The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine and select competition vehicle tyres and wheels
|
|
Use controlling body and category rules, supplementary regulations, component supplier specifications and team instructions to specify task requirements, including design, quality, material, equipment and quantities Completed |
Evidence:
|
Observe occupational health and safety (OHS) requirements, including regulatory requirements, equipment and system isolation requirements, and personal protection needs, throughout the work Completed |
Evidence:
|
Use regulations and specifications/tolerances to identify a competitive advantage Completed |
Evidence:
|
Check specifications for required operating conditions and seek clarification of specifications, where required Completed |
Evidence:
|
Formulate tyre and wheel requirements according to known factors Completed |
Evidence:
|
Select tyre and wheel assemblies for application against requirements and document and report to appropriate persons Completed |
Evidence:
|
Prepare work area and equipment
|
|
Check tooling and equipment for safe and effective operation Completed |
Evidence:
|
Clean and lay out work are for job requirements Completed |
Evidence:
|
Report problems with the work area or the operation of equipment to appropriate persons Completed |
Evidence:
|
Mount tyre and wheel assembly to vehicle
|
|
Clean or treat mounting surfaces and threaded components and check for damage Completed |
Evidence:
|
Select tyre and wheel assemblies from stock according to markings (i.e. scrutineers/category officials or team markings) and check against criteria for an event Completed |
Evidence:
|
Inspect tyre and wheel assemblies for serviceability Completed |
Evidence:
|
Fit tyre and wheel assemblies using mounting sequence and techniques Completed |
Evidence:
|
Tension fasteners to team/component supplier specifications and engage fastener locking device, where fitted Completed |
Evidence:
|
Check during and after installation to ensure accurate and complete fitting Completed |
Evidence:
|
Report problems with tyre and wheel assemblies to appropriate persons Completed |
Evidence:
|
Conduct pre-race tyre and wheel preparation
|
|
Obtain recommended start/cold pressures and optimum operating/hot pressures Completed |
Evidence:
|
Set tyre inflation pressures to specifications Completed |
Evidence:
|
Measure and document baseline tyre temperature, ambient and traction surface temperatures Completed |
Evidence:
|
Buff tyres, if specified Completed |
Evidence:
|
Fit and turn on tyre warmers, if specified (and if allowed in category rules) Completed |
Evidence:
|
Conduct post-race tyre and wheel maintenance
|
|
Check tyre pressures and temperatures at specified times and document data Completed |
Evidence:
|
Read tyre contact surface for handling and wear indications and document data Completed |
Evidence:
|
Question driver/rider for assessment of handling characteristics and document data Completed |
Evidence:
|
Source additional data, as required, and identify changes (if any) required to tyres and wheels prior to next race Completed |
Evidence:
|
Clean tyre contact surfaces, as required Completed |
Evidence:
|
Change tyres to different compound or pattern, as required Completed |
Evidence:
|
Change tyre pressures, as required Completed |
Evidence:
|
Tag or mark removed tyres for data audit trail Completed |
Evidence:
|
Clean up and complete documentation
|
|
Pack and store tyres Completed |
Evidence:
|
Assess tyre and wheel stock inventory and document and report to appropriate persons Completed |
Evidence:
|
Maintain tooling and return to storage Completed |
Evidence:
|
Complete team/component supplier documentation Completed |
Evidence:
|