, equipment and materials are selected and checked
  3. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  5. Equipment and systems are test run and adjustments are carried out as required
Service and repair procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and systems are test run and adjustments are carried out as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare equipment for operation

  1. Variable operating parameters are identified from manufacturer specifications and analysis of proposed work environment and conditions
  2. Equipment variables, including management system settings, controls and monitoring systems, are established and prepared for proposed operations
  3. Equipment and systems are test run and final adjustments are made
  4. Post-repair testing is carried out according to workplace procedures
Variable operating parameters are identified from manufacturer specifications and analysis of proposed work environment and conditions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment variables, including management system settings, controls and monitoring systems, are established and prepared for proposed operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and systems are test run and final adjustments are made

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including ensuring that protective guards, safety features and cowlings are in place
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including ensuring that protective guards, safety features and cowlings are in place

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to inspect hay cutting, raking and baling equipment

  1. Job requirements are determined from workplace instructions
  2. Inspection procedures and information for hay cutting, raking and baling equipment are sourced and interpreted
  3. Options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection procedures and information for hay cutting, raking and baling equipment are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct inspection and analyse results

  1. Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  2. Inspection results are compared with manufacturer specifications
  3. Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and repair equipment

  1. Service and repair procedures and information are sourced and interpreted
  2. Service and repair tools, equipment and materials are selected and checked
  3. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  5. Equipment and systems are test run and adjustments are carried out as required
Service and repair procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and systems are test run and adjustments are carried out as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare equipment for operation

  1. Variable operating parameters are identified from manufacturer specifications and analysis of proposed work environment and conditions
  2. Equipment variables, including management system settings, controls and monitoring systems, are established and prepared for proposed operations
  3. Equipment and systems are test run and final adjustments are made
  4. Post-repair testing is carried out according to workplace procedures
Variable operating parameters are identified from manufacturer specifications and analysis of proposed work environment and conditions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment variables, including management system settings, controls and monitoring systems, are established and prepared for proposed operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and systems are test run and final adjustments are made

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including ensuring that protective guards, safety features and cowlings are in place
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including ensuring that protective guards, safety features and cowlings are in place

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect hay cutting, raking and baling equipment

1.1 Job requirements are determined from workplace instructions

1.2 Inspection procedures and information for hay cutting, raking and baling equipment are sourced and interpreted

1.3 Options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools, equipment and materials are selected and checked for serviceability

2. Conduct inspection and analyse results

2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Inspection results are compared with manufacturer specifications

2.3 Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

3. Service and repair equipment

3.1 Service and repair procedures and information are sourced and interpreted

3.2 Service and repair tools, equipment and materials are selected and checked

3.3 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.5 Equipment and systems are test run and adjustments are carried out as required

4. Prepare equipment for operation

4.1 Variable operating parameters are identified from manufacturer specifications and analysis of proposed work environment and conditions

4.2 Equipment variables, including management system settings, controls and monitoring systems, are established and prepared for proposed operations

4.3 Equipment and systems are test run and final adjustments are made

4.4 Post-repair testing is carried out according to workplace procedures

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including ensuring that protective guards, safety features and cowlings are in place

5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

5.3 Tools and equipment are checked and stored according to workplace procedures

5.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect hay cutting, raking and baling equipment

1.1 Job requirements are determined from workplace instructions

1.2 Inspection procedures and information for hay cutting, raking and baling equipment are sourced and interpreted

1.3 Options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools, equipment and materials are selected and checked for serviceability

2. Conduct inspection and analyse results

2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Inspection results are compared with manufacturer specifications

2.3 Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

3. Service and repair equipment

3.1 Service and repair procedures and information are sourced and interpreted

3.2 Service and repair tools, equipment and materials are selected and checked

3.3 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.5 Equipment and systems are test run and adjustments are carried out as required

4. Prepare equipment for operation

4.1 Variable operating parameters are identified from manufacturer specifications and analysis of proposed work environment and conditions

4.2 Equipment variables, including management system settings, controls and monitoring systems, are established and prepared for proposed operations

4.3 Equipment and systems are test run and final adjustments are made

4.4 Post-repair testing is carried out according to workplace procedures

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including ensuring that protective guards, safety features and cowlings are in place

5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

5.3 Tools and equipment are checked and stored according to workplace procedures

5.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

inspect, service and repair:

hay cutting equipment

hay raking equipment

hay baling equipment, including one of the following:

round baler

small or large rectangular baler.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting, servicing and repairing hay cutting, raking and baling equipment, including procedures for:

isolating and stabilising equipment and machines

working with rotating shafts

environmental requirements, including procedures for waste management, machine hygiene, dust and clean-up management

operating principles of equipment, including:

hay cutting equipment

hay raking equipment

hay baling equipment, including for round bales or small and large rectangular bales

application, purpose and operation of hay cutting, raking and baling equipment, including:

hay cutting equipment:

disc mowers

sickle bar mowers

hay raking equipment:

side delivery rakes

wheel rakes

tedders

round and rectangular hay baling equipment, including:

electronic monitoring control

pick-up and feed system

packing system

compression system

knotting system

ejection system

inspection procedures for hay cutting, raking and baling equipment, including:

component wear analysis

system operation analysis

electronic fault code interrogation

service and repair procedures for hay cutting, raking and baling equipment, including removing, replacing, repairing and adjusting hay cutting, raking and baling equipment components

post-repair testing procedures for hay cutting, raking and baling equipment, including:

variable operating parameters

impact of environmental factors.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Hay cutting, raking and baling equipment must include:

equipment for cutting and raking hay in preparation for baling

equipment that may be for baling round bales, or small and large rectangular bales.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

isolating and stabilising equipment and machines

working with rotating shafts

environmental requirements, including procedures for waste management, machine hygiene, dust and clean-up management.