NTISthis.com

Evidence Guide: AURLTQ002 - Diagnose and repair light vehicle drive shafts

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURLTQ002 - Diagnose and repair light vehicle drive shafts

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to diagnose and repair light vehicle drive shaft

  1. Job requirements are determined from workplace instructions
  2. Diagnostic information is sourced and interpreted
  3. Diagnostic options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Diagnostic tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnostic information is sourced and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnostic options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnostic tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnose drive shaft

  1. Diagnostic tests are performed according to workplace procedures and safety and environmental requirements
  2. Faults are identified from diagnostic test results and causes of faults are determined
  3. Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Faults are identified from diagnostic test results and causes of faults are determined

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repair drive shaft

  1. Repair information is sourced and interpreted
  2. Repair options are analysed and those most appropriate to the circumstances are selected
  3. Repair tools, equipment and materials are selected and checked
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or system
  5. Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Repair information is sourced and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repair options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or system

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and drive shaft or vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and drive shaft or vehicle is presented ready for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare to diagnose and repair light vehicle drive shaft

  1. Job requirements are determined from workplace instructions
  2. Diagnostic information is sourced and interpreted
  3. Diagnostic options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Diagnostic tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnostic information is sourced and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnostic options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnostic tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnose drive shaft

  1. Diagnostic tests are performed according to workplace procedures and safety and environmental requirements
  2. Faults are identified from diagnostic test results and causes of faults are determined
  3. Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Faults are identified from diagnostic test results and causes of faults are determined

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repair drive shaft

  1. Repair information is sourced and interpreted
  2. Repair options are analysed and those most appropriate to the circumstances are selected
  3. Repair tools, equipment and materials are selected and checked
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or system
  5. Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Repair information is sourced and interpreted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repair options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or system

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and drive shaft or vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and drive shaft or vehicle is presented ready for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair light vehicle drive shaft

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose drive shaft

2.1 Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair drive shaft

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or system

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and drive shaft or vehicle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair light vehicle drive shaft

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose drive shaft

2.1 Diagnostic tests are performed according to workplace procedures and safety and environmental requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair drive shaft

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or system

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and drive shaft or vehicle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose and repair the following drive shafts in two different light vehicles, in which the work must involve:

one rear wheel drive vehicle with drive shaft with universal joints, including removing the drive shaft from vehicle, replacing one universal joint, and refitting the drive shaft

one front wheel drive vehicle with constant velocity joint drive shaft, including removing the drive shaft from the vehicle and refitting it.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing light vehicle drive shafts, including procedures for working with hazardous oils

environmental procedures for trapping, storing and disposing of oils released from drive shafts

operating principles of light vehicle drive shafts and associated components, including:

torque reaction of rear axle housings

torque steer

application, purpose and operation of the following components of light vehicle drive shafts and components, including:

propeller shafts, including:

single and multi-piece shafts

universal joints, including cross and yoke joints, double cardan joints and Lobro joints

velocity fluctuation of universal joints

shaft alignment

constant velocity joints, including:

Birfield joints

double offset joints

tripod joints

diagnostic testing procedures for light vehicle drive shafts, including road testing procedures that include drive shaft noise and vibration

repair procedures for light vehicle drive shafts, including procedures for:

dismantling drive shafts

inspecting drive shafts

reassembling and aligning components

post-repair testing procedures for light vehicle drive shafts.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for working with hazardous oils

environmental requirements, including procedures for trapping, storing and disposing of oils released from drive shafts.